The next commit will make mode_t 32-bits, ino_t 64-bits, nlink_t
32-bits, and off_t 64-bits. However, in the protocol there is no
room for that.
When analyzing the usage of these data types we can see that of
mode_t we currently use 15 bits and that future flags (if copied
from NetBSD) are only of importance to VFS and not to the actual
file system on disk. Therefore we can get away with keeping the
protocol version of mode_t (pmode_t) 16 bits.
At this point it is unlikely that MINIX will support file systems
that can hold more than 2^32 files. Keeping the protocol version of
ino_t (pino_t) 32-bits and exposing it as 64-bits to the rest of the
system is fine.
uid_t and gid_t are already 32-bits, but in behind the scenes they're
16-bits. This is sufficient since we don't support uid/gids larger
than 2^16-1.
off_t will become 64-bits, but the protocol had room reserved
for that since it was revised years ago.
So to make the difference clear between what the protocol supports
and what is exposed to the system, we define protocol version of
these data types.
Change-Id: Ifb883aafb222142e69d6dcc3049a47170b78b3ee
By adding versioning we have a handle on ABI breaking changes in
the protocol or system wide data structures. As of this commit the
protocol version is 0 in order to be compatible with File Servers
that are not yet aware of versioning.
Change-Id: I8f4eca49b506f0c03383c25593e0c44bddac3d66
We're bumping the version to 3.3.0. This needed to be done anyway,
but it is also as a preparation for the next few commits that will
make struct stat identical to NetBSD's. In general all changes will
be fully backwards compatible, except for dynamically linked
binaries. By changing the version number we can provide new versions
of those binaries that are built for the new struct stat/off_t/ino_t.
Change-Id: Idc200bb6f75cdce7604e7706a5e30518496e543b
pkgin now depends on pkg_install. If pkg_install appears after pkgin
in PREINSTALLED_PACKAGES, there will be an error because pkg_install
was installed as a dependency for pkgin.
. data structure that automatically keeps a set
of pages in reserve, to replace sparepages and
possibly re-used in the future for similar situations,
e.g. if in-filesystem-cache block eviction is
implemented and FS asks for a new block
Change-Id: I149d46c14b9c8e75df16cb94e08907f008c339a6
Install /home/ast and /home/bin as part of the system build procedure,
as the setup script is not ran on the arm image.
/home/bin is needed for successful completion of our test suite.
This patch does not change the setup script, as it is not bothered by
those files/directiories being already there, and may be useful during
reinstallation on intel systems.
Change-Id: I358c881df09223c343442673aa0822937f9ea33c
When you provided a string with junk after the terminating nul to a
UNIX domain socket and used bind(2), the canonical path function would
not properly terminate the new string. This caused VFS to return
ENAMETOOLONG on an otherwise valid path name.
Test case is added to test56.
Change-Id: I883b6be23d9e4ea13c3cee28cbb3726343df037f
* Use the same output directory as was previously the standard.
* Add copying of uEnv and cmdline to the obj directory to allow booting from tftp.
* No longer start qemu at the end of the process.
* Use sudo if the script was called as non root user.
Change-Id: I53143b1ce6633e764d173c3eb883c2efa3e6a5b7
Do not hardcode warning and optimisation flags, otherwise the
main options (i.e. DBG, CPPFLAGS) will not work as expected.
You can still provide specific default by using DBG?=<value>.
Doing so leaves the opportunity to override the setting from the
commandline, while the default value from the build system is
then ignored for that particular package.
When crosscompiling, and using build.sh, adding -V DBG=<value> has
this same effect as make DBG=<value>.
Change-Id: Ic610e4d33b945acad64571e1431f1814291e2d84
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.
This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.
. ramdisk: remove some arm-only utilities only used for running
from the shell
. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
boot-time ramdisk files
. change kernel to add "arch" variable so userland knows what
we're running on from sysenv
. make ARM use the regular ramdisk rc file, changed to distinguish
i386-only and ARM-only drivers; requires rootdevname to be set
. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
i386 systems
. change the kernel/arm to have a special case for the memory
driver to load it higher so it can be bigger
. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
SD preparation script arm_sdimage.sh to the git repository in
releasetools/
Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
REQ_PEEK behaves just like REQ_READ except that it does not copy
data anywhere, just obtains the blocks from the FS into the cache.
To be used by the future mmap implementation.
Change-Id: I1b56de304f0a7152b69a72c8962d04258adb44f9
Select(2)ing on UNIX domain sockets was not working properly because
connection state wasn't properly checked/propagated. So selecting for
a read descriptor and closing the write descriptor on the other end
didn't cause select to return. Similarly, read(2) kept blocking while
it should return an error when the other end closed the socket.
Change-Id: I3f5bb52af1a6b03313d508bf915fc838357ba450
. if there is no memory there, it's not writable; this
check bug by the shared memory's writable() method causes
pagefaults not to be handled at all in certain situations,
triggering an assert() in pt_writemap()
. added some assert()s to catch this and similar situations
in the future
Change-Id: Ife89bfab4f9a3aa7bf4e33dfb0b13b89dcd5bb94
The build system distinction between "bootprog" and "service" is
meaningless as boot programs are standard services.
As minix.service.mk simply imports minix.bootprog.mk, reduce confusion
by removing minix.bootprog.mk and placing the rules in minix.service.mk.
Change-Id: I4056b1e574bed59a8c890239b41b1a7c7cad63e8
