- remove non-PCI support, since all supported platforms with at_wini
devices also have PCI support by now;
- correspondingly, stop using information from the BIOS;
- limit each driver instance to one controller, to be in line with
the general MINIX3 one-instance-per-controller driver model; this
limits the number of disks per at_wini instance to four;
- go through the controllers by the order of their occurrence in the
PCI table, thus removing the exception for compatibility devices;
- let the second at_wini instance shut down silently if there is only
one IDE controller;
- clean up some extra code we don't need anymore, and resolve some
WARNS=5 level warnings.
Overall, these changes should simplify automatic loading of the right
disk drivers at boot time in the future.
Change-Id: Ia64d08cfbeb9916abd68c9c2941baeb87d02a806
- change "vid/did" to "vid:did", old form still supported for now;
- allow "vid:did/subvid:subdid" specification in system.conf, in
which case a device will be visible to a driver if the subsystem
VID/DID also match.
Change-Id: I7aef54da1b0bc81e24b5d98f1a28416f38f8b266
Squashed commit of the following:
commit a90721e6275ba6eab733d3bbad7949b1d959faca
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 20:24:25 2013 +0200
3.3.0 sync fixes
Change-Id: Ic91e326623f6dbad58754152c4a632e4406f1117
commit f76695798821432c57fcdccc60208f06e9c9b028
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Oct 2 13:37:49 2013 +0200
keymaps: improve keypad slash support
Now that the keymaps can distinguish between the regular slash key
and the slash key on the numeric keypad, we can avoid localization
of the latter.
Change-Id: I20ead7d26a9baa82f5a522562524fd75d44efb42
commit 1bba92dc81840d55959925c36a5e387588e10710
Author: Mikal Villa <mikal.villa@gmail.com>
Date: Wed Oct 2 12:30:03 2013 +0200
Norwegian keymap
Change-Id: I181234afc8f1a058e92af6c1fe88979463aaff45
commit 916d1652d6a5fc7502dabca5d07e4aa598ce3fee
Author: Thomas Cort <tcort@minix3.org>
Date: Fri Sep 6 21:40:42 2013 -0400
Importing usr.bin/uname
Change-Id: I4c316221e288edd839e26a2af4cb59f28bf722c1
commit 03c06a560ef8d83eae5253ad0c22de0caa56ea5c
Author: Thomas Cort <tcort@minix3.org>
Date: Fri Sep 6 21:40:31 2013 -0400
uname: normalize release and version
Most systems provide the full version number in the
'release' field and the kernel version in 'version'.
Minix used to split the full version number between
release and version which caused problems for pkgsrc
and other applications. This patch brings Minix's
uname in line with other systems such as NetBSD.
It also brings the getty banner in line with NetBSD.
Old Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3
version->2.1
machine->i686
New Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3.2.1
version->Minix 3.2.1 (GENERIC)
machine->i686
Change-Id: I966633dfdcf2f9485966bb0d0d042afc45bbeb7d
commit f86d1a0245060845e902d8f3aa415fde3b2d7a0f
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Sep 19 10:57:10 2013 +0200
Replacing timer_t by netbsd's timer_t
* Renamed struct timer to struct minix_timer
* Renamed timer_t to minix_timer_t
* Ensured all the code uses the minix_timer_t typedef
* Removed ifdef around _BSD_TIMER_T
* Removed include/timers.h and merged it into include/minix/timers.h
* Resolved prototype conflict by renaming kernel's (re)set_timer
to (re)set_kernel_timer.
Change-Id: I56f0f30dfed96e1a0575d92492294cf9a06468a5
commit e3b7451fb77cb652b3d7a62e74e5071d6fed3211
Author: Lionel Sambuc <lionel@minix3.org>
Date: Wed Oct 2 10:56:24 2013 +0200
ARM serial driver: Comment termios_baud_rate.
The B0-B115200 defines are flags, and not the actual speed they
represent.
This fixes an incoherency for B0 handling, and documents why it is
required to call the function again after changing the speed flag.
DFL_BAUD is set to one of the flag, so to translate it to an actual
speed, the function calls itself again, which will always be able to
finish without inducing another recursive call.
Change-Id: I04ebfaefee31a88d05f0b726352d1581a966147b
commit 48432465aea5996af40fcee60f304a25a859f1dd
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Oct 1 23:25:01 2013 +0200
TTY: skip /dev/log checks if console is serial
It is unclear why /dev/log has its own open/close rules, but those
rules conflict with serial console redirection. This does not solve
the root of the problem, but it puts back in place more or less the
same workaround that was already in place before the TTY overhaul.
Change-Id: Ib53abbc28a76c1f2b0befc8448aeed0173bc96a5
commit 6914f1b1fdf39dd5e5161eda406592ee3beb110f
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:45:42 2013 +0200
Corrections to keep VFS ABI-compatible
Change-Id: Id8a53a687577c1b6f83c11c2e5fb0b8ed1cd2a08
commit 5f2721f5c672330afa589562bb01e163e5eb4e00
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:35:11 2013 +0200
Remove support for obsolete 3.2.1 ABI
Change-Id: I76b4960bda41f55d9c42f8c99c5beae3424ca851
commit 68b7ece9e806f4d52086983d45bc436e2fd21d88
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 22:59:44 2013 +0200
Fix various file system warnings
Change-Id: Ied10498c3ae14f9f2fd06914f23239df330fa296
commit bf9fe26adba1e7cdb4126e920513475c493380e6
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:22:13 2013 +0200
VFS/FS: replace protocol version with flag field
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
commit c9dee913657b61d3dc582399e673d6b7d6893f9c
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Apr 19 13:16:51 2013 +0200
usr.bin/stat Update
Change-Id: I029160c73baab1b3465bc5397a36c55886db225b
commit 6696977375f7a1d459ccd89ca732e1fe894eeeff
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Apr 19 09:54:51 2013 +0200
almost aligned ioctl prototype
Change-Id: I7f3eaa99d2a9767f71e8387cea5c7f56dcb28f99
commit 70b4c94174621116bdad888ec4978e6601dccf83
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 14:42:15 2013 +0200
32 to 64 bits fsblkcnt_t and fsfilcnt_t.
Change-Id: I432229143c85cd178262b802a76ac606801ac59a
commit 6cc1244a4543d1ea6882a555905b46abfe36c8b6
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 11:08:16 2013 +0200
moving prototypes to lib.h
Change-Id: If53d3f5ee761b10e0f3d4346a0c5b39ba7901c65
commit bc5de5f0a1f379f60cdab6f620d1cf0b58391abf
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 11:07:44 2013 +0200
struct uucred
Change-Id: Ia97cb6c38bb566be30d568a252ae7b76142a21dd
commit 7cef2f014e2596746900f3300744c33c660fbfa3
Author: Lionel Sambuc <lionel@minix3.org>
Date: Tue Apr 16 11:48:54 2013 +0200
Alignement on netbsd types, part 1
The following types are modified (old -> new):
* _BSD_USECONDS_T_ int -> unsigned int
* __socklen_t __int32_t -> __uint32_t
* blksize_t uint32_t -> int32_t
* rlim_t uint32_t -> uint64_t
On ARM:
* _BSD_CLOCK_T_ int -> unsigned int
On Intel:
* _BSD_CLOCK_T_ int -> unsigned long
bin/cat is also updated in order to fix warnings.
_BSD_TIMER_T_ has still to be aligned.
Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7
commit 7f17cc1299be7b37f264905843c20eed48b1c276
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Aug 23 20:27:27 2013 +0200
Adapt the type used for adjtime_delta
clock_t is currently a signed type, but in NetBSD this is not the
case. As we plan on aligning our types we have to change this as this
prevents negative delta from being correctly used.
Change-Id: I9bccdee2b41626b0262471dc1900de505a1991a7
commit 6e7038f040b6e869d54d4ee37c4b12197463eb83
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:01:19 2013 +0200
Butchered version of "Bumping version.."
Change-Id: Ieb5f31fe037bcf45cc86a906f983a0ab3f636468
commit 905a73dd50e2d14714d1c3ef5a2e033c4476a731
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 18:57:04 2013 +0200
Trimmed version of "VFS: use 64-bit file..."
Change-Id: I1b53ef05e939f6afed97f507d443a1d60ed81a21
commit 0a6d8e38369e339c9873510442105ba987c5f10b
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 18:37:39 2013 +0200
Trimmed version of "stat.h: remove some big_ types"
Change-Id: I6c17d6e5e9d2ab4c1bbf33e461cec4c37b870266
commit 8aaf8adf38b17fb3607e2efe17fd0551f5109352
Author: Thomas Veerman <thomas@minix3.org>
Date: Thu Mar 7 14:46:21 2013 +0000
Define protocol version of {mode,ino,uid,gid}_t
Change-Id: Ia2027749f2ce55a561d19eb895a5618505e9a2ac
commit 4f1ba5747a58d6ccbc120298bd063fb0b15b9d1c
Author: Thomas Veerman <thomas@minix3.org>
Date: Mon Mar 25 21:09:10 2013 +0000
VFS-FS protocol: add versioning
Change-Id: Ice6fbfd4b535b7435653fa08b27a3378d1cfdbf8
commit 7d64ee23ff70b169cdada1a8d8512d96c93c8075
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 28 14:46:21 2013 +0200
Input infrastructure, INPUT server, PCKBD driver
This commit separates the low-level keyboard driver from TTY, putting
it in a separate driver (PCKBD). The commit also separates management
of raw input devices from TTY, and puts it in a separate server
(INPUT). All keyboard and mouse input from hardware is sent by drivers
to the INPUT server, which either sends it to a process that has
opened a raw input device, or otherwise forwards it to TTY for
standard processing.
Design by Dirk Vogt. Prototype by Uli Kastlunger.
Additional changes made to the prototype:
- the event communication is now based on USB HID codes; all input
drivers have to use USB codes to describe events;
- all TTY keymaps have been converted to USB format, with the effect
that a single keymap covers all keys; there is no (static) escaped
keymap anymore;
- further keymap tweaks now allow remapping of literally all keys;
- input device renumbering and protocol rewrite;
- INPUT server rewrite, with added support for cancel and select;
- PCKBD reimplementation, including PC/AT-to-USB translation;
- support for manipulating keyboard LEDs has been added;
- keyboard and mouse multiplexer devices have been added to INPUT,
primarily so that an X server need only open two devices;
- a new "libinputdriver" library abstracts away protocol details from
input drivers, and should be used by all future input drivers;
- both INPUT and PCKBD can be restarted;
- TTY is now scheduled by KERNEL, so that it won't be punished for
running a lot; without this, simply running "yes" on the console
kills the system;
- the KIOCBELL IOCTL has been moved to /dev/console;
- support for the SCANCODES termios setting has been removed;
- obsolete keymap compression has been removed;
- the obsolete Olivetti M24 keymap has been removed.
Change-Id: I3a672fb8c4fd566734e4b46d3994b4b7fc96d578
commit 34b46a5c4f4819806da51b7899718eb22ae64da2
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Sep 27 11:56:29 2013 +0000
TTY: allow selecting on translated minors
Due to the existence of /dev/console and /dev/log, and the new
"console=" setting, it is now possible that a single non-PTY object
(e.g. serial) is accessible through two different minor numbers. This
poses a problem when sending late select replies (CDEV_SEL2_REPLY),
because the object's minor number can not be used to identify the
device. Since selecting on such objects through translated minor
numbers is actually required, we now save the minor number used to
initiate the select query in order to send a late reply.
The solution is suboptimal, as it is not possible to use two different
minors to select on the same object at once. In the future, there
should be at least one select record for each minor that can be used
with each object.
Change-Id: I4d39681d2ffd68b4047daf933d45b7bafe3c885e
commit f358ba2c481fb86fd02017fd6b36066ea8f61f79
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 17:35:15 2013 +0200
Take LOG out of the boot image
Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949
commit 6d9c0948daa9d081c4cebabd8bc05d9002fbe344
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 15:03:20 2013 +0200
Kernel: make SIGKMESS target process list dynamic
The set of processes to which a SIGKMESS signal is sent whenever new
diagnostics messages are added to the kernel's message buffer, is now
no longer hardcoded. Instead, processes can (un)register themselves
to receive such notifications, by means of sys_diagctl().
Change-Id: I9d6ac006a5d9bbfad2757587a068fc1ec3cc083e
commit 41a5194722435a573ba3f5a42ae745164ba5d4b2
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 00:58:46 2013 +0200
Rename SYSCTL kernel call to DIAGCTL
Change-Id: I1b17373f01808d887dcbeab493838946fbef4ef6
commit 0d370e8db6a9bd0dd180179133745bfdce69a7b9
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 20:13:59 2013 +0200
Prevent Jenkins from breaking on old df(1)
Change-Id: Ie8e1758bd9de4d5c95c597302f80d568058fbb68
commit f3f35bf3b108e43df7f8deeacadbfac61ba65c37
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:09:47 2013 +0200
Add testvnd.sh test script
As part of this, change the "run" script to allow certain scripts to
be run as root only.
Change-Id: I846e41037f9d4f6c7fc0b5ea8250303a7bd72f5d
commit 2f200b12e2cc00b9cfa5bfb7cc2e4627799f4080
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:06:46 2013 +0200
Import NetBSD vndconfig(8)
The tool has been changed heavily to match our VND driver model.
NetBSD is in the process of renaming it from vnconfig(8) to
vndconfig(8). To keep things in sync, we have to play along.
Change-Id: Ie86df184f03ab00573ea76b43c9caa0412e8321d
commit d5998fd28e51eb21e211c326bdd1b84322700382
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:02:17 2013 +0200
Add VND driver, providing loopback devices
Change-Id: I40fa695e28c67477a75383e6f1550e451afcab41
commit 318e281a2827cf10acb024822976d107267d5c94
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:55:15 2013 +0200
VFS: add dupfrom(2) call
This call copies a file descriptor from a remote process into the
calling process. The call is for the VND driver only, and in the
future, ACLs will prevent any other process from using this call.
Change-Id: Ib16fdd1f1a12cb38a70d7e441dad91bc86898f6d
commit cf669ab888662d4152d8b4353e4166775dca08d4
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 11:46:08 2013 +0200
tests: do not skip installed shell tests
When installed, the test scripts lose their ".sh" suffix, causing them
to be skipped by the "run" script. With this patch, the tests are no
longer specified with ".sh" suffix in the run script, and the suffix
is added automatically as necessary.
Change-Id: I0b72312e79992b9818559c6546a0e52cd95184c2
commit 36cfed7ef5aa345e25704f959d08afb6e3d0a5d3
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:41:56 2013 +0200
blocktest: prepare to be run as part of tests
- fail SEF initialization if any of the subtests failed, so that the
party invoking the "service up" can tell whether the test succeeded;
- add "nocontig" option, because VM isn't particularly good at
allocating contiguous memory;
- add "silent" option, because it floods the console otherwise;
- allow the device size to be smaller than the maximum transfer size;
- install files to installed test directory.
Change-Id: I45c818f817c11d90c5f94ae26a2fc49e36e6761e
commit bd282f39f7d646afe1025563044f3bcc278c2e3c
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:38:36 2013 +0200
Enable devname(3)
There is no support for a device name database yet, so this call is
expected to be fairly slow.
Change-Id: I73aa5f267e2b6921b7d3bbdcc4beac463931132c
commit c1e5ff56bdd2e760dc00ba2f89e9b4a615c89c78
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 15 13:09:00 2013 +0200
libbdev: be less noisy about clean driver restarts
Change-Id: Ie02a459c9b544d361ab00bac431ef99de53b0c5f
commit 27dd4c8924afabd3118e3988607f99871d8500ac
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 14 14:43:53 2013 +0200
Straighten ioctl.h
- include all ioctl subheaders, properly listing all letters;
- change FBD's ioctl calls to use 'B' instead of 'F', in
preparation of the VND driver.
Change-Id: Ia718979568cc057f47cf505a89238d5b3b6695d4
commit 8fa683c5fc30c354fee376ef15158f79a7ae2e3c
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 15 18:55:42 2013 +0200
VM: readd support for forgetting cached FS blocks
Not all services involved in block I/O go through VM to access the
blocks they need. As a result, the blocks in VM may become stale,
possibly causing corruption when the stale copy is restored by a
service that does go through VM later on. This patch restores support
for forgetting cached blocks that belong to a particular device, and
makes the relevant file systems use this functionality 1) when
requested by VFS through REQ_FLUSH, and 2) upon unmount.
Change-Id: I0758c5ed8fe4b5ba81d432595d2113175776aff8
commit de1b9ea6e0387ad002cc709bfc440c0b7b37a514
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 14:50:18 2013 +0200
filter: use libblockdriver
Change-Id: Ifbca2482e996ddca58036d45f557165e636fb3fa
commit 1ac96993033b39dfee21eabd3eb9ff2d6b8df97c
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 20:25:01 2013 +0200
Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.
Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
commit c6ee04eaec08b3101c440a9b84a4d728285586c3
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 16:06:37 2013 +0200
Remove support for reopening character devices
Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.
- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
invalidation; instead, make get_filp* fail all calls on invalidated
FDs except when obtained with the locktype VNODE_OPCL which is used
by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
the situation that a FD is in use if its slot points to a filp; use
FILP_CLOSED as single means of marking a filp as invalidated.
Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
commit ba7c49ff69b09bfe5301774c1d2f41a0f75c2829
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 12:19:08 2013 +0200
VFS: rework device code
- block the calling thread on character device close;
- fully separate block and character open/close routines;
- reuse generic open/close code for the cloning case;
- zero all messages to drivers before filling them;
- use appropriate types for major/minor device numbers.
Change-Id: Ia90e6fe5688f212f835c5ee1bfca831cb249cf51
commit 6244eaf06240f02833f21313f788e3087f3dccf0
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 9 00:04:12 2013 +0200
Make PFS backcalls regular VFS calls
- prefix them with VFS_ as they are going to VFS;
- give these calls normal call numbers;
- give them their own set of message field aliases;
- also make do_mapdriver a regular call.
Change-Id: I2140439f288b06d699a1f65438bd8306509b259e
commit 29a324bc6ced0a8c5f7efa604214aa1bc26d2ff5
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 12:48:10 2013 +0200
TTY: use libchardriver; clean up
- writing to a PTY master side blocks if there is not already a
blocked reader on the slave side, and select now reflects this;
- internally, TTY now uses a test based on "caller != NONE" rather
than "grant != GRANT_INVALID" to identify whether a call is
currently ongoing;
- "offset" fields have been removed as they equal the corresponding
"cum" fields;
- improved variable typing and function naming here and there;
- various other small fixes.
Change-Id: I6b51452888942e864b4e034e8c8490576184a23e
commit 77ac2ac06355dc2aac382761f9a9fb28c1129bd1
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 01:13:59 2013 +0200
VFS: select(2) fixes
- check each file descriptor's open access mode (filp_mode);
- treat an error returned by a character driver as a select error;
- check all filps in each set before finishing select;
- do not copy back file descriptor sets if an error occurred;
- remove the hardcoded list of supported character major devices,
since all drivers should now be capable of responding properly;
- add tests to test40 and fix its error count aggregation.
Change-Id: I57ef58d3afb82640fc50b59c859ee4b25f02db17
commit 52008671f66c28199b28f9203349777321f46297
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 01:07:28 2013 +0200
Retire EBADIOCTL in favor of ENOTTY
Change-Id: I6bd0e301d21ab7f2336e350e7e6e15d238c2c93d
commit 5495625b6fec35117c99b137bf141904c1355f4a
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 4 15:42:36 2013 +0000
libnetsock: use libchardriver
Change-Id: Ia5b780cad0b0c636db9bd866c7223da0d38ef6ea
commit d953501984b8f54ad8670df7337c5632a48e1820
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 00:50:36 2013 +0200
LWIP: move chardev message parsing into libnetsock
Change-Id: Ie23fd003c9fa35811548f388c8e9b55e8d9de8d7
commit 57043b1d6c87892d222afafe07d50b52a7ff1b35
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 9 14:53:28 2013 +0000
INET: use libchardriver
Change-Id: Icf8a1a5769ce0aede1cc28da99b9daf7d328182c
commit f5fb4390e6b217897f09cfe92aa34053bbf56c24
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 02:00:20 2013 +0200
PFS: use libchardriver; clean up
- simplify and repair UDS request handling state machine;
- simplify interface used between internal modules;
- implement missing support for nonblocking I/O;
- fix select implementation;
- clean up global variables.
Change-Id: Ia82c5c6f05cc3f0a498efc9a26de14b1cde6eace
commit 1d6a7a20e800dde581377d05a58673ef7486b61a
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:59:20 2013 +0200
libaudiodriver: use libchardriver
Change-Id: I299d58d110ad14b69076276ba46c4325875c34ca
commit c7ed4e35b4d7e59305815c0f701522948749874d
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:57:41 2013 +0200
printer: use libchardriver
Change-Id: Ifa3cabeada74c32df2613b8279c00f86e831c775
commit b48201c328cb31d49a968ae7a97c7f40270e4e47
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:49:38 2013 +0200
libchardriver: full API rewrite
The new API now covers the entire character driver protocol, while
hiding all the message details. It should therefore be used by all
new character drivers. All existing drivers that already made use of
libchardriver have been changed to use the new API.
As one of the most important API changes, support for scatter and
gather transfers has been removed, as several key drivers already
did not support this, and it could be supported at the safecopy
level instead (for a future readv/writev).
Additional changes include:
- respond to block device open requests to avoid hanging VFS threads;
- add support for sef_cancel.
Change-Id: I1bab6c1cb66916c71b87aeb1db54a9bdf171fe6b
commit c6682c308a5a97e6fd75dbf32ad3efd23a2b8a35
Author: David van Moolenbroek <david@minix3.org>
Date: Thu Aug 1 18:20:33 2013 +0200
blocktest: add support for no alignment
Some block drivers do not impose any alignment requirements, and this
patch allows such block drivers to pass the test set. As a side effect,
minimal support for min_write is added, but this part of blocktest is
in need of further improvement.
commit 3593e262bc06e6e49fe2cb4a7b42bfab460986c8
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Apr 18 00:04:28 2012 +0200
libutil: let opendisk(3) try /dev
If a device node is given without path, and opening the node fails
initially, prepend "/dev/" to the node name and try opening again.
This is more in line with NetBSD behavior.
commit de1dd17ebcc546dc6341e595cee6b5e1180ade64
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 23:57:32 2013 +0200
Block drivers: make IOCTL request unsigned long
The block driver protocol and libblockdriver's bdr_ioctl hook are
changed, as well as the users of this hook. Other parts of the system
are expected to change accordingly eventually, since the ioctl(2)
prototype has been aligned with NetBSD's.
Change-Id: Ide46245b22cfa89ed267a38088fb0ab7696eba92
commit cc8c282ae20f774d72fb5b1473e44aaf40a00f99
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Jul 27 00:49:49 2013 +0200
Block protocol: add user endpoint to IOCTL request
I/O control requests now come with the endpoint of the user process
that initiated the ioctl(2) call. It is stored in a new BDEV_USER
field, which is an alias for BDEV_FLAGS. The contents of this field
are to be used only in highly specific situations. It should be
preserved (not replaced!) by services that forward IOCTL requests,
and may be set to NONE for service-initiated IOCTL requests.
Change-Id: I68a01b9ce43eca00e61b985a9cf87f55ba683de4
commit 2838190944c3d2320d5aac28ae1418da5a90d0a5
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Jul 27 00:49:49 2013 +0200
Block protocol: use own [RW]_BIT definitions
The original R_BIT and W_BIT definitions have nothing to do with the
way these bits are used. Their distinct usage is more apparent when
they have different names.
Change-Id: Ia984457f900078b2e3502ceed565fead4e5bb965
commit f54a06c5fba8b96bbaba43942f51a73c1ee917b4
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 23:35:15 2013 +0200
libblockdriver: expose BLOCKDRIVER_MAX_DEVICES
This constant determines the range of valid device_id_t values that
a block driver can return from the bdr_device hook: a value between
0 and (BLOCKDRIVER_MAX_DEVICES - 1) inclusive.
Change-Id: I80fac469e88ac13d4b869007e6f2c2f7569da433
commit 2032299e680852b80fe3969130d46550bf89d8be
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 13:33:00 2013 +0200
libblockdriver: various updates
- internal structure rearrangement;
- respond to char device open requests to avoid hanging VFS threads;
- make drivers use designated initializers;
- use devminor_t for all minor device numbers;
- change bdr_other hook to take ipc_status and return nothing;
- fix default geometry computation;
- add support for sef_cancel.
Change-Id: Ia063a136a3ddb2b78de36180feda870605753d70
commit 35504ddaed58ee747ed3e11e29bb1d793d071445
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 1 14:34:17 2013 +0200
Block drivers: reply ENOTTY to unknown IOCTLs
Change-Id: Ie2e82d2491d546f4dd73b009100646e249a147b5
commit 45dc155af3b0f9993fd02025866ed7c824b94ac6
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Jul 28 14:03:07 2013 +0200
Move SUB_PER_DRIVE definition into minix/drvlib.h
commit c15b4f7c771f5486a9766aa0fec866eb8c7489c2
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 2 17:34:44 2013 +0200
VFS: update filp_pos on chardev I/O (workaround)
Previously, reading from or writing to a character device would not
update the file position on the corresponding filp object. Performing
this update correctly is not trivial: during and after the I/O
operation, the filp object must not be locked. Ideally, read/write
requests on a filp that is already involved in a read/write operation,
should be queued. For now, we optimistically update the file position
at the start of the I/O; this works under the assumptions listed in
the corresponding comment.
Change-Id: I172a61781850423709924390ae3df1f2d1f94707
commit 986012fcf657eabd9a89b45e81277009ce0cf47c
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 2 13:45:02 2013 +0200
I2C: change BUSC_I2C_xxx to use own protocol
Previously it would use bits of the character driver protocol, which
will change heavily. In the new situation, the BUSC_I2C_xxx requests
use a protocol more in line with the PCI protocol, with the reply code
in m_type.
Change-Id: I51597b3f191078c8178ce17372de123031f7a4c4
commit 38b010966e38a119b4ceb6ec7b5e0e1ae5df86c0
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 16:13:37 2013 +0200
tests: add test77 for opening/closing PTYs
Change-Id: I30e3418f75137aa08037fa6581ff3d4cce32a114
commit 40b4156afb5ca47b4cac51a503790a65528a3efa
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 16:08:25 2013 +0200
TTY: fix for PTY open/close logic
Opening and closing the master side of a pseudo terminal without
opening the slave side would result in the pseudo terminal becoming
permanently unavailable. In addition, reopening the slave side
would be possible but not allow for I/O. Finally, attempting to
open an in-use master would wipe its I/O state. These issues have
been resolved.
Change-Id: I9235e3d9aba321803f9280b86b6b5e3646ad5ef3
commit 3fad8d48237c70c5d26cb12af1214e96ae3b547e
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 18:48:56 2013 +0200
tests: remove select subdirectory
This test set has been obsoleted by test40.
Change-Id: I55439152824906778ad07d409dfb327ac10bea70
commit 6b913b2d113c9faa5b5adbcd01fd6c5c7490ce7c
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 18:43:23 2013 +0200
tests: add test76 for interrupting VFS operations
Change-Id: Ic436cac61de8c42e0c7ee2d442c647528654cde9
commit e269f19d9f1087db57b70b7794a8d36d51a67aae
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Aug 28 13:08:16 2013 +0200
VFS: fix interruption of blocking pipe operations
POSIX states that when interrupted, partially successful pipe
operations should return the partial result rather than EINTR. VFS
previously wouldn't look at the partial result, and not clear it
either, which would result in a panic upon the next pipe operation.
Change-Id: Ia1eb72b4b77394051444e63a1390d49bb315eb04
commit 2ba8242dd73b4854d064caa6f3059cddec5a64fc
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 00:57:16 2013 +0200
libmthread: do not dump stack for free threads
Change-Id: Ic438a252f5bddaf1513f554c71173e6fffb0c674
commit 7e2989e2bf14230965767d7ef1bf58192c3f6d9c
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 14:00:50 2013 +0200
VFS: worker thread model overhaul
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:
- all active worker threads are now always associated with a process,
and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
worker_start() function; the number of worker threads has
consequently been increased by one;
- saving and restoring of global but per-thread variables is now
centralized in worker_suspend() and worker_resume(); err_code is now
saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
than just an optimization and only applied to processes operating on
a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
the main thread or a worker thread, when resuming execution of a
thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
force a thread to run.
Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
commit 67ef9a11c2735b3fba17efcde2893e79fe64e6cd
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Aug 28 15:58:30 2013 +0200
Retire ptrace(T_DUMPCORE), dumpcore(1), gcore(1)
The T_DUMPCORE implementation was not only broken - it would currently
produce a coredump of the tracer process rather than the traced
process - but also deeply flawed, and fixing it would require serious
alteration of PM's internal state machine. It should be possible to
implement the same functionality in userland, and that is now the
suggested way forward. For now, also remove the (identical) utilities
using T_DUMPCORE: dumpcore(1) and gcore(1).
Change-Id: I1d51be19c739362b8a5833de949b76382a1edbcc
commit 7016b1cd1b7932a91d7a82ac7ff903cd136f4861
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:42:51 2013 +0200
VFS: process char driver replies from main thread
Previously, processing of some replies coming from character drivers
could block on locks, and therefore, such processing was done from
threads that were associated to the character driver process. The
hidden consequence of this was that if all threads were in use, VFS
could drop replies coming from the driver. This patch returns VFS to
a situation where the replies from character drivers are processed
instantly from the main thread, by removing the situations that may
cause VFS to block while handling those replies.
- change the locking model for select, so that it will never block
on any processing that happens after the select call has been set
up, in particular processing of character driver select replies;
- clearly mark all select routines that may never block;
- protect against race conditions in do_select as result of the
locking that still does happen there (as is required for pipes);
- also handle select timers from the main thread;
- move processing of character driver replies into device.c.
Change-Id: I4dc8e69f265cbd178de0fbf321d35f58f067cc57
commit 9aa8d1e3f53c08a9521258d27fa121219255ed3c
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Aug 25 00:26:38 2013 +0200
VFS: properly cancel select queries on unpause
Change-Id: I16e71db3f5c1bcc7ba6045bc9f02b13d71dc31eb
commit 538bb4cecfbad4cc8b9f4204f9912e70a5f61ccf
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:33:56 2013 +0200
VFS: remove support for sync char driver protocol
Change-Id: I57cc870a053b813b3a3fc45da46606ea84fe4cb1
commit c1e783a7e130c75e9bfdfa73553162a1d795fc73
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:00:44 2013 +0200
VFS: remove FP_BLOCKED_ON_DOPEN
These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
commit 42a9a183f74cc198cd7ae39b8270beeb58578c7d
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 12:18:27 2013 +0200
PFS: remember request information for IOCTLs
Not doing so caused PFS to commit protocol violations by relying on
stale information when sending replies. This stale information always
happened to be correct, which is why the problem went unnoticed.
Change-Id: Ia42ca670718d6e731193cd2c34a3ff455f8a94d3
commit e02b1fbdfb51099c708836e6a00268b10b9bb7c2
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 11:14:03 2013 +0200
Retire the synchronous character driver protocol
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
commit 46d1a1098a2a7d5ca7c4110b7d24212f7d14dab4
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 10:48:34 2013 +0200
Sync char protocol: add nonblocking transfer flag
The async char protocol already has this, so this patch closes the
gap between the two protocols a bit. Support for this flag has been
added to all sync char drivers that support CANCEL at all.
The LOG driver was already using the asynchronous protocol, but it
did not support the nonblocking transfer flag. This has been fixed
as well.
Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f
commit 4c2553666f86231eb0a0124b52f542fea66c23be
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 24 12:29:39 2013 +0200
VFS: set w_drv_sendrec only when needed
As with w_task, this ensures that the field remains cleared if it is
not used. Without this, worker_stop could mistakenly identify a thread
as talking to a device driver rather than a (crashed) file server.
Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376
commit 37e76dea4202e58cd918738b6b13f205c29c5623
Author: Thomas Veerman <thomas@minix3.org>
Date: Sat Aug 24 12:23:41 2013 +0200
VFS: set w_task only when needed
It was always set, but not always cleared, when talking to asynchronous
drivers. This could cause erratic behavior upon a driver crash.
Normally, a worker thread's w_task field is set when it's about to
communicate with a driver or FS. Then upon receiving a reply we can
do sanity checks (that the thread we want to wake up was actually
waiting for a reply). Also, when a driver/FS crashes, we can identify
which worker threads were talking to the crashed endpoint and handle
the error gracefully.
Asynchronous drivers are a bit special, though. In most cases, the
sender of the request is not interested in the reply (the sender was
suspended and only wants to know whether the request was successfully
caried out or not). However, the open request is special, as the reply
carries information needed by the sender. This is the only request
where a worker thread actually yields and waits for the result. This is
also the only case where we're interested in setting w_task for
asynchronous drivers.
Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379
commit e990e9c7f067ac67fd455c4a4eec472702a01929
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Aug 19 20:34:15 2013 +0200
Import NetBSD df(1)
Change-Id: Ia60f8b23b961e4132efece1e7e38f0d63597c13b
commit fce9d229ff353aa132bf9f72c5f0262a20be4e1b
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:33:43 2013 +0200
Enable getmntinfo(3)
Change-Id: Id9d11a67cdcad331a52030127f7c7ead3c847919
commit 598d91b5fd73ffefa6702798ed4c5c1e01722e0e
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 00:49:07 2013 +0200
test55: add tests for getvfsstat(2)
Change-Id: Iad4567068a82bb0e780891a478ba5a06b63f1d48
commit 52b521faa0aa9ba5236a890b3a42ac0bc0a0d1bd
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:28:23 2013 +0200
Implement support for [f]statvfs1(2)
The [f]statvfs(3) calls now use [f]statvfs1(2).
Change-Id: I56c92fe1c70670f476631c4a50e47351562712c6
commit ca5da8f6c0e5d9515ddc4adaf3e8515740859d3e
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:39:47 2013 +0200
Implement support for getvfsstat(2)
Change-Id: I4680c071b94fa855edfb6220b03cff6b20f3c1c9
commit a269463c47cfb4b9223087da16bc0608a37fc16c
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:37:18 2013 +0200
Redo mount(2)/umount(2) ABI
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: Ia9ed4566d88af5239749c57274312be26bb61448
commit e94b0816548a65beb37c09837fd8c51aa922f736
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:35:35 2013 +0200
Align "struct statvfs" with NetBSD
This is a requirement for implementing calls such as getmntinfo(3).
VFS is now responsible for filling in some of the structure's fields.
Change-Id: I457b463c70ea2f326b9c50de954a91cfefba0065
commit da756158a15ac245ceff5e35517fa1621d55ad64
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 00:55:49 2013 +0200
VFS/FS: remove fstatfs(2) and REQ_FSTATFS
The fstatfs(3) call now uses fstatvfs(2).
Change-Id: Ic6bbb040e1a8f01aaffe1a6a809dd4c7a2eae2f6
Change-Id: I14141beaf9804e10d9cf3de706bdc9b9d9cc947b
test75 sometimes false-fails if something else is going on
at the same time, presumably because the child doesn't spin
enough to register a nonzero getrusage() cpu time value, as
spin() uses the real time to limit the spinning.
this change forces spin() to do a minimum amount of spinning
before exiting, regardless of scheduling.
Change-Id: I57c63d22969bba418f36bcc8c5ace2b6fb445968
Define the file name templates as char arrays to prevent the
toolchain from mapping them read-only.
Change-Id: Ib2395587b62d4a6ff19c88adc4246dcb41344a53
. make filesystems on primary partitions to make it
easier on the minix partition util
. so sfdisk isn't required as an external tool
. also make partition and hitherto x86-only utilities
arch-independent
Change-Id: Ib4e07e45d038d084dde1858917d3deb7f0616532
Before this change overflowing the free running clock counter
between the time the timer was read and the time the overflow
check was done resulted in read_tsc_64 returning a to high value.
Change-Id: I1022f271213647f720477c4121d45f0c965456c6
When we start using a new pagetable (for a new process)
the last part is to ensure the pagetable itself can be
accessed by VM. This is done in pt_bind by updating
the "pagetable of pagetables" and we want this mapping
to match other mappings to the l1 pagetable.
Change-Id: I7b506fd75553917fdc1abd25b55e4b2f25ccbf8d
When copying data from cacheable memory also use cacheable
attributes when creating temporary mappings.
Change-Id: I0e8380293fb4edaafba49f6262983ad86a5350c5
* Allow to change the timer frequency using the hz paramter.
* Unmask the interrupt only after registering the handler.
* Pass the hz parameter in the command line.
A script that creates a HD image ready to be booted by an x86
emulator, ready to work in a crossbuild environment.
It's really just for qemu/kvm as there's no boot code in
the MBR and no bootloader installed so we rely on the in-kvm
multiboot implementation for now. This is very convenient for
passing args too.
To minimize reliance on external tools, we use the Minix
'partition' utility to write the partition table of the HD
image, which therefore has to be compiled natively.
. new script releasetools/x86_hdimage.sh
. natively compile minix 'partition' utility
. make <machine/partition.h> 64-bit safe for it
Change-Id: If645b4691536752271e0b8a8ed59a34f248dace4
. add dependency of headers on debug.d
. put the generated headers in the right dir
. also resilience against future ELAST duplicate errno
Change-Id: I9d10702c8e09699a40138193f14defe902399da6
The sht21 temperature and humidity sensor holds the i2c bus while
an ADC conversion is in progress. For example, a temperature
measurement is requested, a read operation is started, and the
sht21 doesn't respond to the read request until the result of
the measurement is ready. The conversion time isn't constant.
On rare occations (one in hundreds of samples) the timeout in the
i2c driver expires returning an error.
The example code from Sensirion, the sht21's manufacturer, suggests
a bus timeout of 1 second to accommodate the sht21. This commit
increases the bus timeout to 1 second. The timeout is only reached
when chips do not respond normally, so the change doesn't affect the
performance of any other drivers.
Change-Id: I57b0f958a5d0b69b221af380b771fe67401ff604
Many i2c device drivers used similar code to access registers on
the ICs they drive. This commit implements that functionality in
libi2cdriver and updates the drivers to use the library instead of
their own register access functions. The net result is 375+ fewer
lines of code and less work for people developing new drivers.
The two exceptions were cat24c256 and parts of tda19988. They access
the bus in uncommon ways. It doesn't make sense at this time to
move their read/write functions into libi2cdriver.
Change-Id: Id8280b71af33b710a49944d7f20a7262be9f5988
A copy and paste error caused a few lines of code to be duplicated.
This patch removes the excess code.
Change-Id: I7313efb537e2a4102fb25ce05782e82ae0c84285
To provide EDID to fb, the TDA19988 implements the block device
protocol with libblockdriver. To properly use the library,
blockdriver_announce() should be called by the driver.
Issue reported by David van Moolenbroek
Change-Id: Id55d159d91502a9afac5c1d4de0fee1e8945b5c1
This is done by adding a dependency on ${GNUHOSTDIST:H}/.gitignore
for both realall and realinstall targets.
Change-Id: If086a6c02ab20a8cd4bbb3597d7203cf22dce796
. full number was needed to reliably trigger the race
condition
. takes a bit too long (7 mins on fast x86 hardware) for a
condition that "can't" happen again, so let's cut the iteration
count and trust that the test will trigger soon enough for
a similar condition in the future.
Change-Id: I2d38b87c25327adbbff91b7db6191648aa1dd8fd
. turns on mmap() functionality for files by default
. also causes exec() to use it to map in executables
without copying and with sharing those pages with the
disk cache and other instances of the executable
Change-Id: Idb94dfe110eed916cf83b12c45e1a77241a2cee5
As they can come anytime upon receipt of interrupt by the ethernet driver. This
is the same thing as is done for CONF replies.
A simple test case would be the following via ssh connection:
while getaddr; do :; done
Change-Id: I68f4403360b3eefe67fc602c4855ca1abd649475
According to the virtio specifications, the host present the supported
features to the guest, and the guest should answer woth the features it
supports. This allows the host to disable support for features that the
guest is not going to use.
Minix tells to the host it doesn't support any extended features, while
it uses at least VIRTIO_NET_F_MAC and VIRTIO_NET_F_CTRL_VQ. For the
latter it seems it only allocate the queue while not using it later.
However starting with QEMU 1.4.0, with multiqueue support added, the
control queue is not allocated on the host side if the guest doesn't
tell it supports this feature. This cause virtio-net to crash on the
Minix side.
This patch fixes that by correctly telling the features that are
used by the Minix guest for more than printing a debug message. This
fixes virtio-net on QEMU 1.4.x.
Change-Id: I8bbf757c09d24e0f5fe5835531a1c9203b714bd7
* port libgpio to am335x.
* increase NR_IRQ to 16 to avoid too many IRQs requested error.
* move gpio binary to /sbin (that's where mount looks for drivers).
* fix bug that re-enabled banks that were disabled due to bad revision.
* fix padconf masks for dm37xx in gpio driver (should be 16-bit).
* fix a few typos in README.txt and comments.
Change-Id: I32374415a97135174c5224f76374a870909fa90c
