db63c22446
Squashed commit of the following:
commit 8fcdd34f87fe9daaac235315d3b6e1d4986ea0ed
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Nov 5 14:26:57 2013 +0100
Fix for ramdisk generation (?)
Change-Id: If7fd55d9a146d7d7b621da274ac0472a5b246c36
commit 5ffd24ad49bff556adceb050c7cbfddd774ed200
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Nov 5 13:16:56 2013 +0100
Rebase fixes
Too lazy to merge this into the appropriate patch.
Change-Id: I66505d6a0d65330656e78ec9615a026f892b8609
commit 0240220770e6cc18fe16bd0c82e6e5e2c88a4301
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Oct 6 15:58:54 2013 +0200
VFS: further cleanup of device code
- all TTY-related exceptions have now been merged into the regular
code paths, allowing non-TTY drivers to expose TTY-like devices;
- as part of this, CTTY_MAJOR is now fully managed by VFS instead of
being an ugly stepchild of the TTY driver;
- device styles have become completely obsolete, support for them has
been removed throughout the system; same for device flags, which had
already become useless a while ago;
- device map open/close and I/O function pointers have lost their use,
thus finally making the VFS device code actually readable;
- the device-unrelated pm_setsid has been moved to misc.c;
- some other small cleanup-related changes.
Change-Id: If90b10d1818e98a12139da3e94a15d250c9933da
commit 07d10dc91955475340005fa86adf71aa981712c8
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 14:59:59 2013 +0200
IS: dump number of in-use FDs for VFS
Change-Id: If0e2092d5a8c384c31b1f44cc0591bb119c6d8de
commit ced39723e3e7c39a4a2ef516834702a36a6a26c8
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 01:40:58 2013 +0200
TTY: fix earlier PTY select "improvement"
It was just plain wrong.
Change-Id: Ieab4b4f01d9461e05e0d0ba6427a99d863d6b98d
commit a4a63c15cc5f9daf2e149b84ec930834fe24a983
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 16:31:35 2013 +0200
Extend dupfrom(2) into copyfd(2)
This single function allows copying file descriptors from and to
processes, and closing a previously copied remote file descriptor.
This function replaces the five FD-related UDS backcalls. While it
limits the total number of in-flight file descriptors to OPEN_MAX,
this change greatly improves crash recovery support of UDS, since all
in-flight file descriptors will be closed instead of keeping them
open indefinitely (causing VFS to crash on system shutdown). With the
new copyfd call, UDS becomes simpler, and the concept of filps is no
longer exposed outside of VFS.
This patch also moves the checkperms(2) stub into libminlib, thus
fully abstracting away message details of VFS communication from UDS.
Change-Id: Idd32ad390a566143c8ef66955e5ae2c221cff966
commit 663e0abb01990da768f1701df6366a4d3bbd67c1
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 12:50:44 2013 +0200
VFS: better dupfrom(2) deadlock detection
Change-Id: I29f00075698888c7c8ca60b47ab82fba8c606f4e
commit 54c509663718cc109b0f11ab0adc196bfa82015b
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 21:10:01 2013 +0200
UDS: sendmsg/recvmsg fixes
- sendmsg: the accumulation of multiple in-flight file descriptors was
already described in the comments; now the code actually does what
the comments say :) -- also, added robustness in case of a failure;
- recvmsg: only create a socket rights message if there are file
descriptors pending at all;
- recvmsg: copy back the control message length;
- recvmsg: use CMSG_SPACE instead of CMSG_LEN to compute sizes.
Not sure if all of this is now working according to specification,
but at least tmux seems to be happy with it.
Change-Id: I8d076c14c3ff3220b7fea730e0f08f4b4254ede5
commit b0a891c329d721eb84e06ecac803789fe8197306
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 18:41:21 2013 +0200
UDS: add support for FIONREAD
Change-Id: I50030012b408242a86f8c55017429acdadff49d1
commit e81d59c874d57d0d0010d3b1ace2351d01f66766
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 18:00:42 2013 +0200
UDS: align struct sockaddr_un with NetBSD
Well, make a start, anyway. Our copy was missing a legacy field from
the structure, that could very well cause applications to fail trying
to set, clear, or check it. As a consequence, SUN_LEN now yields the
same result as on NetBSD.
Change-Id: I80f6aff7769be402b3bd3959f64d314509ed138c
commit 66f8ad9ac7f0e008cdf416877eeab63ed599477d
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 17:57:42 2013 +0200
UDS: support for nonblocking sockets
This patch includes several other fixes, which are now tested in the
test56 test set.
Change-Id: I9535d5a6c072abf966252838522c5f65b353c6c2
commit 9b4a7ba7ced0b40bf650451ec7baf2935b2ccfe7
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 16:46:18 2013 +0200
UDS: clean up source code
- move VFS calls to a separate source file;
- solve a few subtle bugs, mostly in error handling;
- simplify debug reporting code;
- make a few definitions more independent;
- restyle to something closer to KNF.
Change-Id: I7b0537adfccac8b92b5cc3e78dac9f5ce3c79f03
commit 881641da1fa711d2d4bf8687cb5beb843801daf8
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Oct 4 16:29:40 2013 +0200
UDS: split off from PFS
Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263
commit 2baef79e569c4cebda1a3f831b8e329295e449e6
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Oct 2 19:37:00 2013 +0200
at_wini: PCI-only now; one controller per instance
- remove non-PCI support, since all supported platforms with at_wini
devices also have PCI support by now;
- correspondingly, stop using information from the BIOS altogether;
- limit each driver instance to one controller, to be in line with
the general MINIX3 one-instance-per-controller driver model; this
limits the number of disks per at_wini instance to four;
- go through the controllers by the order of their occurrence in the
PCI table, thus removing the exception for compatibility devices;
- let the second at_wini instance shut down silently if there is only
one IDE controller;
- clean up some extra code we don't need anymore, and resolve some
WARNS=5 level warnings.
Overall, these changes should simplify automatic loading of the right
disk drivers at boot time in the future.
Change-Id: Ia64d08cfbeb9916abd68c9c2941baeb87d02a806
commit f7aaabe7e0ae93b439b02d3c21c38f11bae7bbcf
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Oct 1 00:42:41 2013 +0200
system.conf: subsystem VID/DID matching support
- change "vid/did" to "vid:did", old form still supported for now;
- allow "vid:did/subvid:subdid" specification in system.conf, in
which case a device will be visible to a driver if the subsystem
VID/DID also match.
Change-Id: I7aef54da1b0bc81e24b5d98f1a28416f38f8b266
commit 178d896a32140285e7e9f00dba7bb4a871752f60
Author: Lionel Sambuc <lionel@minix3.org>
Date: Tue Oct 8 19:00:16 2013 +0200
usr.bin/man: Update
Change-Id: I0c5d2115ba384687032f7b2af50d99dedc323b7a
commit 33e8e00217bbf38300f266dda5a494ad4e51bebd
Author: Lionel Sambuc <lionel@minix3.org>
Date: Tue Oct 8 18:05:29 2013 +0200
external/bsd/mdocml: Update
Change-Id: I17b54e52e8322676d83ed4386f586f8ef3029f72
commit e28c0794f18eae77faf3055dadbe76a963242c4e
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Oct 3 18:26:21 2013 +0200
Adapting build system to call MAKEDEV for /dev
* Remove static proto.dev
* Update releasetools/*image.sh not to use proto.dev, as well as
minor comments cleanup
* Add TOOL_TOPROTO
Change-Id: If7dc16d4ebb3b0c4e859786fad25d4af000c999f
commit d26b8149f47461aac67078b8a63ddae21ecdf4f8
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Oct 3 13:54:24 2013 +0200
MAKEDEV: Add mtree output, and ramdisk set.
Change-Id: I36cb7e9451960189a33a04a5c2e3ddb19c7be75e
commit 8dc3249c2ec209689922abb306b0e3d15e6a0347
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 20:24:25 2013 +0200
3.3.0 sync fixes
Keeping this version at 3.2.1 though, mainly for pkgsrc.
Change-Id: Ic91e326623f6dbad58754152c4a632e4406f1117
commit f61a525630a33734481bfd8f0994ae33fef6c3fb
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Oct 2 13:37:49 2013 +0200
keymaps: improve keypad slash support
Now that the keymaps can distinguish between the regular slash key
and the slash key on the numeric keypad, we can avoid localization
of the latter.
Change-Id: I20ead7d26a9baa82f5a522562524fd75d44efb42
commit 81e1e0e8e10c08459af9b7d24f51eff41225b62d
Author: Mikal Villa <mikal.villa@gmail.com>
Date: Wed Oct 2 12:30:03 2013 +0200
Norwegian keymap
Change-Id: I181234afc8f1a058e92af6c1fe88979463aaff45
commit c9fc72ef1769f677ad6c932e84959f8756b32264
Author: Thomas Cort <tcort@minix3.org>
Date: Fri Sep 6 21:40:42 2013 -0400
Importing usr.bin/uname
Change-Id: I4c316221e288edd839e26a2af4cb59f28bf722c1
commit 320e18fd3269219d4b68ba0df3ff8f8434a24a09
Author: Thomas Cort <tcort@minix3.org>
Date: Fri Sep 6 21:40:31 2013 -0400
uname: normalize release and version
Most systems provide the full version number in the
'release' field and the kernel version in 'version'.
Minix used to split the full version number between
release and version which caused problems for pkgsrc
and other applications. This patch brings Minix's
uname in line with other systems such as NetBSD.
It also brings the getty banner in line with NetBSD.
Old Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3
version->2.1
machine->i686
New Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3.2.1
version->Minix 3.2.1 (GENERIC)
machine->i686
Change-Id: I966633dfdcf2f9485966bb0d0d042afc45bbeb7d
commit 3840323699856b0ab67b3c6c3b79695acc25ffcb
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Sep 19 10:57:10 2013 +0200
Replacing timer_t by netbsd's timer_t
* Renamed struct timer to struct minix_timer
* Renamed timer_t to minix_timer_t
* Ensured all the code uses the minix_timer_t typedef
* Removed ifdef around _BSD_TIMER_T
* Removed include/timers.h and merged it into include/minix/timers.h
* Resolved prototype conflict by renaming kernel's (re)set_timer
to (re)set_kernel_timer.
Change-Id: I56f0f30dfed96e1a0575d92492294cf9a06468a5
commit 23906ce75094c89071c04c6a2a2da780d5d1d9d1
Author: Lionel Sambuc <lionel@minix3.org>
Date: Wed Oct 2 10:56:24 2013 +0200
ARM serial driver: Comment termios_baud_rate.
The B0-B115200 defines are flags, and not the actual speed they
represent.
This fixes an incoherency for B0 handling, and documents why it is
required to call the function again after changing the speed flag.
DFL_BAUD is set to one of the flag, so to translate it to an actual
speed, the function calls itself again, which will always be able to
finish without inducing another recursive call.
Change-Id: I04ebfaefee31a88d05f0b726352d1581a966147b
commit 92db382b054926bc494cf369731e67af91033cc8
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Oct 1 23:25:01 2013 +0200
TTY: skip /dev/log checks if console is serial
It is unclear why /dev/log has its own open/close rules, but those
rules conflict with serial console redirection. This does not solve
the root of the problem, but it puts back in place more or less the
same workaround that was already in place before the TTY overhaul.
Change-Id: Ib53abbc28a76c1f2b0befc8448aeed0173bc96a5
commit f1b6f94f744e82b0a4f0fbe8967a4986e079c7cd
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:45:42 2013 +0200
Corrections to keep VFS ABI-compatible
Change-Id: Id8a53a687577c1b6f83c11c2e5fb0b8ed1cd2a08
commit 1d9f12eec8edb0ed8b9bc3cb05eb342d6e4ffb03
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:35:11 2013 +0200
Remove support for obsolete 3.2.1 ABI
Change-Id: I76b4960bda41f55d9c42f8c99c5beae3424ca851
commit 93267010fcf5a6de5bc4ea511e1edab09c2362aa
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 22:59:44 2013 +0200
Fix various file system warnings
Change-Id: Ied10498c3ae14f9f2fd06914f23239df330fa296
commit 42a4fca69efd41f11d28e5b4a4df45c3a14ea91f
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:22:13 2013 +0200
VFS/FS: replace protocol version with flag field
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
commit 6237d4580b2e7f4ca37222581c44f3898a9f2985
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Apr 19 13:16:51 2013 +0200
usr.bin/stat Update
Change-Id: I029160c73baab1b3465bc5397a36c55886db225b
commit 9e7f974e9fa61e0e1d9cb519a69155eb71826f9d
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Apr 19 09:54:51 2013 +0200
almost aligned ioctl prototype
Change-Id: I7f3eaa99d2a9767f71e8387cea5c7f56dcb28f99
commit b1a9440566584280bd07c6e646bb18d5b8133786
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 14:42:15 2013 +0200
32 to 64 bits fsblkcnt_t and fsfilcnt_t.
Change-Id: I432229143c85cd178262b802a76ac606801ac59a
commit 8dea53df7843cf4a96601e019f941e7d13a878c0
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 11:08:16 2013 +0200
moving prototypes to lib.h
Change-Id: If53d3f5ee761b10e0f3d4346a0c5b39ba7901c65
commit 0d00df150181bcc7ee20726801bbc34ebe978a29
Author: Lionel Sambuc <lionel@minix3.org>
Date: Thu Apr 18 11:07:44 2013 +0200
struct uucred
Change-Id: Ia97cb6c38bb566be30d568a252ae7b76142a21dd
commit 1e355e9d217877943e01c5b8859d66258e54b3e5
Author: Lionel Sambuc <lionel@minix3.org>
Date: Tue Apr 16 11:48:54 2013 +0200
Alignement on netbsd types, part 1
The following types are modified (old -> new):
* _BSD_USECONDS_T_ int -> unsigned int
* __socklen_t __int32_t -> __uint32_t
* blksize_t uint32_t -> int32_t
* rlim_t uint32_t -> uint64_t
On ARM:
* _BSD_CLOCK_T_ int -> unsigned int
On Intel:
* _BSD_CLOCK_T_ int -> unsigned long
bin/cat is also updated in order to fix warnings.
_BSD_TIMER_T_ has still to be aligned.
Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7
commit e7b39757eac1ab7aac5a59d7aa124fc316a6e01f
Author: Lionel Sambuc <lionel@minix3.org>
Date: Fri Aug 23 20:27:27 2013 +0200
Adapt the type used for adjtime_delta
clock_t is currently a signed type, but in NetBSD this is not the
case. As we plan on aligning our types we have to change this as this
prevents negative delta from being correctly used.
Change-Id: I9bccdee2b41626b0262471dc1900de505a1991a7
commit 5a551dbe663b22760632c5232326e4101360b330
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 19:01:19 2013 +0200
Butchered version of "Bumping version.."
Change-Id: Ieb5f31fe037bcf45cc86a906f983a0ab3f636468
commit 6d601ae1d7072a8fb6cd908ff1d24ea4ca9bf1b0
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 18:57:04 2013 +0200
Trimmed version of "VFS: use 64-bit file..."
Change-Id: I1b53ef05e939f6afed97f507d443a1d60ed81a21
commit 7adaa6556051b3800670399ee26d246fa9f32486
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Oct 5 18:37:39 2013 +0200
Trimmed version of "stat.h: remove some big_ types"
Change-Id: I6c17d6e5e9d2ab4c1bbf33e461cec4c37b870266
commit 3da9bd17116b66416e8e10ce148599b8ea723680
Author: Thomas Veerman <thomas@minix3.org>
Date: Thu Mar 7 14:46:21 2013 +0000
Define protocol version of {mode,ino,uid,gid}_t
Change-Id: Ia2027749f2ce55a561d19eb895a5618505e9a2ac
commit 6ca17cd644c3b3e4f318faf7d1242855af473b6f
Author: Thomas Veerman <thomas@minix3.org>
Date: Mon Mar 25 21:09:10 2013 +0000
VFS-FS protocol: add versioning
Change-Id: Ice6fbfd4b535b7435653fa08b27a3378d1cfdbf8
commit a7ff601df7d61c0925241ce10aee3a7e99343b3a
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 28 14:46:21 2013 +0200
Input infrastructure, INPUT server, PCKBD driver
This commit separates the low-level keyboard driver from TTY, putting
it in a separate driver (PCKBD). The commit also separates management
of raw input devices from TTY, and puts it in a separate server
(INPUT). All keyboard and mouse input from hardware is sent by drivers
to the INPUT server, which either sends it to a process that has
opened a raw input device, or otherwise forwards it to TTY for
standard processing.
Design by Dirk Vogt. Prototype by Uli Kastlunger.
Additional changes made to the prototype:
- the event communication is now based on USB HID codes; all input
drivers have to use USB codes to describe events;
- all TTY keymaps have been converted to USB format, with the effect
that a single keymap covers all keys; there is no (static) escaped
keymap anymore;
- further keymap tweaks now allow remapping of literally all keys;
- input device renumbering and protocol rewrite;
- INPUT server rewrite, with added support for cancel and select;
- PCKBD reimplementation, including PC/AT-to-USB translation;
- support for manipulating keyboard LEDs has been added;
- keyboard and mouse multiplexer devices have been added to INPUT,
primarily so that an X server need only open two devices;
- a new "libinputdriver" library abstracts away protocol details from
input drivers, and should be used by all future input drivers;
- both INPUT and PCKBD can be restarted;
- TTY is now scheduled by KERNEL, so that it won't be punished for
running a lot; without this, simply running "yes" on the console
kills the system;
- the KIOCBELL IOCTL has been moved to /dev/console;
- support for the SCANCODES termios setting has been removed;
- obsolete keymap compression has been removed;
- the obsolete Olivetti M24 keymap has been removed.
Change-Id: I3a672fb8c4fd566734e4b46d3994b4b7fc96d578
commit 0a3e629c0d4101a33c8b2e79c2e52d312978d34b
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Sep 27 11:56:29 2013 +0000
TTY: allow selecting on translated minors
Due to the existence of /dev/console and /dev/log, and the new
"console=" setting, it is now possible that a single non-PTY object
(e.g. serial) is accessible through two different minor numbers. This
poses a problem when sending late select replies (CDEV_SEL2_REPLY),
because the object's minor number can not be used to identify the
device. Since selecting on such objects through translated minor
numbers is actually required, we now save the minor number used to
initiate the select query in order to send a late reply.
The solution is suboptimal, as it is not possible to use two different
minors to select on the same object at once. In the future, there
should be at least one select record for each minor that can be used
with each object.
Change-Id: I4d39681d2ffd68b4047daf933d45b7bafe3c885e
commit fe2167a148dd17e15502d98e64057239fa122dd5
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 17:35:15 2013 +0200
Take LOG out of the boot image
Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949
commit 81e138bb5ba168322eb780978ed4a90fc1ab7945
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 15:03:20 2013 +0200
Kernel: make SIGKMESS target process list dynamic
The set of processes to which a SIGKMESS signal is sent whenever new
diagnostics messages are added to the kernel's message buffer, is now
no longer hardcoded. Instead, processes can (un)register themselves
to receive such notifications, by means of sys_diagctl().
Change-Id: I9d6ac006a5d9bbfad2757587a068fc1ec3cc083e
commit 9afa18ec208646a9244048a1d444c474ceb47c73
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 21 00:58:46 2013 +0200
Rename SYSCTL kernel call to DIAGCTL
Change-Id: I1b17373f01808d887dcbeab493838946fbef4ef6
commit f82f1ec4b06240e96ed8e64e4bfdf5b06d688f89
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 20:13:59 2013 +0200
Prevent Jenkins from breaking on old df(1)
Change-Id: Ie8e1758bd9de4d5c95c597302f80d568058fbb68
commit 8a430b673dc97767306ddc9cb1a5367f333b7602
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:09:47 2013 +0200
Add testvnd.sh test script
As part of this, change the "run" script to allow certain scripts to
be run as root only.
Change-Id: I846e41037f9d4f6c7fc0b5ea8250303a7bd72f5d
commit fd57902664f398edd9274c2ab1d87daa0b4f4584
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:06:46 2013 +0200
Import NetBSD vndconfig(8)
The tool has been changed heavily to match our VND driver model.
NetBSD is in the process of renaming it from vnconfig(8) to
vndconfig(8). To keep things in sync, we have to play along.
Change-Id: Ie86df184f03ab00573ea76b43c9caa0412e8321d
commit 6809baec22122124a04d8bf8f4f8b5fc7778cb3d
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 14:02:17 2013 +0200
Add VND driver, providing loopback devices
Change-Id: I40fa695e28c67477a75383e6f1550e451afcab41
commit 4cb7efbfd17b934f914f633c8bebf5bec7934e5d
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:55:15 2013 +0200
VFS: add dupfrom(2) call
This call copies a file descriptor from a remote process into the
calling process. The call is for the VND driver only, and in the
future, ACLs will prevent any other process from using this call.
Change-Id: Ib16fdd1f1a12cb38a70d7e441dad91bc86898f6d
commit 378f893b1e710563e2ef2eee457255a6f3037885
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 11:46:08 2013 +0200
tests: do not skip installed shell tests
When installed, the test scripts lose their ".sh" suffix, causing them
to be skipped by the "run" script. With this patch, the tests are no
longer specified with ".sh" suffix in the run script, and the suffix
is added automatically as necessary.
Change-Id: I0b72312e79992b9818559c6546a0e52cd95184c2
commit ecdd53c03077c3cceb29485aa56021d99485d6a5
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:41:56 2013 +0200
blocktest: prepare to be run as part of tests
- fail SEF initialization if any of the subtests failed, so that the
party invoking the "service up" can tell whether the test succeeded;
- add "nocontig" option, because VM isn't particularly good at
allocating contiguous memory;
- add "silent" option, because it floods the console otherwise;
- allow the device size to be smaller than the maximum transfer size;
- install files to installed test directory.
Change-Id: I45c818f817c11d90c5f94ae26a2fc49e36e6761e
commit 848ef711847b7adcf20dce333435802c4e1018ea
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 18 13:38:36 2013 +0200
Enable devname(3)
There is no support for a device name database yet, so this call is
expected to be fairly slow.
Change-Id: I73aa5f267e2b6921b7d3bbdcc4beac463931132c
commit b84199849ad72030993bcf3f943da1509be15ded
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 15 13:09:00 2013 +0200
libbdev: be less noisy about clean driver restarts
Change-Id: Ie02a459c9b544d361ab00bac431ef99de53b0c5f
commit 4f01352a2a6c82fc11465bc555c25e0344c5b970
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Sep 14 14:43:53 2013 +0200
Straighten ioctl.h
- include all ioctl subheaders, properly listing all letters;
- change FBD's ioctl calls to use 'B' instead of 'F', in
preparation of the VND driver.
Change-Id: Ia718979568cc057f47cf505a89238d5b3b6695d4
commit 0ee3f3aeb3d634133a9cd8c3b81589772235c617
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 15 18:55:42 2013 +0200
VM: readd support for forgetting cached FS blocks
Not all services involved in block I/O go through VM to access the
blocks they need. As a result, the blocks in VM may become stale,
possibly causing corruption when the stale copy is restored by a
service that does go through VM later on. This patch restores support
for forgetting cached blocks that belong to a particular device, and
makes the relevant file systems use this functionality 1) when
requested by VFS through REQ_FLUSH, and 2) upon unmount.
Change-Id: I0758c5ed8fe4b5ba81d432595d2113175776aff8
commit c1652705b625a978ea2af169a21349352bd6575f
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 14:50:18 2013 +0200
filter: use libblockdriver
Change-Id: Ifbca2482e996ddca58036d45f557165e636fb3fa
commit ad99ccdb45b897afa7573f75b1a29c4a19767870
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 20:25:01 2013 +0200
Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.
Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
commit 4f91091ea26022877fd8c29094008d8072cf5e2b
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 16:06:37 2013 +0200
Remove support for reopening character devices
Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.
- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
invalidation; instead, make get_filp* fail all calls on invalidated
FDs except when obtained with the locktype VNODE_OPCL which is used
by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
the situation that a FD is in use if its slot points to a filp; use
FILP_CLOSED as single means of marking a filp as invalidated.
Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
commit 8dfbb8fbe4f37642ac9700cc46ad0588687aa3a4
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 12:19:08 2013 +0200
VFS: rework device code
- block the calling thread on character device close;
- fully separate block and character open/close routines;
- reuse generic open/close code for the cloning case;
- zero all messages to drivers before filling them;
- use appropriate types for major/minor device numbers.
Change-Id: Ia90e6fe5688f212f835c5ee1bfca831cb249cf51
commit 9fabdb8b4edf637b47f1530bea145d68a028c319
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 9 00:04:12 2013 +0200
Make PFS backcalls regular VFS calls
- prefix them with VFS_ as they are going to VFS;
- give these calls normal call numbers;
- give them their own set of message field aliases;
- also make do_mapdriver a regular call.
Change-Id: I2140439f288b06d699a1f65438bd8306509b259e
commit 8fbd5d36fa175e2c31ed4a239be3f785e2995aef
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 12:48:10 2013 +0200
TTY: use libchardriver; clean up
- writing to a PTY master side blocks if there is not already a
blocked reader on the slave side, and select now reflects this;
- internally, TTY now uses a test based on "caller != NONE" rather
than "grant != GRANT_INVALID" to identify whether a call is
currently ongoing;
- "offset" fields have been removed as they equal the corresponding
"cum" fields;
- improved variable typing and function naming here and there;
- various other small fixes.
Change-Id: I6b51452888942e864b4e034e8c8490576184a23e
commit 53df30e2b876c03b26f8f52abeafcf8f601e6fd2
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 01:13:59 2013 +0200
VFS: select(2) fixes
- check each file descriptor's open access mode (filp_mode);
- treat an error returned by a character driver as a select error;
- check all filps in each set before finishing select;
- do not copy back file descriptor sets if an error occurred;
- remove the hardcoded list of supported character major devices,
since all drivers should now be capable of responding properly;
- add tests to test40 and fix its error count aggregation.
Change-Id: I57ef58d3afb82640fc50b59c859ee4b25f02db17
commit f08c75810f26adf75a757b5b65fdfa2589cf701d
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 01:07:28 2013 +0200
Retire EBADIOCTL in favor of ENOTTY
Change-Id: I6bd0e301d21ab7f2336e350e7e6e15d238c2c93d
commit 91b7de8257c92283648c796d882a9095a1f64707
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 4 15:42:36 2013 +0000
libnetsock: use libchardriver
Change-Id: Ia5b780cad0b0c636db9bd866c7223da0d38ef6ea
commit 6a3a64d9669c5b1d6ca9acc12f02cd2f21f22d0f
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 00:50:36 2013 +0200
LWIP: move chardev message parsing into libnetsock
Change-Id: Ie23fd003c9fa35811548f388c8e9b55e8d9de8d7
commit 39aa2794e04ad34aecc6dcf607c0987dad13c1ef
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 9 14:53:28 2013 +0000
INET: use libchardriver
Change-Id: Icf8a1a5769ce0aede1cc28da99b9daf7d328182c
commit 7c0d3f508d8e840a2d30da4d3e3af696b9ad2abc
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 02:00:20 2013 +0200
PFS: use libchardriver; clean up
- simplify and repair UDS request handling state machine;
- simplify interface used between internal modules;
- implement missing support for nonblocking I/O;
- fix select implementation;
- clean up global variables.
Change-Id: Ia82c5c6f05cc3f0a498efc9a26de14b1cde6eace
commit 5598aedb79b34fd02b3b81427d683014a3303e0c
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:59:20 2013 +0200
libaudiodriver: use libchardriver
Change-Id: I299d58d110ad14b69076276ba46c4325875c34ca
commit 2aadc0aa253427d18c1e3db597c33dd06d9c380e
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:57:41 2013 +0200
printer: use libchardriver
Change-Id: Ifa3cabeada74c32df2613b8279c00f86e831c775
commit aeaa28b7c68aced329d9cf5b4a01af07b2f3638e
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 3 01:49:38 2013 +0200
libchardriver: full API rewrite
The new API now covers the entire character driver protocol, while
hiding all the message details. It should therefore be used by all
new character drivers. All existing drivers that already made use of
libchardriver have been changed to use the new API.
As one of the most important API changes, support for scatter and
gather transfers has been removed, as several key drivers already
did not support this, and it could be supported at the safecopy
level instead (for a future readv/writev).
Additional changes include:
- respond to block device open requests to avoid hanging VFS threads;
- add support for sef_cancel.
Change-Id: I1bab6c1cb66916c71b87aeb1db54a9bdf171fe6b
commit 6fbd39f8a65178d8fafa260dc42fde5341eb9097
Author: David van Moolenbroek <david@minix3.org>
Date: Thu Aug 1 18:20:33 2013 +0200
blocktest: add support for no alignment
Some block drivers do not impose any alignment requirements, and this
patch allows such block drivers to pass the test set. As a side effect,
minimal support for min_write is added, but this part of blocktest is
in need of further improvement.
commit d70dc11950991506fa08d144067de3fe86b17136
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Apr 18 00:04:28 2012 +0200
libutil: let opendisk(3) try /dev
If a device node is given without path, and opening the node fails
initially, prepend "/dev/" to the node name and try opening again.
This is more in line with NetBSD behavior.
commit 4b6bf57bc77973874b041239c5a7809448e4d857
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 23:57:32 2013 +0200
Block drivers: make IOCTL request unsigned long
The block driver protocol and libblockdriver's bdr_ioctl hook are
changed, as well as the users of this hook. Other parts of the system
are expected to change accordingly eventually, since the ioctl(2)
prototype has been aligned with NetBSD's.
Change-Id: Ide46245b22cfa89ed267a38088fb0ab7696eba92
commit d74ea98bdfd90605dd5b0c57e12390dc4dba56e6
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Jul 27 00:49:49 2013 +0200
Block protocol: add user endpoint to IOCTL request
I/O control requests now come with the endpoint of the user process
that initiated the ioctl(2) call. It is stored in a new BDEV_USER
field, which is an alias for BDEV_FLAGS. The contents of this field
are to be used only in highly specific situations. It should be
preserved (not replaced!) by services that forward IOCTL requests,
and may be set to NONE for service-initiated IOCTL requests.
Change-Id: I68a01b9ce43eca00e61b985a9cf87f55ba683de4
commit 15afe7ddf85235f00e5a5d0e825d2894ac58549d
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Jul 27 00:49:49 2013 +0200
Block protocol: use own [RW]_BIT definitions
The original R_BIT and W_BIT definitions have nothing to do with the
way these bits are used. Their distinct usage is more apparent when
they have different names.
Change-Id: Ia984457f900078b2e3502ceed565fead4e5bb965
commit c4c9435b0df31b36c11f27370475694043c5b8e0
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Sep 10 23:35:15 2013 +0200
libblockdriver: expose BLOCKDRIVER_MAX_DEVICES
This constant determines the range of valid device_id_t values that
a block driver can return from the bdr_device hook: a value between
0 and (BLOCKDRIVER_MAX_DEVICES - 1) inclusive.
Change-Id: I80fac469e88ac13d4b869007e6f2c2f7569da433
commit 2c5bd1565b5d9b487899dee7a023a641343e65a9
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Sep 11 13:33:00 2013 +0200
libblockdriver: various updates
- internal structure rearrangement;
- respond to char device open requests to avoid hanging VFS threads;
- make drivers use designated initializers;
- use devminor_t for all minor device numbers;
- change bdr_other hook to take ipc_status and return nothing;
- fix default geometry computation;
- add support for sef_cancel.
Change-Id: Ia063a136a3ddb2b78de36180feda870605753d70
commit b1cfc3123b03d5a8c9452ae251892593dc328357
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Sep 1 14:34:17 2013 +0200
Block drivers: reply ENOTTY to unknown IOCTLs
Change-Id: Ie2e82d2491d546f4dd73b009100646e249a147b5
commit b5eab0554511ace3d7fae40883be0da139b0e2ab
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Jul 28 14:03:07 2013 +0200
Move SUB_PER_DRIVE definition into minix/drvlib.h
commit 20c8aedc6737fc935ccea0b394616851ff4fdece
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 2 17:34:44 2013 +0200
VFS: update filp_pos on chardev I/O (workaround)
Previously, reading from or writing to a character device would not
update the file position on the corresponding filp object. Performing
this update correctly is not trivial: during and after the I/O
operation, the filp object must not be locked. Ideally, read/write
requests on a filp that is already involved in a read/write operation,
should be queued. For now, we optimistically update the file position
at the start of the I/O; this works under the assumptions listed in
the corresponding comment.
Change-Id: I172a61781850423709924390ae3df1f2d1f94707
commit dbef7bae2308a2e4449b8f274898ed3b60b2add2
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Sep 2 13:45:02 2013 +0200
I2C: change BUSC_I2C_xxx to use own protocol
Previously it would use bits of the character driver protocol, which
will change heavily. In the new situation, the BUSC_I2C_xxx requests
use a protocol more in line with the PCI protocol, with the reply code
in m_type.
Change-Id: I51597b3f191078c8178ce17372de123031f7a4c4
commit 7cdb9683ec718247b03cbae3c827d9834c484e91
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 16:13:37 2013 +0200
tests: add test77 for opening/closing PTYs
Change-Id: I30e3418f75137aa08037fa6581ff3d4cce32a114
commit ed9ee8b9cd5a647130a81bd70af48cee4f6dca15
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 31 16:08:25 2013 +0200
TTY: fix for PTY open/close logic
Opening and closing the master side of a pseudo terminal without
opening the slave side would result in the pseudo terminal becoming
permanently unavailable. In addition, reopening the slave side
would be possible but not allow for I/O. Finally, attempting to
open an in-use master would wipe its I/O state. These issues have
been resolved.
Change-Id: I9235e3d9aba321803f9280b86b6b5e3646ad5ef3
commit cd14d52a99df7fb6dd7c6c48a034e4bf7c170789
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 18:48:56 2013 +0200
tests: remove select subdirectory
This test set has been obsoleted by test40.
Change-Id: I55439152824906778ad07d409dfb327ac10bea70
commit 5ab6f6e7c2f4618648f163af6bd705e5ef2fafb8
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 18:43:23 2013 +0200
tests: add test76 for interrupting VFS operations
Change-Id: Ic436cac61de8c42e0c7ee2d442c647528654cde9
commit ad548d2c9f78e2f2dc2108c50b6c7ed6755a53f1
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Aug 28 13:08:16 2013 +0200
VFS: fix interruption of blocking pipe operations
POSIX states that when interrupted, partially successful pipe
operations should return the partial result rather than EINTR. VFS
previously wouldn't look at the partial result, and not clear it
either, which would result in a panic upon the next pipe operation.
Change-Id: Ia1eb72b4b77394051444e63a1390d49bb315eb04
commit 813198ce7b0ce171f79529e8f6c5a94ab26ce1cb
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 00:57:16 2013 +0200
libmthread: do not dump stack for free threads
Change-Id: Ic438a252f5bddaf1513f554c71173e6fffb0c674
commit 53b6001312428a1ac7379718616cb640614f53e6
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 14:00:50 2013 +0200
VFS: worker thread model overhaul
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:
- all active worker threads are now always associated with a process,
and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
worker_start() function; the number of worker threads has
consequently been increased by one;
- saving and restoring of global but per-thread variables is now
centralized in worker_suspend() and worker_resume(); err_code is now
saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
than just an optimization and only applied to processes operating on
a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
the main thread or a worker thread, when resuming execution of a
thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
force a thread to run.
Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
commit 6fbb7f4167510fb1a71fdad2b965dc2f7417aef4
Author: David van Moolenbroek <david@minix3.org>
Date: Wed Aug 28 15:58:30 2013 +0200
Retire ptrace(T_DUMPCORE), dumpcore(1), gcore(1)
The T_DUMPCORE implementation was not only broken - it would currently
produce a coredump of the tracer process rather than the traced
process - but also deeply flawed, and fixing it would require serious
alteration of PM's internal state machine. It should be possible to
implement the same functionality in userland, and that is now the
suggested way forward. For now, also remove the (identical) utilities
using T_DUMPCORE: dumpcore(1) and gcore(1).
Change-Id: I1d51be19c739362b8a5833de949b76382a1edbcc
commit fde44a0523a26b5bad5a0e3fc2921b1b5821d5d4
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:42:51 2013 +0200
VFS: process char driver replies from main thread
Previously, processing of some replies coming from character drivers
could block on locks, and therefore, such processing was done from
threads that were associated to the character driver process. The
hidden consequence of this was that if all threads were in use, VFS
could drop replies coming from the driver. This patch returns VFS to
a situation where the replies from character drivers are processed
instantly from the main thread, by removing the situations that may
cause VFS to block while handling those replies.
- change the locking model for select, so that it will never block
on any processing that happens after the select call has been set
up, in particular processing of character driver select replies;
- clearly mark all select routines that may never block;
- protect against race conditions in do_select as result of the
locking that still does happen there (as is required for pipes);
- also handle select timers from the main thread;
- move processing of character driver replies into device.c.
Change-Id: I4dc8e69f265cbd178de0fbf321d35f58f067cc57
commit d5d67d293d4a7a2669eb179621a1c6d3e2796d97
Author: David van Moolenbroek <david@minix3.org>
Date: Sun Aug 25 00:26:38 2013 +0200
VFS: properly cancel select queries on unpause
Change-Id: I16e71db3f5c1bcc7ba6045bc9f02b13d71dc31eb
commit d0371a4fbdaddbf7bc543a8046bb91454e09283d
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:33:56 2013 +0200
VFS: remove support for sync char driver protocol
Change-Id: I57cc870a053b813b3a3fc45da46606ea84fe4cb1
commit 2b12ad511fabd5a1019f736221f2940bfe7e2781
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 13:00:44 2013 +0200
VFS: remove FP_BLOCKED_ON_DOPEN
These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
commit 0eee377a337f5800760d2f5611d203c158ac6099
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 12:18:27 2013 +0200
PFS: remember request information for IOCTLs
Not doing so caused PFS to commit protocol violations by relying on
stale information when sending replies. This stale information always
happened to be correct, which is why the problem went unnoticed.
Change-Id: Ia42ca670718d6e731193cd2c34a3ff455f8a94d3
commit 3272c645aca015b6778a8fe945e014a0a5acc023
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 11:14:03 2013 +0200
Retire the synchronous character driver protocol
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
commit 831d825d5a6891b79e97002e1a2d396dcb47bea6
Author: David van Moolenbroek <david@minix3.org>
Date: Fri Aug 30 10:48:34 2013 +0200
Sync char protocol: add nonblocking transfer flag
The async char protocol already has this, so this patch closes the
gap between the two protocols a bit. Support for this flag has been
added to all sync char drivers that support CANCEL at all.
The LOG driver was already using the asynchronous protocol, but it
did not support the nonblocking transfer flag. This has been fixed
as well.
Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f
commit 4f5aec7328128b9d035ff1158f0e6a0f7bd393e4
Author: David van Moolenbroek <david@minix3.org>
Date: Sat Aug 24 12:29:39 2013 +0200
VFS: set w_drv_sendrec only when needed
As with w_task, this ensures that the field remains cleared if it is
not used. Without this, worker_stop could mistakenly identify a thread
as talking to a device driver rather than a (crashed) file server.
Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376
commit 9bbf923154733f1b9ba52a063872ccdbaa7ff0f0
Author: Thomas Veerman <thomas@minix3.org>
Date: Sat Aug 24 12:23:41 2013 +0200
VFS: set w_task only when needed
It was always set, but not always cleared, when talking to asynchronous
drivers. This could cause erratic behavior upon a driver crash.
Normally, a worker thread's w_task field is set when it's about to
communicate with a driver or FS. Then upon receiving a reply we can
do sanity checks (that the thread we want to wake up was actually
waiting for a reply). Also, when a driver/FS crashes, we can identify
which worker threads were talking to the crashed endpoint and handle
the error gracefully.
Asynchronous drivers are a bit special, though. In most cases, the
sender of the request is not interested in the reply (the sender was
suspended and only wants to know whether the request was successfully
caried out or not). However, the open request is special, as the reply
carries information needed by the sender. This is the only request
where a worker thread actually yields and waits for the result. This is
also the only case where we're interested in setting w_task for
asynchronous drivers.
Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379
commit 2a293ca6703354cd7be8eb18147f7c4d18894132
Author: David van Moolenbroek <david@minix3.org>
Date: Mon Aug 19 20:34:15 2013 +0200
Import NetBSD df(1)
Change-Id: Ia60f8b23b961e4132efece1e7e38f0d63597c13b
commit c35fc992ccc052e1f3741be0db9b676682f68bf8
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:33:43 2013 +0200
Enable getmntinfo(3)
Change-Id: Id9d11a67cdcad331a52030127f7c7ead3c847919
commit 907b40860983a73fe22f45aa8b175b27cb7dc1d7
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 00:49:07 2013 +0200
test55: add tests for getvfsstat(2)
Change-Id: Iad4567068a82bb0e780891a478ba5a06b63f1d48
commit 3297eb8d103545690e9f2cb6c63fdd1ce3452c6d
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:28:23 2013 +0200
Implement support for [f]statvfs1(2)
The [f]statvfs(3) calls now use [f]statvfs1(2).
Change-Id: I56c92fe1c70670f476631c4a50e47351562712c6
commit 4f576aff9f046276974c4a769427a1cb8c2470a0
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:39:47 2013 +0200
Implement support for getvfsstat(2)
Change-Id: I4680c071b94fa855edfb6220b03cff6b20f3c1c9
commit 53485a9b35ec2e27ec0df232d8c80db1a829246b
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:37:18 2013 +0200
Redo mount(2)/umount(2) ABI
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: Ia9ed4566d88af5239749c57274312be26bb61448
commit 6ebff29307cd1bacba965d1e8dfb465b6684ccb7
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 01:35:35 2013 +0200
Align "struct statvfs" with NetBSD
This is a requirement for implementing calls such as getmntinfo(3).
VFS is now responsible for filling in some of the structure's fields.
Change-Id: I457b463c70ea2f326b9c50de954a91cfefba0065
commit 9b5871fd21d37b0533b6546c408ff4ad4ae02952
Author: David van Moolenbroek <david@minix3.org>
Date: Tue Aug 20 00:55:49 2013 +0200
VFS/FS: remove fstatfs(2) and REQ_FSTATFS
The fstatfs(3) call now uses fstatvfs(2).
Change-Id: Ic6bbb040e1a8f01aaffe1a6a809dd4c7a2eae2f6
Change-Id: I44109a83fd9155f15a8b580e9471ed1aff952673
943 lines
30 KiB
C
943 lines
30 KiB
C
/* $NetBSD: namespace.h,v 1.156 2012/08/20 21:38:10 dsl Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1997-2004 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _NAMESPACE_H_
|
|
#define _NAMESPACE_H_
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#ifndef __lint__
|
|
#define aio_suspend _aio_suspend
|
|
#define brk _brk
|
|
#define catclose _catclose
|
|
#define catgets _catgets
|
|
#define catopen _catopen
|
|
#define daylight _daylight
|
|
#define difftime _difftime
|
|
#define devname_r _devname_r
|
|
#define err _err
|
|
#define errx _errx
|
|
#ifdef _REENTRANT
|
|
#define fileno _fileno
|
|
#endif /* _REENTRANT */
|
|
#define fork _fork
|
|
#define fseeko _fseeko
|
|
#define ftello _ftello
|
|
#ifndef __minix
|
|
#define getcontext _getcontext
|
|
#endif /* !__minix */
|
|
#define getenv_r _getenv_r
|
|
#define imaxabs _imaxabs
|
|
#define imaxdiv _imaxdiv
|
|
#define inet_aton _inet_aton
|
|
#define inet_pton _inet_pton
|
|
#define pipe _pipe
|
|
#define pipe2 _pipe2
|
|
#define sbrk _sbrk
|
|
#define strerror_r _strerror_r
|
|
#define strlcat _strlcat
|
|
#define strlcpy _strlcpy
|
|
#define strtof _strtof
|
|
#define strtoimax _strtoimax
|
|
#define strtold _strtold
|
|
#define strtoll _strtoll
|
|
#define strtoull _strtoull
|
|
#define strtoumax _strtoumax
|
|
#define sys_errlist _sys_errlist
|
|
#define sys_nerr _sys_nerr
|
|
#define sys_siglist _sys_siglist
|
|
#define sys_nsig _sys_nsig
|
|
#define sysconf __sysconf
|
|
#define verr _verr
|
|
#define verrx _verrx
|
|
#define vwarn _vwarn
|
|
#define vwarnx _vwarnx
|
|
#define warn _warn
|
|
#define warnx _warnx
|
|
|
|
#ifdef __weak_alias
|
|
#define MD2Data _MD2Data
|
|
#define MD2End _MD2End
|
|
#define MD2FileChunk _MD2FileChunk
|
|
#define MD2File _MD2File
|
|
#define MD2Final _MD2Final
|
|
#define MD2Init _MD2Init
|
|
#define MD2Transform _MD2Transform
|
|
#define MD2Update _MD2Update
|
|
#define MD4Data _MD4Data
|
|
#define MD4End _MD4End
|
|
#define MD4FileChunk _MD4FileChunk
|
|
#define MD4File _MD4File
|
|
#define MD4Final _MD4Final
|
|
#define MD4Init _MD4Init
|
|
#define MD4Transform _MD4Transform
|
|
#define MD4Update _MD4Update
|
|
#define MD5Data _MD5Data
|
|
#define MD5End _MD5End
|
|
#define MD5FileChunk _MD5FileChunk
|
|
#define MD5File _MD5File
|
|
#define MD5Final _MD5Final
|
|
#define MD5Init _MD5Init
|
|
#define MD5Transform _MD5Transform
|
|
#define MD5Update _MD5Update
|
|
#define RMD160Data _RMD160Data
|
|
#define RMD160End _RMD160End
|
|
#define RMD160FileChunk _RMD160FileChunk
|
|
#define RMD160File _RMD160File
|
|
#define RMD160Final _RMD160Final
|
|
#define RMD160Init _RMD160Init
|
|
#define RMD160Transform _RMD160Transform
|
|
#define RMD160Update _RMD160Update
|
|
#define SHA1Data _SHA1Data
|
|
#define SHA1End _SHA1End
|
|
#define SHA1FileChunk _SHA1FileChunk
|
|
#define SHA1File _SHA1File
|
|
#define SHA1Final _SHA1Final
|
|
#define SHA1Init _SHA1Init
|
|
#define SHA1Transform _SHA1Transform
|
|
#define SHA1Update _SHA1Update
|
|
#define SHA224_Data _SHA224_Data
|
|
#define SHA224_End _SHA224_End
|
|
#define SHA224_FileChunk _SHA224_FileChunk
|
|
#define SHA224_File _SHA224_File
|
|
#define SHA224_Final _SHA224_Final
|
|
#define SHA224_Init _SHA224_Init
|
|
#define SHA224_Transform _SHA224_Transform
|
|
#define SHA224_Update _SHA224_Update
|
|
#define SHA256_Data _SHA256_Data
|
|
#define SHA256_End _SHA256_End
|
|
#define SHA256_FileChunk _SHA256_FileChunk
|
|
#define SHA256_File _SHA256_File
|
|
#define SHA256_Final _SHA256_Final
|
|
#define SHA256_Init _SHA256_Init
|
|
#define SHA256_Transform _SHA256_Transform
|
|
#define SHA256_Update _SHA256_Update
|
|
#define SHA384_Data _SHA384_Data
|
|
#define SHA384_End _SHA384_End
|
|
#define SHA384_FileChunk _SHA384_FileChunk
|
|
#define SHA384_File _SHA384_File
|
|
#define SHA384_Final _SHA384_Final
|
|
#define SHA384_Init _SHA384_Init
|
|
#define SHA384_Transform _SHA384_Transform
|
|
#define SHA384_Update _SHA384_Update
|
|
#define SHA512_Data _SHA512_Data
|
|
#define SHA512_End _SHA512_End
|
|
#define SHA512_FileChunk _SHA512_FileChunk
|
|
#define SHA512_File _SHA512_File
|
|
#define SHA512_Final _SHA512_Final
|
|
#define SHA512_Init _SHA512_Init
|
|
#define SHA512_Transform _SHA512_Transform
|
|
#define SHA512_Update _SHA512_Update
|
|
#define a64l _a64l
|
|
#define adjtime _adjtime
|
|
#define alarm _alarm
|
|
#define alphasort _alphasort
|
|
#define arc4random _arc4random
|
|
#define arc4random_addrandom _arc4random_addrandom
|
|
#define arc4random_buf _arc4random_buf
|
|
#define arc4random_stir _arc4random_stir
|
|
#define arc4random_uniform _arc4random_uniform
|
|
#define asctime_r _asctime_r
|
|
#define asprintf _asprintf
|
|
#define atoll _atoll
|
|
#define authnone_create _authnone_create
|
|
#define authunix_create _authunix_create
|
|
#define authunix_create_default _authunix_create_default
|
|
#define basename _basename
|
|
#define bindresvport _bindresvport
|
|
#define bindresvport_sa _bindresvport_sa
|
|
#define bm_comp _bm_comp
|
|
#define bm_exec _bm_exec
|
|
#define bm_free _bm_free
|
|
#define callrpc _callrpc
|
|
#define cdbr_close _cdbr_close
|
|
#define cdbr_find _cdbr_find
|
|
#define cdbr_get _cdbr_get
|
|
#define cdbr_open _cdbr_open
|
|
#define cdbw_close _cdbw_close
|
|
#define cdbw_open _cdbw_open
|
|
#define cdbw_put _cdbw_put
|
|
#define cdbw_put_data _cdbw_put_data
|
|
#define cdbw_put_key _cdbw_put_key
|
|
#define cdbw_output _cdbw_output
|
|
#define cfgetispeed _cfgetispeed
|
|
#define cfgetospeed _cfgetospeed
|
|
#define cfmakeraw _cfmakeraw
|
|
#define cfsetispeed _cfsetispeed
|
|
#define cfsetospeed _cfsetospeed
|
|
#define cfsetspeed _cfsetspeed
|
|
#define cgetcap _cgetcap
|
|
#define cgetclose _cgetclose
|
|
#define cgetent _cgetent
|
|
#define cgetfirst _cgetfirst
|
|
#define cgetmatch _cgetmatch
|
|
#define cgetnext _cgetnext
|
|
#define cgetnum _cgetnum
|
|
#define cgetset _cgetset
|
|
#define cgetstr _cgetstr
|
|
#define cgetustr _cgetustr
|
|
#define clnt_broadcast _clnt_broadcast
|
|
#define clnt_create _clnt_create
|
|
#define clnt_create_vers _clnt_create_vers
|
|
#define clnt_dg_create _clnt_dg_create
|
|
#define clnt_pcreateerror _clnt_pcreateerror
|
|
#define clnt_perrno _clnt_perrno
|
|
#define clnt_perror _clnt_perror
|
|
#define clnt_raw_create _clnt_raw_create
|
|
#define clnt_tli_create _clnt_tli_create
|
|
#define clnt_tp_create _clnt_tp_create
|
|
#define clnt_spcreateerror _clnt_spcreateerror
|
|
#define clnt_sperrno _clnt_sperrno
|
|
#define clnt_sperror _clnt_sperror
|
|
#define clnt_vc_create _clnt_vc_create
|
|
#define clntraw_create _clntraw_create
|
|
#define clnttcp_create _clnttcp_create
|
|
#define clntudp_bufcreate _clntudp_bufcreate
|
|
#define clntudp_create _clntudp_create
|
|
#define clock_gettime _clock_gettime
|
|
#define clock_getres _clock_getres
|
|
#define clock_settime _clock_settime
|
|
#define closedir _closedir
|
|
#define closelog _closelog
|
|
#define closelog_r _closelog_r
|
|
#define confstr _confstr
|
|
#define csetexpandtc _csetexpandtc
|
|
#define ctermid _ctermid
|
|
#define ctime_r __ctime_r50
|
|
#define ctime_rz __ctime_rz50
|
|
#define daemon _daemon
|
|
#define dbopen _dbopen
|
|
#define devname _devname
|
|
#define difftime _difftime
|
|
#define dirname _dirname
|
|
#define dn_expand _dn_expand
|
|
#define drand48 _drand48
|
|
#define endfsent _endfsent
|
|
#define endgrent _endgrent
|
|
#define endhostent _endhostent
|
|
#define endnetconfig _endnetconfig
|
|
#define endnetent _endnetent
|
|
#define endnetgrent _endnetgrent
|
|
#define endnetpath _endnetpath
|
|
#define endprotoent _endprotoent
|
|
#define endprotoent_r _endprotoent_r
|
|
#define endpwent _endpwent
|
|
#define endrpcent _endrpcent
|
|
#define endservent _endservent
|
|
#define endservent_r _endservent_r
|
|
#define endttyent _endttyent
|
|
#define endusershell _endusershell
|
|
#define erand48 _erand48
|
|
#define ether_aton _ether_aton
|
|
#define ether_hostton _ether_hostton
|
|
#define ether_line _ether_line
|
|
#define ether_ntoa _ether_ntoa
|
|
#define ether_ntohost _ether_ntohost
|
|
#define execl _execl
|
|
#define execle _execle
|
|
#define execlp _execlp
|
|
#define execv _execv
|
|
#define execvp _execvp
|
|
#define fdopen _fdopen
|
|
#define fgetln _fgetln
|
|
#define fgetwln _fgetwln
|
|
#define fhstatvfs _fhstatvfs
|
|
#define flockfile _flockfile
|
|
#define ftrylockfile _ftrylockfile
|
|
#define funlockfile _funlockfile
|
|
#define fnmatch _fnmatch
|
|
#define fparseln _fparseln
|
|
#define fpgetmask _fpgetmask
|
|
#define fpgetprec _fpgetprec
|
|
#define fpgetround _fpgetround
|
|
#define fpgetsticky _fpgetsticky
|
|
#define fpsetmask _fpsetmask
|
|
#define fpsetprec _fpsetprec
|
|
#define fpsetround _fpsetround
|
|
#define fpsetsticky _fpsetsticky
|
|
#define freenetconfigent _freenetconfigent
|
|
#define freeaddrinfo _freeaddrinfo
|
|
#define freeifaddrs _freeifaddrs
|
|
#define fstatvfs _fstatvfs
|
|
#define fstatvfs1 _fstatvfs1
|
|
#define ftok _ftok
|
|
#define ftruncate _ftruncate
|
|
#define fts_children _fts_children
|
|
#define fts_close _fts_close
|
|
#define fts_open _fts_open
|
|
#define fts_read _fts_read
|
|
#define fts_set _fts_set
|
|
#define gai_strerror _gai_strerror
|
|
#define get_myaddress _get_myaddress
|
|
#define getaddrinfo _getaddrinfo
|
|
#define getbsize _getbsize
|
|
#define getcwd _getcwd
|
|
#define getdelim _getdelim
|
|
#define getdevmajor _getdevmajor
|
|
#define getdiskbyname _getdiskbyname
|
|
#define getdomainname _getdomainname
|
|
#define getfsent _getfsent
|
|
#define getfsfile _getfsfile
|
|
#define getfsspec _getfsspec
|
|
#define getgrent _getgrent
|
|
#define getgrent_r _getgrent_r
|
|
#define getgrgid _getgrgid
|
|
#define getgrgid_r _getgrgid_r
|
|
#define getgrnam _getgrnam
|
|
#define getgrnam_r _getgrnam_r
|
|
#define getgrouplist _getgrouplist
|
|
#define getgroupmembership _getgroupmembership
|
|
#define gethostbyaddr _gethostbyaddr
|
|
#define gethostbyname _gethostbyname
|
|
#define gethostent _gethostent
|
|
#define gethostname _gethostname
|
|
#define getifaddrs _getifaddrs
|
|
#define getline _getline
|
|
#define getloadavg _getloadavg
|
|
#define getlogin _getlogin
|
|
#define getlogin_r _getlogin_r
|
|
#define getmntinfo _getmntinfo
|
|
#define getmode _getmode
|
|
#define getnameinfo _getnameinfo
|
|
#define getnetbyaddr _getnetbyaddr
|
|
#define getnetbyname _getnetbyname
|
|
#define getnetconfig _getnetconfig
|
|
#define getnetconfigent _getnetconfigent
|
|
#define getnetent _getnetent
|
|
#define getnetgrent _getnetgrent
|
|
#define getnetpath _getnetpath
|
|
#define getopt _getopt
|
|
#define getopt_long _getopt_long
|
|
#define getpagesize _getpagesize
|
|
#define getpass _getpass
|
|
#define getpassfd _getpassfd
|
|
#define getpass_r _getpass_r
|
|
#define getprogname _getprogname
|
|
#define getprotobyname _getprotobyname
|
|
#define getprotobyname_r _getprotobyname_r
|
|
#define getprotobynumber _getprotobynumber
|
|
#define getprotobynumber_r _getprotobynumber_r
|
|
#define getprotoent _getprotoent
|
|
#define getprotoent_r _getprotoent_r
|
|
#define getpwent _getpwent
|
|
#define getpwent_r _getpwent_r
|
|
#define getpwnam _getpwnam
|
|
#define getpwnam_r _getpwnam_r
|
|
#define getpwuid _getpwuid
|
|
#define getpwuid_r _getpwuid_r
|
|
#define getrpcbyname _getrpcbyname
|
|
#define getrpcbyname_r _getrpcbyname_r
|
|
#define getrpcbynumber _getrpcbynumber
|
|
#define getrpcbynumber_r _getrpcbynumber_r
|
|
#define getrpcent _getrpcent
|
|
#define getrpcent_r _getrpcent_r
|
|
#define getrpcport _getrpcport
|
|
#define getservbyname _getservbyname
|
|
#define getservbyname_r _getservbyname_r
|
|
#define getservbyport _getservbyport
|
|
#define getservbyport_r _getservbyport_r
|
|
#define getservent _getservent
|
|
#define getservent_r _getservent_r
|
|
#define getsubopt _getsubopt
|
|
#define getttyent _getttyent
|
|
#define getttynam _getttynam
|
|
#define getusershell _getusershell
|
|
#define getvfsstat _getvfsstat
|
|
#define glob _glob
|
|
#define globfree _globfree
|
|
#define gmtime_r _gmtime_r
|
|
#define group_from_gid _group_from_gid
|
|
#define heapsort _heapsort
|
|
#define herror _herror
|
|
#define hes_error _hes_error
|
|
#define hes_free _hes_free
|
|
#define hes_init _hes_init
|
|
#define hes_resolve _hes_resolve
|
|
#define hes_to_bind _hes_to_bind
|
|
#define hesiod_end _hesiod_end
|
|
#define hesiod_free_list _hesiod_free_list
|
|
#define hesiod_init _hesiod_init
|
|
#define hesiod_resolve _hesiod_resolve
|
|
#define hesiod_to_bind _hesiod_to_bind
|
|
#define iconv _iconv
|
|
#define iconv_open _iconv_open
|
|
#define iconv_close _iconv_close
|
|
#define if_freenameindex _if_freenameindex
|
|
#define if_indextoname _if_indextoname
|
|
#define if_nameindex _if_nameindex
|
|
#define if_nametoindex _if_nametoindex
|
|
#define in6addr_any _in6addr_any
|
|
#define in6addr_linklocal_allnodes _in6addr_linklocal_allnodes
|
|
#define in6addr_linklocal_allrouters _in6addr_linklocal_allrouters
|
|
#define in6addr_loopback _in6addr_loopback
|
|
#define in6addr_nodelocal_allnodes _in6addr_nodelocal_allnodes
|
|
#define inet6_option_alloc _inet6_option_alloc
|
|
#define inet6_option_append _inet6_option_append
|
|
#define inet6_option_find _inet6_option_find
|
|
#define inet6_option_init _inet6_option_init
|
|
#define inet6_option_next _inet6_option_next
|
|
#define inet6_option_space _inet6_option_space
|
|
#define inet6_opt_init _inet6_opt_init
|
|
#define inet6_opt_append _inet6_opt_append
|
|
#define inet6_opt_finish _inet6_opt_finish
|
|
#define inet6_opt_set_val _inet6_opt_set_val
|
|
#define inet6_opt_next _inet6_opt_next
|
|
#define inet6_opt_find _inet6_opt_find
|
|
#define inet6_opt_get_val _inet6_opt_get_val
|
|
#define inet6_rthdr_add _inet6_rthdr_add
|
|
#define inet6_rthdr_getaddr _inet6_rthdr_getaddr
|
|
#define inet6_rthdr_getflags _inet6_rthdr_getflags
|
|
#define inet6_rthdr_init _inet6_rthdr_init
|
|
#define inet6_rthdr_lasthop _inet6_rthdr_lasthop
|
|
#define inet6_rthdr_segments _inet6_rthdr_segments
|
|
#define inet6_rthdr_space _inet6_rthdr_space
|
|
#define inet6_rth_space _inet6_rth_space
|
|
#define inet6_rth_init _inet6_rth_init
|
|
#define inet6_rth_add _inet6_rth_add
|
|
#define inet6_rth_reverse _inet6_rth_reverse
|
|
#define inet6_rth_segments _inet6_rth_segments
|
|
#define inet6_rth_getaddr _inet6_rth_getaddr
|
|
#define inet_cidr_ntop _inet_cidr_ntop
|
|
#define inet_cidr_pton _inet_cidr_pton
|
|
#define inet_lnaof _inet_lnaof
|
|
#define inet_makeaddr _inet_makeaddr
|
|
#define inet_net_ntop _inet_net_ntop
|
|
#define inet_net_pton _inet_net_pton
|
|
#define inet_neta _inet_neta
|
|
#define inet_netof _inet_netof
|
|
#define inet_network _inet_network
|
|
#define inet_nsap_addr _inet_nsap_addr
|
|
#define inet_nsap_ntoa _inet_nsap_ntoa
|
|
#define inet_ntoa _inet_ntoa
|
|
#define inet_ntop _inet_ntop
|
|
#define initgroups _initgroups
|
|
#define initstate _initstate
|
|
#define innetgr _innetgr
|
|
#define isatty _isatty
|
|
#define jrand48 _jrand48
|
|
#define kill _kill
|
|
#define l64a _l64a
|
|
#define l64a_r _l64a_r
|
|
#define lcong48 _lcong48
|
|
#define llabs _llabs
|
|
#define lldiv _lldiv
|
|
#define localtime_r __localtime_r50
|
|
#define localtime_rz __localtime_rz50
|
|
#define lockf _lockf
|
|
#define lrand48 _lrand48
|
|
#define lseek _lseek
|
|
#define membar_producer _membar_producer
|
|
#define mergesort _mergesort
|
|
#define mi_vector_hash _mi_vector_hash
|
|
#define mkstemp _mkstemp
|
|
#define mktime_z __mktime_z50
|
|
#define mpool_close _mpool_close
|
|
#define mpool_filter _mpool_filter
|
|
#define mpool_get _mpool_get
|
|
#define mpool_new _mpool_new
|
|
#define mpool_open _mpool_open
|
|
#define mpool_put _mpool_put
|
|
#define mpool_sync _mpool_sync
|
|
#define mq_timedreceive _mq_timedreceive
|
|
#define mq_timedsend _mq_timedsend
|
|
#define mrand48 _mrand48
|
|
#define murmurhash2 _murmurhash2
|
|
#define nc_perror _nc_perror
|
|
#define nc_sperror _nc_sperror
|
|
#define nanosleep _nanosleep
|
|
#define nice _nice
|
|
#if 0
|
|
#define nlist _nlist
|
|
#endif
|
|
#define nrand48 _nrand48
|
|
#define ntp_adjtime _ntp_adjtime
|
|
#define nsdispatch _nsdispatch
|
|
#define offtime _offtime
|
|
#define opendir _opendir
|
|
#define fdopendir _fdopendir
|
|
#define openlog _openlog
|
|
#define openlog_r _openlog_r
|
|
#define pause _pause
|
|
#define pclose _pclose
|
|
#define pmap_getmaps _pmap_getmaps
|
|
#define pmap_getport _pmap_getport
|
|
#define pmap_rmtcall _pmap_rmtcall
|
|
#define pmap_set _pmap_set
|
|
#define pmap_unset _pmap_unset
|
|
#define pollts _pollts
|
|
#define popen _popen
|
|
#define posix2time __posix2time50
|
|
#define posix2time_z __posix2time_z50
|
|
#define pread _pread
|
|
#define pselect _pselect
|
|
#define psignal _psignal
|
|
#define pthread_atfork _pthread_atfork
|
|
#define ptree_init ptree_init
|
|
#define ptree_insert_node ptree_insert_node
|
|
#define ptree_insert_mask_node ptree_insert_mask_node
|
|
#define ptree_find_filtered_node ptree_find_filtered_node
|
|
#define ptree_remove_node ptree_remove_node
|
|
#define ptree_iterate ptree_iterate
|
|
#define putenv _putenv
|
|
#define pwcache_groupdb _pwcache_groupdb
|
|
#define pwcache_userdb _pwcache_userdb
|
|
#define pwrite _pwrite
|
|
#define qabs _qabs
|
|
#define qdiv _qdiv
|
|
#define radixsort _radixsort
|
|
#define random _random
|
|
#define randomid _randomid
|
|
#define randomid_new _randomid_new
|
|
#define randomid_delete _randomid_delete
|
|
#define read _read
|
|
#define readdir _readdir
|
|
#define readdir_r _readdir_r
|
|
#define readlink _readlink
|
|
#define realpath _realpath
|
|
#define regcomp _regcomp
|
|
#define regerror _regerror
|
|
#define regexec _regexec
|
|
#define regfree _regfree
|
|
#define registerrpc _registerrpc
|
|
#define res_init _res_init
|
|
#define res_mkquery _res_mkquery
|
|
#define res_query _res_query
|
|
#define res_search _res_search
|
|
#define rewinddir _rewinddir
|
|
#define rpc_broadcast _rpc_broadcast
|
|
#define rpc_broadcast_exp _rpc_broadcast_exp
|
|
#define rpc_call _rpc_call
|
|
#define rpc_control _rpc_control
|
|
#define rpc_reg _rpc_reg
|
|
#define rpcb_getmaps _rpcb_getmaps
|
|
#define rpcb_gettime _rpcb_gettime
|
|
#define rpcb_rmtcall _rpcb_rmtcall
|
|
#define rpcb_set _rpcb_set
|
|
#define rpcb_taddr2uaddr _rpcb_taddr2uaddr
|
|
#define rpcb_uaddr2taddr _rpcb_uaddr2taddr
|
|
#define rpcb_unset _rpcb_unset
|
|
#define scandir _scandir
|
|
#define seed48 _seed48
|
|
#define seekdir _seekdir
|
|
#define select _select
|
|
#ifdef __minix
|
|
/* '_send' unfortunately collides with Minix IPC's _send function.
|
|
* This solution is fragile, a proper renaming of Minix IPCs should
|
|
* be done insted. */
|
|
#else /* !__minix */
|
|
#define send _send
|
|
#endif /* !__minix */
|
|
#define setdomainname _setdomainname
|
|
#define setenv _setenv
|
|
#define setfsent _setfsent
|
|
#define setgrent _setgrent
|
|
#define setgroupent _setgroupent
|
|
#define sethostent _sethostent
|
|
#define sethostname _sethostname
|
|
#define setlogin _setlogin
|
|
#define setlogmask _setlogmask
|
|
#define setlogmask_r _setlogmask_r
|
|
#define setmode _setmode
|
|
#define setnetconfig _setnetconfig
|
|
#define setnetent _setnetent
|
|
#define setnetgrent _setnetgrent
|
|
#define setpassent _setpassent
|
|
#define setnetpath _setnetpath
|
|
#define setproctitle _setproctitle
|
|
#define setprotoent _setprotoent
|
|
#define setprotoent_r _setprotoent_r
|
|
#define setpwent _setpwent
|
|
#define setrpcent _setrpcent
|
|
#define setservent _setservent
|
|
#define setservent_r _setservent_r
|
|
#define setstate _setstate
|
|
#define setttyent _setttyent
|
|
#define setttyentpath _setttyentpath
|
|
#define settimeofday _settimeofday
|
|
#define setusershell _setusershell
|
|
#define shm_open _shm_open
|
|
#define shm_unlink _shm_unlink
|
|
#define shquote _shquote
|
|
#define siginterrupt _siginterrupt
|
|
#define signal _signal
|
|
#define sigtimedwait _sigtimedwait
|
|
#define sl_add _sl_add
|
|
#define sl_create _sl_create
|
|
#define sl_delete _sl_delete
|
|
#define sl_find _sl_find
|
|
#define sl_free _sl_free
|
|
#define sl_init _sl_init
|
|
#define sleep _sleep
|
|
#ifndef snprintf
|
|
#define snprintf _snprintf
|
|
#endif
|
|
#define snprintf_ss _snprintf_ss
|
|
#define sradixsort _sradixsort
|
|
#define srand48 _srand48
|
|
#define srandom _srandom
|
|
#define statvfs(a, b) _statvfs(a, b)
|
|
#define statvfs1 _statvfs1
|
|
#define strcasecmp _strcasecmp
|
|
#define strdup _strdup
|
|
#define stresep _stresep
|
|
#define strftime_z _strftime_z
|
|
#define strndup _strndup
|
|
#define strncasecmp _strncasecmp
|
|
#define strptime _strptime
|
|
#define strsep _strsep
|
|
#define strsignal _strsignal
|
|
#define strsuftoll _strsuftoll
|
|
#define strsuftollx _strsuftollx
|
|
#define strtok_r _strtok_r
|
|
#define strnunvisx _strnunvisx
|
|
#define strvisx _strvisx
|
|
#define svc_auth_reg _svc_auth_reg
|
|
#define svc_create _svc_create
|
|
#define svc_dg_create _svc_dg_create
|
|
#define svc_exit _svc_exit
|
|
#define svc_fd_create _svc_fd_create
|
|
#define svc_getreq _svc_getreq
|
|
#define svc_getreqset _svc_getreqset
|
|
#define svc_getreq_common _svc_getreq_common
|
|
#define svc_raw_create _svc_raw_create
|
|
#define svc_register _svc_register
|
|
#define svc_reg _svc_reg
|
|
#define svc_run _svc_run
|
|
#define svc_sendreply _svc_sendreply
|
|
#define svc_tli_create _svc_tli_create
|
|
#define svc_tp_create _svc_tp_create
|
|
#define svc_unregister _svc_unregister
|
|
#define svc_unreg _svc_unreg
|
|
#define svc_vc_create _svc_vc_create
|
|
#define svcerr_auth _svcerr_auth
|
|
#define svcerr_decode _svcerr_decode
|
|
#define svcerr_noproc _svcerr_noproc
|
|
#define svcerr_noprog _svcerr_noprog
|
|
#define svcerr_progvers _svcerr_progvers
|
|
#define svcerr_systemerr _svcerr_systemerr
|
|
#define svcerr_weakauth _svcerr_weakauth
|
|
#define svcfd_create _svcfd_create
|
|
#define svcraw_create _svcraw_create
|
|
#define svctcp_create _svctcp_create
|
|
#define svcudp_bufcreate _svcudp_bufcreate
|
|
#define svcudp_create _svcudp_create
|
|
#define svcudp_enablecache _svcudp_enablecache
|
|
#define sysarch _sys_sysarch
|
|
#define sysctl _sysctl
|
|
#define sysctlbyname _sysctlbyname
|
|
#define sysctlgetmibinfo _sysctlgetmibinfo
|
|
#define sysctlnametomib _sysctlnametomib
|
|
#define syslog _syslog
|
|
#define syslog_r _syslog_r
|
|
#define syslog_ss _syslog_ss
|
|
#define syslogp _syslogp
|
|
#define syslogp_r _syslogp_r
|
|
#define syslogp_ss _syslogp_ss
|
|
#define taddr2uaddr _taddr2uaddr
|
|
#define tcdrain _tcdrain
|
|
#define tcflow _tcflow
|
|
#define tcflush _tcflush
|
|
#define tcgetattr _tcgetattr
|
|
#define tcgetpgrp _tcgetpgrp
|
|
#define tcgetsid _tcgetsid
|
|
#define tcsendbreak _tcsendbreak
|
|
#define tcsetattr _tcsetattr
|
|
#define tcsetpgrp _tcsetpgrp
|
|
#define telldir _telldir
|
|
#define time _time
|
|
#define time2posix _time2posix
|
|
#define timegm _timegm
|
|
#define timelocal _timelocal
|
|
#define timeoff _timeoff
|
|
#define times _times
|
|
#define ttyname _ttyname
|
|
#define ttyname_r _ttyname_r
|
|
#define ttyslot _ttyslot
|
|
#define tzname _tzname
|
|
#define tzset _tzset
|
|
#define tzsetwall _tzsetwall
|
|
#define uaddr2taddr _uaddr2taddr
|
|
#define ualarm _ualarm
|
|
#define uname _uname
|
|
#define unsetenv _unsetenv
|
|
#define user_from_uid _user_from_uid
|
|
#define usleep _usleep
|
|
#define utime _utime
|
|
#define uuid_create_nil _uuid_create_nil
|
|
#define uuid_is_nil _uuid_is_nil
|
|
#define valloc _valloc
|
|
#define vdprintf _vdprintf
|
|
#define vdprintf _vdprintf
|
|
#ifndef vsnprintf
|
|
#define vsnprintf _vsnprintf
|
|
#endif
|
|
#define vsnprintf_ss _vsnprintf_ss
|
|
#define vsyslog _vsyslog
|
|
#define vsyslog_r _vsyslog_r
|
|
#define vsyslog_ss _vsyslog_ss
|
|
#define vsyslogp _vsyslogp
|
|
#define vsyslogp_r _vsyslogp_r
|
|
#define vsyslogp_ss _vsyslogp_ss
|
|
#define wait _wait
|
|
#define wait3 _wait3
|
|
#define wait4 _wait4
|
|
#define waitpid _waitpid
|
|
#define wcscasecmp _wcscasecmp
|
|
#define wcsdup _wcsdup
|
|
#define wcsncasecmp _wcsncasecmp
|
|
#define wcstof _wcstof
|
|
#define wcstod _wcstod
|
|
#define wcstold _wcstold
|
|
#define wcwidth _wcwidth
|
|
#define xdr_accepted_reply _xdr_accepted_reply
|
|
#define xdr_array _xdr_array
|
|
#define xdr_authunix_parms _xdr_authunix_parms
|
|
#define xdr_bool _xdr_bool
|
|
#define xdr_bytes _xdr_bytes
|
|
#define xdr_callhdr _xdr_callhdr
|
|
#define xdr_callmsg _xdr_callmsg
|
|
#define xdr_char _xdr_char
|
|
#define xdr_datum _xdr_datum
|
|
#define xdr_des_block _xdr_des_block
|
|
#define xdr_domainname _xdr_domainname
|
|
#define xdr_double _xdr_double
|
|
#define xdr_enum _xdr_enum
|
|
#define xdr_float _xdr_float
|
|
#define xdr_free _xdr_free
|
|
#define xdr_hyper _xdr_hyper
|
|
#define xdr_int _xdr_int
|
|
#define xdr_int16_t _xdr_int16_t
|
|
#define xdr_int32_t _xdr_int32_t
|
|
#define xdr_int64_t _xdr_int64_t
|
|
#define xdr_long _xdr_long
|
|
#define xdr_longlong_t _xdr_longlong_t
|
|
#define xdr_mapname _xdr_mapname
|
|
#define xdr_netbuf _xdr_netbuf
|
|
#define xdr_netobj _xdr_netobj
|
|
#define xdr_opaque _xdr_opaque
|
|
#define xdr_opaque_auth _xdr_opaque_auth
|
|
#define xdr_peername _xdr_peername
|
|
#define xdr_pmap _xdr_pmap
|
|
#define xdr_pmaplist _xdr_pmaplist
|
|
#define xdr_pointer _xdr_pointer
|
|
#define xdr_reference _xdr_reference
|
|
#define xdr_rejected_reply _xdr_rejected_reply
|
|
#define xdr_replymsg _xdr_replymsg
|
|
#define xdr_rmtcall_args _xdr_rmtcall_args
|
|
#define xdr_rmtcallres _xdr_rmtcallres
|
|
#define xdr_rpcb _xdr_rpcb
|
|
#define xdr_rpcb_entry _xdr_rpcb_entry
|
|
#define xdr_rpcb_entry_list_ptr _xdr_rpcb_entry_list_ptr
|
|
#define xdr_rpcb_rmtcallargs _xdr_rpcb_rmtcallargs
|
|
#define xdr_rpcb_rmtcallres _xdr_rpcb_rmtcallres
|
|
#define xdr_rpcb_stat _xdr_rpcb_stat
|
|
#define xdr_rpcb_stat_byvers _xdr_rpcb_stat_byvers
|
|
#define xdr_rpcblist _xdr_rpcblist
|
|
#define xdr_rpcblist_ptr _xdr_rpcblist_ptr
|
|
#define xdr_rpcbs_addrlist _xdr_rpcbs_addrlist
|
|
#define xdr_rpcbs_addrlist_ptr _xdr_rpcbs_addrlist_ptr
|
|
#define xdr_rpcbs_proc _xdr_rpcbs_proc
|
|
#define xdr_rpcbs_rmtcalllist _xdr_rpcbs_rmtcalllist
|
|
#define xdr_rpcbs_rmtcalllist_ptr _xdr_rpcbs_rmtcalllist_ptr
|
|
#define xdr_rpcbs _xdr_rpcbs
|
|
#define xdr_rpcbs _xdr_rpcbs
|
|
#define xdr_short _xdr_short
|
|
#define xdr_sizeof _xdr_sizeof
|
|
#define xdr_string _xdr_string
|
|
#define xdr_u_char _xdr_u_char
|
|
#define xdr_u_hyper _xdr_u_hyper
|
|
#define xdr_u_int _xdr_u_int
|
|
#define xdr_u_int16_t _xdr_u_int16_t
|
|
#define xdr_u_int32_t _xdr_u_int32_t
|
|
#define xdr_u_int64_t _xdr_u_int64_t
|
|
#define xdr_u_long _xdr_u_long
|
|
#define xdr_u_longlong_t _xdr_u_longlong_t
|
|
#define xdr_u_short _xdr_u_short
|
|
#define xdr_union _xdr_union
|
|
#define xdr_vector _xdr_vector
|
|
#define xdr_void _xdr_void
|
|
#define xdr_wrapstring _xdr_wrapstring
|
|
#define xdr_yp_inaddr _xdr_yp_inaddr
|
|
#define xdr_ypall _xdr_ypall
|
|
#define xdr_ypbind_resp _xdr_ypbind_resp
|
|
#define xdr_ypbind_setdom _xdr_ypbind_setdom
|
|
#define xdr_ypdomain_wrap_string _xdr_ypdomain_wrap_string
|
|
#define xdr_ypmap_parms _xdr_ypmap_parms
|
|
#define xdr_ypmap_wrap_string _xdr_ypmap_wrap_string
|
|
#define xdr_ypmaplist _xdr_ypmaplist
|
|
#define xdr_ypowner_wrap_string _xdr_ypowner_wrap_string
|
|
#define xdr_yppushresp_xfr _xdr_yppushresp_xfr
|
|
#define xdr_ypreq_key _xdr_ypreq_key
|
|
#define xdr_ypreq_nokey _xdr_ypreq_nokey
|
|
#define xdr_ypreq_xfr _xdr_ypreq_xfr
|
|
#define xdr_ypresp_key_val _xdr_ypresp_key_val
|
|
#define xdr_ypresp_maplist _xdr_ypresp_maplist
|
|
#define xdr_ypresp_master _xdr_ypresp_master
|
|
#define xdr_ypresp_order _xdr_ypresp_order
|
|
#define xdr_ypresp_val _xdr_ypresp_val
|
|
#define xdrmem_create _xdrmem_create
|
|
#define xdrrec_create _xdrrec_create
|
|
#define xdrrec_endofrecord _xdrrec_endofrecord
|
|
#define xdrrec_eof _xdrrec_eof
|
|
#define xdrrec_skiprecord _xdrrec_skiprecord
|
|
#define xdrstdio_create _xdrstdio_create
|
|
#define xprt_register _xprt_register
|
|
#define xprt_unregister _xprt_unregister
|
|
#define yp_all _yp_all
|
|
#define yp_bind _yp_bind
|
|
#define yp_first _yp_first
|
|
#define yp_get_default_domain _yp_get_default_domain
|
|
#define yp_maplist _yp_maplist
|
|
#define yp_master _yp_master
|
|
#define yp_match _yp_match
|
|
#define yp_next _yp_next
|
|
#define yp_order _yp_order
|
|
#define yp_unbind _yp_unbind
|
|
#define yperr_string _yperr_string
|
|
#define ypprot_err _ypprot_err
|
|
#define yp_setbindtries _yp_setbindtries
|
|
#define dlopen __dlopen
|
|
#define dlclose __dlclose
|
|
#define dlsym __dlsym
|
|
#define dlerror __dlerror
|
|
#define dladdr __dladdr
|
|
#define fmtcheck __fmtcheck
|
|
|
|
/* RB trees */
|
|
#define rb_tree_init _rb_tree_init
|
|
#define rb_tree_find_node _rb_tree_find_node
|
|
#define rb_tree_find_node_geq _rb_tree_find_node_geq
|
|
#define rb_tree_find_node_leq _rb_tree_find_node_leq
|
|
#define rb_tree_insert_node _rb_tree_insert_node
|
|
#define rb_tree_remove_node _rb_tree_remove_node
|
|
#define rb_tree_iterate _rb_tree_iterate
|
|
#ifdef RBDEBUG
|
|
#define rb_tree_check _rb_tree_check
|
|
#define rb_tree_depths _rb_tree_depths
|
|
#endif
|
|
|
|
/* rpc locks */
|
|
#define authdes_lock __rpc_authdes_lock
|
|
#define authnone_lock __rpc_authnone_lock
|
|
#define authsvc_lock __rpc_authsvc_lock
|
|
#define clnt_fd_lock __rpc_clnt_fd_lock
|
|
#define clntraw_lock __rpc_clntraw_lock
|
|
#define dname_lock __rpc_dname_lock
|
|
#define dupreq_lock __rpc_dupreq_lock
|
|
#define keyserv_lock __rpc_keyserv_lock
|
|
#define libnsl_trace_lock __rpc_libnsl_trace_lock
|
|
#define loopnconf_lock __rpc_loopnconf_lock
|
|
#define ops_lock __rpc_ops_lock
|
|
#define portnum_lock __rpc_portnum_lock
|
|
#define proglst_lock __rpc_proglst_lock
|
|
#define rpcbaddr_cache_lock __rpc_rpcbaddr_cache_lock
|
|
#define rpcsoc_lock __rpc_rpcsoc_lock
|
|
#define svc_fd_lock __rpc_svc_fd_lock
|
|
#define svc_lock __rpc_svc_lock
|
|
#define svcraw_lock __rpc_svcraw_lock
|
|
#define xprtlist_lock __rpc_xprtlist_lock
|
|
|
|
#define __learn_tree ___learn_tree
|
|
|
|
#ifdef __minix
|
|
#define _exit __exit
|
|
#define access _access
|
|
#define bind _bind
|
|
#define chdir _chdir
|
|
#define chmod _chmod
|
|
#define chown _chown
|
|
#define chroot _chroot
|
|
#define close _close
|
|
#define dup _dup
|
|
#define dup2 _dup2
|
|
#define execve _execve
|
|
#define fchdir _fchdir
|
|
#define fchmod _fchmod
|
|
#define fchown _fchown
|
|
#define fcntl _fcntl
|
|
#define flock _flock
|
|
#define fstatfs _fstatfs
|
|
#define fsync _fsync
|
|
#define fpathconf _fpathconf
|
|
#define getegid _getegid
|
|
#define geteuid _geteuid
|
|
#define getgroups _getgroups
|
|
#define getpid _getpid
|
|
#define getpgrp _getpgrp
|
|
#define getppid _getppid
|
|
#define gettimeofday _gettimeofday
|
|
#define getgid _getgid
|
|
#define getuid _getuid
|
|
#define ioctl _ioctl
|
|
#define link _link
|
|
#define mount _mount
|
|
#define mkdir _mkdir
|
|
#define mkfifo _mkfifo
|
|
#define mknod _mknod
|
|
#define open _open
|
|
#define pathconf _pathconf
|
|
#define ptrace _ptrace
|
|
#define readv _readv
|
|
#define rmdir _rmdir
|
|
#define setegid _setegid
|
|
#define seteuid _seteuid
|
|
#define setgid _setgid
|
|
#define setgroups _setgroups
|
|
#define setprogname _setprogname
|
|
#define setsid _setsid
|
|
#define setuid _setuid
|
|
#define shmat _shmat
|
|
#define shmdt _shmdt
|
|
#define shmget _shmget
|
|
#define shutdown _shutdown
|
|
#define sigreturn _sigreturn
|
|
#define socket _socket
|
|
#define socketpair _socketpair
|
|
#define symlink _symlink
|
|
#define sync _sync
|
|
#define stime _stime
|
|
#define umask _umask
|
|
#define umount _umount
|
|
#define unlink _unlink
|
|
#define vm_remap _vm_remap
|
|
#define vm_unmap _vm_unmap
|
|
#define vm_getphys _vm_getphys
|
|
#define vm_getrefcount _vm_getrefcount
|
|
#define truncate _truncate
|
|
#define write _write
|
|
#define writev _writev
|
|
#define minix_mmap _minix_mmap
|
|
#define minix_munmap _minix_munmap
|
|
#define vfork __vfork14
|
|
#endif /* __minix */
|
|
|
|
#endif /* __weak_alias */
|
|
#endif /* !__lint__ */
|
|
|
|
#endif /* _NAMESPACE_H_ */
|