minix/commands/fsck.mfs/fsck.c
David van Moolenbroek db63c22446 work-3.2.1 squash commit
Squashed commit of the following:

commit 8fcdd34f87fe9daaac235315d3b6e1d4986ea0ed
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Nov 5 14:26:57 2013 +0100

    Fix for ramdisk generation (?)

    Change-Id: If7fd55d9a146d7d7b621da274ac0472a5b246c36

commit 5ffd24ad49bff556adceb050c7cbfddd774ed200
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Nov 5 13:16:56 2013 +0100

    Rebase fixes

    Too lazy to merge this into the appropriate patch.

    Change-Id: I66505d6a0d65330656e78ec9615a026f892b8609

commit 0240220770e6cc18fe16bd0c82e6e5e2c88a4301
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Oct 6 15:58:54 2013 +0200

    VFS: further cleanup of device code

    - all TTY-related exceptions have now been merged into the regular
      code paths, allowing non-TTY drivers to expose TTY-like devices;
    - as part of this, CTTY_MAJOR is now fully managed by VFS instead of
      being an ugly stepchild of the TTY driver;
    - device styles have become completely obsolete, support for them has
      been removed throughout the system; same for device flags, which had
      already become useless a while ago;
    - device map open/close and I/O function pointers have lost their use,
      thus finally making the VFS device code actually readable;
    - the device-unrelated pm_setsid has been moved to misc.c;
    - some other small cleanup-related changes.

    Change-Id: If90b10d1818e98a12139da3e94a15d250c9933da

commit 07d10dc91955475340005fa86adf71aa981712c8
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 14:59:59 2013 +0200

    IS: dump number of in-use FDs for VFS

    Change-Id: If0e2092d5a8c384c31b1f44cc0591bb119c6d8de

commit ced39723e3e7c39a4a2ef516834702a36a6a26c8
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 01:40:58 2013 +0200

    TTY: fix earlier PTY select "improvement"

    It was just plain wrong.

    Change-Id: Ieab4b4f01d9461e05e0d0ba6427a99d863d6b98d

commit a4a63c15cc5f9daf2e149b84ec930834fe24a983
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 16:31:35 2013 +0200

    Extend dupfrom(2) into copyfd(2)

    This single function allows copying file descriptors from and to
    processes, and closing a previously copied remote file descriptor.
    This function replaces the five FD-related UDS backcalls. While it
    limits the total number of in-flight file descriptors to OPEN_MAX,
    this change greatly improves crash recovery support of UDS, since all
    in-flight file descriptors will be closed instead of keeping them
    open indefinitely (causing VFS to crash on system shutdown). With the
    new copyfd call, UDS becomes simpler, and the concept of filps is no
    longer exposed outside of VFS.

    This patch also moves the checkperms(2) stub into libminlib, thus
    fully abstracting away message details of VFS communication from UDS.

    Change-Id: Idd32ad390a566143c8ef66955e5ae2c221cff966

commit 663e0abb01990da768f1701df6366a4d3bbd67c1
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 12:50:44 2013 +0200

    VFS: better dupfrom(2) deadlock detection

    Change-Id: I29f00075698888c7c8ca60b47ab82fba8c606f4e

commit 54c509663718cc109b0f11ab0adc196bfa82015b
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 21:10:01 2013 +0200

    UDS: sendmsg/recvmsg fixes

    - sendmsg: the accumulation of multiple in-flight file descriptors was
      already described in the comments; now the code actually does what
      the comments say :) -- also, added robustness in case of a failure;
    - recvmsg: only create a socket rights message if there are file
      descriptors pending at all;
    - recvmsg: copy back the control message length;
    - recvmsg: use CMSG_SPACE instead of CMSG_LEN to compute sizes.

    Not sure if all of this is now working according to specification,
    but at least tmux seems to be happy with it.

    Change-Id: I8d076c14c3ff3220b7fea730e0f08f4b4254ede5

commit b0a891c329d721eb84e06ecac803789fe8197306
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 18:41:21 2013 +0200

    UDS: add support for FIONREAD

    Change-Id: I50030012b408242a86f8c55017429acdadff49d1

commit e81d59c874d57d0d0010d3b1ace2351d01f66766
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 18:00:42 2013 +0200

    UDS: align struct sockaddr_un with NetBSD

    Well, make a start, anyway. Our copy was missing a legacy field from
    the structure, that could very well cause applications to fail trying
    to set, clear, or check it. As a consequence, SUN_LEN now yields the
    same result as on NetBSD.

    Change-Id: I80f6aff7769be402b3bd3959f64d314509ed138c

commit 66f8ad9ac7f0e008cdf416877eeab63ed599477d
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 17:57:42 2013 +0200

    UDS: support for nonblocking sockets

    This patch includes several other fixes, which are now tested in the
    test56 test set.

    Change-Id: I9535d5a6c072abf966252838522c5f65b353c6c2

commit 9b4a7ba7ced0b40bf650451ec7baf2935b2ccfe7
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 16:46:18 2013 +0200

    UDS: clean up source code

    - move VFS calls to a separate source file;
    - solve a few subtle bugs, mostly in error handling;
    - simplify debug reporting code;
    - make a few definitions more independent;
    - restyle to something closer to KNF.

    Change-Id: I7b0537adfccac8b92b5cc3e78dac9f5ce3c79f03

commit 881641da1fa711d2d4bf8687cb5beb843801daf8
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Oct 4 16:29:40 2013 +0200

    UDS: split off from PFS

    Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263

commit 2baef79e569c4cebda1a3f831b8e329295e449e6
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Oct 2 19:37:00 2013 +0200

    at_wini: PCI-only now; one controller per instance

    - remove non-PCI support, since all supported platforms with at_wini
      devices also have PCI support by now;
    - correspondingly, stop using information from the BIOS altogether;
    - limit each driver instance to one controller, to be in line with
      the general MINIX3 one-instance-per-controller driver model; this
      limits the number of disks per at_wini instance to four;
    - go through the controllers by the order of their occurrence in the
      PCI table, thus removing the exception for compatibility devices;
    - let the second at_wini instance shut down silently if there is only
      one IDE controller;
    - clean up some extra code we don't need anymore, and resolve some
      WARNS=5 level warnings.

    Overall, these changes should simplify automatic loading of the right
    disk drivers at boot time in the future.

    Change-Id: Ia64d08cfbeb9916abd68c9c2941baeb87d02a806

commit f7aaabe7e0ae93b439b02d3c21c38f11bae7bbcf
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Oct 1 00:42:41 2013 +0200

    system.conf: subsystem VID/DID matching support

    - change "vid/did" to "vid:did", old form still supported for now;
    - allow "vid:did/subvid:subdid" specification in system.conf, in
      which case a device will be visible to a driver if the subsystem
      VID/DID also match.

    Change-Id: I7aef54da1b0bc81e24b5d98f1a28416f38f8b266

commit 178d896a32140285e7e9f00dba7bb4a871752f60
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Tue Oct 8 19:00:16 2013 +0200

    usr.bin/man: Update

    Change-Id: I0c5d2115ba384687032f7b2af50d99dedc323b7a

commit 33e8e00217bbf38300f266dda5a494ad4e51bebd
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Tue Oct 8 18:05:29 2013 +0200

    external/bsd/mdocml: Update

    Change-Id: I17b54e52e8322676d83ed4386f586f8ef3029f72

commit e28c0794f18eae77faf3055dadbe76a963242c4e
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Oct 3 18:26:21 2013 +0200

    Adapting build system to call MAKEDEV for /dev

     * Remove static proto.dev
     * Update releasetools/*image.sh not to use proto.dev, as well as
       minor comments cleanup
     * Add TOOL_TOPROTO

    Change-Id: If7dc16d4ebb3b0c4e859786fad25d4af000c999f

commit d26b8149f47461aac67078b8a63ddae21ecdf4f8
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Oct 3 13:54:24 2013 +0200

    MAKEDEV: Add mtree output, and ramdisk set.

    Change-Id: I36cb7e9451960189a33a04a5c2e3ddb19c7be75e

commit 8dc3249c2ec209689922abb306b0e3d15e6a0347
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 20:24:25 2013 +0200

    3.3.0 sync fixes

    Keeping this version at 3.2.1 though, mainly for pkgsrc.

    Change-Id: Ic91e326623f6dbad58754152c4a632e4406f1117

commit f61a525630a33734481bfd8f0994ae33fef6c3fb
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Oct 2 13:37:49 2013 +0200

    keymaps: improve keypad slash support

    Now that the keymaps can distinguish between the regular slash key
    and the slash key on the numeric keypad, we can avoid localization
    of the latter.

    Change-Id: I20ead7d26a9baa82f5a522562524fd75d44efb42

commit 81e1e0e8e10c08459af9b7d24f51eff41225b62d
Author: Mikal Villa <mikal.villa@gmail.com>
Date:   Wed Oct 2 12:30:03 2013 +0200

    Norwegian keymap

    Change-Id: I181234afc8f1a058e92af6c1fe88979463aaff45

commit c9fc72ef1769f677ad6c932e84959f8756b32264
Author: Thomas Cort <tcort@minix3.org>
Date:   Fri Sep 6 21:40:42 2013 -0400

    Importing usr.bin/uname

    Change-Id: I4c316221e288edd839e26a2af4cb59f28bf722c1

commit 320e18fd3269219d4b68ba0df3ff8f8434a24a09
Author: Thomas Cort <tcort@minix3.org>
Date:   Fri Sep 6 21:40:31 2013 -0400

    uname: normalize release and version

    Most systems provide the full version number in the
    'release' field and the kernel version in 'version'.
    Minix used to split the full version number between
    release and version which caused problems for pkgsrc
    and other applications. This patch brings Minix's
    uname in line with other systems such as NetBSD.
    It also brings the getty banner in line with NetBSD.

    Old Minix uname:
    	sysname->Minix
    	nodename->10.0.2.15
    	release->3
    	version->2.1
    	machine->i686

    New Minix uname:
    	sysname->Minix
    	nodename->10.0.2.15
    	release->3.2.1
    	version->Minix 3.2.1 (GENERIC)
    	machine->i686

    Change-Id: I966633dfdcf2f9485966bb0d0d042afc45bbeb7d

commit 3840323699856b0ab67b3c6c3b79695acc25ffcb
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Sep 19 10:57:10 2013 +0200

    Replacing timer_t by netbsd's timer_t

     * Renamed struct timer to struct minix_timer
     * Renamed timer_t to minix_timer_t
     * Ensured all the code uses the minix_timer_t typedef
     * Removed ifdef around _BSD_TIMER_T
     * Removed include/timers.h and merged it into include/minix/timers.h
     * Resolved prototype conflict by renaming kernel's (re)set_timer
       to (re)set_kernel_timer.

    Change-Id: I56f0f30dfed96e1a0575d92492294cf9a06468a5

commit 23906ce75094c89071c04c6a2a2da780d5d1d9d1
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Wed Oct 2 10:56:24 2013 +0200

    ARM serial driver: Comment termios_baud_rate.

    The B0-B115200 defines are flags, and not the actual speed they
    represent.

    This fixes an incoherency for B0 handling, and documents why it is
    required to call the function again after changing the speed flag.

    DFL_BAUD is set to one of the flag, so to translate it to an actual
    speed, the function calls itself again, which will always be able to
    finish without inducing another recursive call.

    Change-Id: I04ebfaefee31a88d05f0b726352d1581a966147b

commit 92db382b054926bc494cf369731e67af91033cc8
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Oct 1 23:25:01 2013 +0200

    TTY: skip /dev/log checks if console is serial

    It is unclear why /dev/log has its own open/close rules, but those
    rules conflict with serial console redirection.  This does not solve
    the root of the problem, but it puts back in place more or less the
    same workaround that was already in place before the TTY overhaul.

    Change-Id: Ib53abbc28a76c1f2b0befc8448aeed0173bc96a5

commit f1b6f94f744e82b0a4f0fbe8967a4986e079c7cd
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 19:45:42 2013 +0200

    Corrections to keep VFS ABI-compatible

    Change-Id: Id8a53a687577c1b6f83c11c2e5fb0b8ed1cd2a08

commit 1d9f12eec8edb0ed8b9bc3cb05eb342d6e4ffb03
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 19:35:11 2013 +0200

    Remove support for obsolete 3.2.1 ABI

    Change-Id: I76b4960bda41f55d9c42f8c99c5beae3424ca851

commit 93267010fcf5a6de5bc4ea511e1edab09c2362aa
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Aug 31 22:59:44 2013 +0200

    Fix various file system warnings

    Change-Id: Ied10498c3ae14f9f2fd06914f23239df330fa296

commit 42a4fca69efd41f11d28e5b4a4df45c3a14ea91f
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 19:22:13 2013 +0200

    VFS/FS: replace protocol version with flag field

    The main motivation for this change is that only Loris supports
    multithreading, and Loris supports dynamic thread allocation, so the
    number of supported threads can be implemented as a bit flag (i.e.,
    either 1 or "at least as many as VFS has"). The ABI break obviates the
    need to support file system versioning at this time, and several
    other aspects are better implemented as flags as well. Other changes:

    - replace peek/bpeek test upon mount with FS flag as well;
    - mark libsffs as 64-bit file size capable;
    - remove old (3.2.1) getdents support.

    Change-Id: I313eace9c50ed816656c31cd47d969033d952a03

commit 6237d4580b2e7f4ca37222581c44f3898a9f2985
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Fri Apr 19 13:16:51 2013 +0200

    usr.bin/stat Update

    Change-Id: I029160c73baab1b3465bc5397a36c55886db225b

commit 9e7f974e9fa61e0e1d9cb519a69155eb71826f9d
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Fri Apr 19 09:54:51 2013 +0200

    almost aligned ioctl prototype

    Change-Id: I7f3eaa99d2a9767f71e8387cea5c7f56dcb28f99

commit b1a9440566584280bd07c6e646bb18d5b8133786
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Apr 18 14:42:15 2013 +0200

    32 to 64 bits fsblkcnt_t and fsfilcnt_t.

    Change-Id: I432229143c85cd178262b802a76ac606801ac59a

commit 8dea53df7843cf4a96601e019f941e7d13a878c0
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Apr 18 11:08:16 2013 +0200

    moving prototypes to lib.h

    Change-Id: If53d3f5ee761b10e0f3d4346a0c5b39ba7901c65

commit 0d00df150181bcc7ee20726801bbc34ebe978a29
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Thu Apr 18 11:07:44 2013 +0200

    struct uucred

    Change-Id: Ia97cb6c38bb566be30d568a252ae7b76142a21dd

commit 1e355e9d217877943e01c5b8859d66258e54b3e5
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Tue Apr 16 11:48:54 2013 +0200

    Alignement on netbsd types, part 1

    The following types are modified (old -> new):
     * _BSD_USECONDS_T_ int       -> unsigned int
     * __socklen_t      __int32_t -> __uint32_t
     * blksize_t        uint32_t  -> int32_t
     * rlim_t           uint32_t  -> uint64_t
    On ARM:
     * _BSD_CLOCK_T_    int       -> unsigned int
    On Intel:
     * _BSD_CLOCK_T_    int       -> unsigned long

    bin/cat is also updated in order to fix warnings.

    _BSD_TIMER_T_ has still to be aligned.

    Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7

commit e7b39757eac1ab7aac5a59d7aa124fc316a6e01f
Author: Lionel Sambuc <lionel@minix3.org>
Date:   Fri Aug 23 20:27:27 2013 +0200

    Adapt the type used for adjtime_delta

    clock_t is currently a signed type, but in NetBSD this is not the
    case. As we plan on aligning our types we have to change this as this
    prevents negative delta from being correctly used.

    Change-Id: I9bccdee2b41626b0262471dc1900de505a1991a7

commit 5a551dbe663b22760632c5232326e4101360b330
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 19:01:19 2013 +0200

    Butchered version of "Bumping version.."

    Change-Id: Ieb5f31fe037bcf45cc86a906f983a0ab3f636468

commit 6d601ae1d7072a8fb6cd908ff1d24ea4ca9bf1b0
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 18:57:04 2013 +0200

    Trimmed version of "VFS: use 64-bit file..."

    Change-Id: I1b53ef05e939f6afed97f507d443a1d60ed81a21

commit 7adaa6556051b3800670399ee26d246fa9f32486
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Oct 5 18:37:39 2013 +0200

    Trimmed version of "stat.h: remove some big_ types"

    Change-Id: I6c17d6e5e9d2ab4c1bbf33e461cec4c37b870266

commit 3da9bd17116b66416e8e10ce148599b8ea723680
Author: Thomas Veerman <thomas@minix3.org>
Date:   Thu Mar 7 14:46:21 2013 +0000

    Define protocol version of {mode,ino,uid,gid}_t

    Change-Id: Ia2027749f2ce55a561d19eb895a5618505e9a2ac

commit 6ca17cd644c3b3e4f318faf7d1242855af473b6f
Author: Thomas Veerman <thomas@minix3.org>
Date:   Mon Mar 25 21:09:10 2013 +0000

    VFS-FS protocol: add versioning

    Change-Id: Ice6fbfd4b535b7435653fa08b27a3378d1cfdbf8

commit a7ff601df7d61c0925241ce10aee3a7e99343b3a
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Sep 28 14:46:21 2013 +0200

    Input infrastructure, INPUT server, PCKBD driver

    This commit separates the low-level keyboard driver from TTY, putting
    it in a separate driver (PCKBD). The commit also separates management
    of raw input devices from TTY, and puts it in a separate server
    (INPUT). All keyboard and mouse input from hardware is sent by drivers
    to the INPUT server, which either sends it to a process that has
    opened a raw input device, or otherwise forwards it to TTY for
    standard processing.

    Design by Dirk Vogt. Prototype by Uli Kastlunger.

    Additional changes made to the prototype:

    - the event communication is now based on USB HID codes; all input
      drivers have to use USB codes to describe events;
    - all TTY keymaps have been converted to USB format, with the effect
      that a single keymap covers all keys; there is no (static) escaped
      keymap anymore;
    - further keymap tweaks now allow remapping of literally all keys;
    - input device renumbering and protocol rewrite;
    - INPUT server rewrite, with added support for cancel and select;
    - PCKBD reimplementation, including PC/AT-to-USB translation;
    - support for manipulating keyboard LEDs has been added;
    - keyboard and mouse multiplexer devices have been added to INPUT,
      primarily so that an X server need only open two devices;
    - a new "libinputdriver" library abstracts away protocol details from
      input drivers, and should be used by all future input drivers;
    - both INPUT and PCKBD can be restarted;
    - TTY is now scheduled by KERNEL, so that it won't be punished for
      running a lot; without this, simply running "yes" on the console
      kills the system;
    - the KIOCBELL IOCTL has been moved to /dev/console;
    - support for the SCANCODES termios setting has been removed;
    - obsolete keymap compression has been removed;
    - the obsolete Olivetti M24 keymap has been removed.

    Change-Id: I3a672fb8c4fd566734e4b46d3994b4b7fc96d578

commit 0a3e629c0d4101a33c8b2e79c2e52d312978d34b
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Sep 27 11:56:29 2013 +0000

    TTY: allow selecting on translated minors

    Due to the existence of /dev/console and /dev/log, and the new
    "console=" setting, it is now possible that a single non-PTY object
    (e.g. serial) is accessible through two different minor numbers.  This
    poses a problem when sending late select replies (CDEV_SEL2_REPLY),
    because the object's minor number can not be used to identify the
    device.  Since selecting on such objects through translated minor
    numbers is actually required, we now save the minor number used to
    initiate the select query in order to send a late reply.

    The solution is suboptimal, as it is not possible to use two different
    minors to select on the same object at once.  In the future, there
    should be at least one select record for each minor that can be used
    with each object.

    Change-Id: I4d39681d2ffd68b4047daf933d45b7bafe3c885e

commit fe2167a148dd17e15502d98e64057239fa122dd5
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Sep 21 17:35:15 2013 +0200

    Take LOG out of the boot image

    Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949

commit 81e138bb5ba168322eb780978ed4a90fc1ab7945
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Sep 21 15:03:20 2013 +0200

    Kernel: make SIGKMESS target process list dynamic

    The set of processes to which a SIGKMESS signal is sent whenever new
    diagnostics messages are added to the kernel's message buffer, is now
    no longer hardcoded. Instead, processes can (un)register themselves
    to receive such notifications, by means of sys_diagctl().

    Change-Id: I9d6ac006a5d9bbfad2757587a068fc1ec3cc083e

commit 9afa18ec208646a9244048a1d444c474ceb47c73
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Sep 21 00:58:46 2013 +0200

    Rename SYSCTL kernel call to DIAGCTL

    Change-Id: I1b17373f01808d887dcbeab493838946fbef4ef6

commit f82f1ec4b06240e96ed8e64e4bfdf5b06d688f89
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 20:13:59 2013 +0200

    Prevent Jenkins from breaking on old df(1)

    Change-Id: Ie8e1758bd9de4d5c95c597302f80d568058fbb68

commit 8a430b673dc97767306ddc9cb1a5367f333b7602
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 14:09:47 2013 +0200

    Add testvnd.sh test script

    As part of this, change the "run" script to allow certain scripts to
    be run as root only.

    Change-Id: I846e41037f9d4f6c7fc0b5ea8250303a7bd72f5d

commit fd57902664f398edd9274c2ab1d87daa0b4f4584
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 14:06:46 2013 +0200

    Import NetBSD vndconfig(8)

    The tool has been changed heavily to match our VND driver model.

    NetBSD is in the process of renaming it from vnconfig(8) to
    vndconfig(8). To keep things in sync, we have to play along.

    Change-Id: Ie86df184f03ab00573ea76b43c9caa0412e8321d

commit 6809baec22122124a04d8bf8f4f8b5fc7778cb3d
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 14:02:17 2013 +0200

    Add VND driver, providing loopback devices

    Change-Id: I40fa695e28c67477a75383e6f1550e451afcab41

commit 4cb7efbfd17b934f914f633c8bebf5bec7934e5d
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 13:55:15 2013 +0200

    VFS: add dupfrom(2) call

    This call copies a file descriptor from a remote process into the
    calling process. The call is for the VND driver only, and in the
    future, ACLs will prevent any other process from using this call.

    Change-Id: Ib16fdd1f1a12cb38a70d7e441dad91bc86898f6d

commit 378f893b1e710563e2ef2eee457255a6f3037885
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 11:46:08 2013 +0200

    tests: do not skip installed shell tests

    When installed, the test scripts lose their ".sh" suffix, causing them
    to be skipped by the "run" script. With this patch, the tests are no
    longer specified with ".sh" suffix in the run script, and the suffix
    is added automatically as necessary.

    Change-Id: I0b72312e79992b9818559c6546a0e52cd95184c2

commit ecdd53c03077c3cceb29485aa56021d99485d6a5
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 13:41:56 2013 +0200

    blocktest: prepare to be run as part of tests

    - fail SEF initialization if any of the subtests failed, so that the
      party invoking the "service up" can tell whether the test succeeded;
    - add "nocontig" option, because VM isn't particularly good at
      allocating contiguous memory;
    - add "silent" option, because it floods the console otherwise;
    - allow the device size to be smaller than the maximum transfer size;
    - install files to installed test directory.

    Change-Id: I45c818f817c11d90c5f94ae26a2fc49e36e6761e

commit 848ef711847b7adcf20dce333435802c4e1018ea
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 18 13:38:36 2013 +0200

    Enable devname(3)

    There is no support for a device name database yet, so this call is
    expected to be fairly slow.

    Change-Id: I73aa5f267e2b6921b7d3bbdcc4beac463931132c

commit b84199849ad72030993bcf3f943da1509be15ded
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Sep 15 13:09:00 2013 +0200

    libbdev: be less noisy about clean driver restarts

    Change-Id: Ie02a459c9b544d361ab00bac431ef99de53b0c5f

commit 4f01352a2a6c82fc11465bc555c25e0344c5b970
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Sep 14 14:43:53 2013 +0200

    Straighten ioctl.h

    - include all ioctl subheaders, properly listing all letters;
    - change FBD's ioctl calls to use 'B' instead of 'F', in
      preparation of the VND driver.
    Change-Id: Ia718979568cc057f47cf505a89238d5b3b6695d4

commit 0ee3f3aeb3d634133a9cd8c3b81589772235c617
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Sep 15 18:55:42 2013 +0200

    VM: readd support for forgetting cached FS blocks

    Not all services involved in block I/O go through VM to access the
    blocks they need.  As a result, the blocks in VM may become stale,
    possibly causing corruption when the stale copy is restored by a
    service that does go through VM later on.  This patch restores support
    for forgetting cached blocks that belong to a particular device, and
    makes the relevant file systems use this functionality 1) when
    requested by VFS through REQ_FLUSH, and 2) upon unmount.

    Change-Id: I0758c5ed8fe4b5ba81d432595d2113175776aff8

commit c1652705b625a978ea2af169a21349352bd6575f
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 14:50:18 2013 +0200

    filter: use libblockdriver

    Change-Id: Ifbca2482e996ddca58036d45f557165e636fb3fa

commit ad99ccdb45b897afa7573f75b1a29c4a19767870
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 10 20:25:01 2013 +0200

    Rewrite character driver protocol

    As a side effect, remove the clone style, as the normal device style
    supports device cloning now.

    Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5

commit 4f91091ea26022877fd8c29094008d8072cf5e2b
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 10 16:06:37 2013 +0200

    Remove support for reopening character devices

    Previously, VFS would reopen a character device after a driver crash
    if the associated file descriptor was opened with the O_REOPEN flag.
    This patch removes support for this feature. The code was complex,
    full of uncovered corner cases, and hard to test. Moreover, it did not
    actually hide the crash from user applications: they would get an
    error code to indicate that something went wrong, and have to decide
    based on the nature of the underlying device how to continue.

    - remove support for O_REOPEN, and make playwave(1) reopen its device;
    - remove support for the DEV_REOPEN protocol message;
    - remove all code in VFS related to reopening character devices;
    - no longer change VFS filp reference count and FD bitmap upon filp
      invalidation; instead, make get_filp* fail all calls on invalidated
      FDs except when obtained with the locktype VNODE_OPCL which is used
      by close_fd only;
    - remove the VFS fproc file descriptor bitmap entirely, returning to
      the situation that a FD is in use if its slot points to a filp; use
      FILP_CLOSED as single means of marking a filp as invalidated.

    Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f

commit 8dfbb8fbe4f37642ac9700cc46ad0588687aa3a4
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 10 12:19:08 2013 +0200

    VFS: rework device code

    - block the calling thread on character device close;
    - fully separate block and character open/close routines;
    - reuse generic open/close code for the cloning case;
    - zero all messages to drivers before filling them;
    - use appropriate types for major/minor device numbers.

    Change-Id: Ia90e6fe5688f212f835c5ee1bfca831cb249cf51

commit 9fabdb8b4edf637b47f1530bea145d68a028c319
Author: David van Moolenbroek <david@minix3.org>
Date:   Mon Sep 9 00:04:12 2013 +0200

    Make PFS backcalls regular VFS calls

    - prefix them with VFS_ as they are going to VFS;
    - give these calls normal call numbers;
    - give them their own set of message field aliases;
    - also make do_mapdriver a regular call.

    Change-Id: I2140439f288b06d699a1f65438bd8306509b259e

commit 8fbd5d36fa175e2c31ed4a239be3f785e2995aef
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 12:48:10 2013 +0200

    TTY: use libchardriver; clean up

    - writing to a PTY master side blocks if there is not already a
      blocked reader on the slave side, and select now reflects this;
    - internally, TTY now uses a test based on "caller != NONE" rather
      than "grant != GRANT_INVALID" to identify whether a call is
      currently ongoing;
    - "offset" fields have been removed as they equal the corresponding
      "cum" fields;
    - improved variable typing and function naming here and there;
    - various other small fixes.

    Change-Id: I6b51452888942e864b4e034e8c8490576184a23e

commit 53df30e2b876c03b26f8f52abeafcf8f601e6fd2
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 01:13:59 2013 +0200

    VFS: select(2) fixes

    - check each file descriptor's open access mode (filp_mode);
    - treat an error returned by a character driver as a select error;
    - check all filps in each set before finishing select;
    - do not copy back file descriptor sets if an error occurred;
    - remove the hardcoded list of supported character major devices,
      since all drivers should now be capable of responding properly;
    - add tests to test40 and fix its error count aggregation.

    Change-Id: I57ef58d3afb82640fc50b59c859ee4b25f02db17

commit f08c75810f26adf75a757b5b65fdfa2589cf701d
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 01:07:28 2013 +0200

    Retire EBADIOCTL in favor of ENOTTY

    Change-Id: I6bd0e301d21ab7f2336e350e7e6e15d238c2c93d

commit 91b7de8257c92283648c796d882a9095a1f64707
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 4 15:42:36 2013 +0000

    libnetsock: use libchardriver

    Change-Id: Ia5b780cad0b0c636db9bd866c7223da0d38ef6ea

commit 6a3a64d9669c5b1d6ca9acc12f02cd2f21f22d0f
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 00:50:36 2013 +0200

    LWIP: move chardev message parsing into libnetsock

    Change-Id: Ie23fd003c9fa35811548f388c8e9b55e8d9de8d7

commit 39aa2794e04ad34aecc6dcf607c0987dad13c1ef
Author: David van Moolenbroek <david@minix3.org>
Date:   Mon Sep 9 14:53:28 2013 +0000

    INET: use libchardriver

    Change-Id: Icf8a1a5769ce0aede1cc28da99b9daf7d328182c

commit 7c0d3f508d8e840a2d30da4d3e3af696b9ad2abc
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 3 02:00:20 2013 +0200

    PFS: use libchardriver; clean up

    - simplify and repair UDS request handling state machine;
    - simplify interface used between internal modules;
    - implement missing support for nonblocking I/O;
    - fix select implementation;
    - clean up global variables.

    Change-Id: Ia82c5c6f05cc3f0a498efc9a26de14b1cde6eace

commit 5598aedb79b34fd02b3b81427d683014a3303e0c
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 3 01:59:20 2013 +0200

    libaudiodriver: use libchardriver

    Change-Id: I299d58d110ad14b69076276ba46c4325875c34ca

commit 2aadc0aa253427d18c1e3db597c33dd06d9c380e
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 3 01:57:41 2013 +0200

    printer: use libchardriver

    Change-Id: Ifa3cabeada74c32df2613b8279c00f86e831c775

commit aeaa28b7c68aced329d9cf5b4a01af07b2f3638e
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 3 01:49:38 2013 +0200

    libchardriver: full API rewrite

    The new API now covers the entire character driver protocol, while
    hiding all the message details. It should therefore be used by all
    new character drivers. All existing drivers that already made use of
    libchardriver have been changed to use the new API.

    As one of the most important API changes, support for scatter and
    gather transfers has been removed, as several key drivers already
    did not support this, and it could be supported at the safecopy
    level instead (for a future readv/writev).

    Additional changes include:

    - respond to block device open requests to avoid hanging VFS threads;
    - add support for sef_cancel.

    Change-Id: I1bab6c1cb66916c71b87aeb1db54a9bdf171fe6b

commit 6fbd39f8a65178d8fafa260dc42fde5341eb9097
Author: David van Moolenbroek <david@minix3.org>
Date:   Thu Aug 1 18:20:33 2013 +0200

    blocktest: add support for no alignment

    Some block drivers do not impose any alignment requirements, and this
    patch allows such block drivers to pass the test set. As a side effect,
    minimal support for min_write is added, but this part of blocktest is
    in need of further improvement.

commit d70dc11950991506fa08d144067de3fe86b17136
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Apr 18 00:04:28 2012 +0200

    libutil: let opendisk(3) try /dev

    If a device node is given without path, and opening the node fails
    initially, prepend "/dev/" to the node name and try opening again.
    This is more in line with NetBSD behavior.

commit 4b6bf57bc77973874b041239c5a7809448e4d857
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 10 23:57:32 2013 +0200

    Block drivers: make IOCTL request unsigned long

    The block driver protocol and libblockdriver's bdr_ioctl hook are
    changed, as well as the users of this hook. Other parts of the system
    are expected to change accordingly eventually, since the ioctl(2)
    prototype has been aligned with NetBSD's.

    Change-Id: Ide46245b22cfa89ed267a38088fb0ab7696eba92

commit d74ea98bdfd90605dd5b0c57e12390dc4dba56e6
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Jul 27 00:49:49 2013 +0200

    Block protocol: add user endpoint to IOCTL request

    I/O control requests now come with the endpoint of the user process
    that initiated the ioctl(2) call. It is stored in a new BDEV_USER
    field, which is an alias for BDEV_FLAGS. The contents of this field
    are to be used only in highly specific situations. It should be
    preserved (not replaced!) by services that forward IOCTL requests,
    and may be set to NONE for service-initiated IOCTL requests.

    Change-Id: I68a01b9ce43eca00e61b985a9cf87f55ba683de4

commit 15afe7ddf85235f00e5a5d0e825d2894ac58549d
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Jul 27 00:49:49 2013 +0200

    Block protocol: use own [RW]_BIT definitions

    The original R_BIT and W_BIT definitions have nothing to do with the
    way these bits are used. Their distinct usage is more apparent when
    they have different names.

    Change-Id: Ia984457f900078b2e3502ceed565fead4e5bb965

commit c4c9435b0df31b36c11f27370475694043c5b8e0
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Sep 10 23:35:15 2013 +0200

    libblockdriver: expose BLOCKDRIVER_MAX_DEVICES

    This constant determines the range of valid device_id_t values that
    a block driver can return from the bdr_device hook: a value between
    0 and (BLOCKDRIVER_MAX_DEVICES - 1) inclusive.

    Change-Id: I80fac469e88ac13d4b869007e6f2c2f7569da433

commit 2c5bd1565b5d9b487899dee7a023a641343e65a9
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Sep 11 13:33:00 2013 +0200

    libblockdriver: various updates

    - internal structure rearrangement;
    - respond to char device open requests to avoid hanging VFS threads;
    - make drivers use designated initializers;
    - use devminor_t for all minor device numbers;
    - change bdr_other hook to take ipc_status and return nothing;
    - fix default geometry computation;
    - add support for sef_cancel.

    Change-Id: Ia063a136a3ddb2b78de36180feda870605753d70

commit b1cfc3123b03d5a8c9452ae251892593dc328357
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Sep 1 14:34:17 2013 +0200

    Block drivers: reply ENOTTY to unknown IOCTLs

    Change-Id: Ie2e82d2491d546f4dd73b009100646e249a147b5

commit b5eab0554511ace3d7fae40883be0da139b0e2ab
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Jul 28 14:03:07 2013 +0200

    Move SUB_PER_DRIVE definition into minix/drvlib.h

commit 20c8aedc6737fc935ccea0b394616851ff4fdece
Author: David van Moolenbroek <david@minix3.org>
Date:   Mon Sep 2 17:34:44 2013 +0200

    VFS: update filp_pos on chardev I/O (workaround)

    Previously, reading from or writing to a character device would not
    update the file position on the corresponding filp object.  Performing
    this update correctly is not trivial: during and after the I/O
    operation, the filp object must not be locked.  Ideally, read/write
    requests on a filp that is already involved in a read/write operation,
    should be queued.  For now, we optimistically update the file position
    at the start of the I/O; this works under the assumptions listed in
    the corresponding comment.

    Change-Id: I172a61781850423709924390ae3df1f2d1f94707

commit dbef7bae2308a2e4449b8f274898ed3b60b2add2
Author: David van Moolenbroek <david@minix3.org>
Date:   Mon Sep 2 13:45:02 2013 +0200

    I2C: change BUSC_I2C_xxx to use own protocol

    Previously it would use bits of the character driver protocol, which
    will change heavily.  In the new situation, the BUSC_I2C_xxx requests
    use a protocol more in line with the PCI protocol, with the reply code
    in m_type.

    Change-Id: I51597b3f191078c8178ce17372de123031f7a4c4

commit 7cdb9683ec718247b03cbae3c827d9834c484e91
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Aug 31 16:13:37 2013 +0200

    tests: add test77 for opening/closing PTYs

    Change-Id: I30e3418f75137aa08037fa6581ff3d4cce32a114

commit ed9ee8b9cd5a647130a81bd70af48cee4f6dca15
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Aug 31 16:08:25 2013 +0200

    TTY: fix for PTY open/close logic

    Opening and closing the master side of a pseudo terminal without
    opening the slave side would result in the pseudo terminal becoming
    permanently unavailable.  In addition, reopening the slave side
    would be possible but not allow for I/O.  Finally, attempting to
    open an in-use master would wipe its I/O state.  These issues have
    been resolved.

    Change-Id: I9235e3d9aba321803f9280b86b6b5e3646ad5ef3

commit cd14d52a99df7fb6dd7c6c48a034e4bf7c170789
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 18:48:56 2013 +0200

    tests: remove select subdirectory

    This test set has been obsoleted by test40.

    Change-Id: I55439152824906778ad07d409dfb327ac10bea70

commit 5ab6f6e7c2f4618648f163af6bd705e5ef2fafb8
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 18:43:23 2013 +0200

    tests: add test76 for interrupting VFS operations

    Change-Id: Ic436cac61de8c42e0c7ee2d442c647528654cde9

commit ad548d2c9f78e2f2dc2108c50b6c7ed6755a53f1
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Aug 28 13:08:16 2013 +0200

    VFS: fix interruption of blocking pipe operations

    POSIX states that when interrupted, partially successful pipe
    operations should return the partial result rather than EINTR. VFS
    previously wouldn't look at the partial result, and not clear it
    either, which would result in a panic upon the next pipe operation.

    Change-Id: Ia1eb72b4b77394051444e63a1390d49bb315eb04

commit 813198ce7b0ce171f79529e8f6c5a94ab26ce1cb
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 00:57:16 2013 +0200

    libmthread: do not dump stack for free threads

    Change-Id: Ic438a252f5bddaf1513f554c71173e6fffb0c674

commit 53b6001312428a1ac7379718616cb640614f53e6
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 14:00:50 2013 +0200

    VFS: worker thread model overhaul

    The main purpose of this patch is to fix handling of unpause calls
    from PM while another call is ongoing. The solution to this problem
    sparked a full revision of the threading model, consisting of a large
    number of related changes:

    - all active worker threads are now always associated with a process,
      and every process has at most one active thread working for it;
    - the process lock is always held by a process's worker thread;
    - a process can now have both normal work and postponed PM work
      associated to it;
    - timer expiry and non-postponed PM work is done from the main thread;
    - filp garbage collection is done from a thread associated with VFS;
    - reboot calls from PM are now done from a thread associated with PM;
    - the DS events handler is protected from starting multiple threads;
    - support for a system worker thread has been removed;
    - the deadlock recovery thread has been replaced by a parameter to the
      worker_start() function; the number of worker threads has
      consequently been increased by one;
    - saving and restoring of global but per-thread variables is now
      centralized in worker_suspend() and worker_resume(); err_code is now
      saved and restored in all cases;
    - the concept of jobs has been removed, and job_m_in now points to a
      message stored in the worker thread structure instead;
    - the PM lock has been removed;
    - the separate exec lock has been replaced by a lock on the VM
      process, which was already being locked for exec calls anyway;
    - PM_UNPAUSE is now processed as a postponed PM request, from a thread
      associated with the target process;
    - the FP_DROP_WORK flag has been removed, since it is no longer more
      than just an optimization and only applied to processes operating on
      a pipe when getting killed;
    - assignment to "fp" now takes place only when obtaining new work in
      the main thread or a worker thread, when resuming execution of a
      thread, and in the special case of exiting processes during reboot;
    - there are no longer special cases where the yield() call is used to
      force a thread to run.

    Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858

commit 6fbb7f4167510fb1a71fdad2b965dc2f7417aef4
Author: David van Moolenbroek <david@minix3.org>
Date:   Wed Aug 28 15:58:30 2013 +0200

    Retire ptrace(T_DUMPCORE), dumpcore(1), gcore(1)

    The T_DUMPCORE implementation was not only broken - it would currently
    produce a coredump of the tracer process rather than the traced
    process - but also deeply flawed, and fixing it would require serious
    alteration of PM's internal state machine. It should be possible to
    implement the same functionality in userland, and that is now the
    suggested way forward. For now, also remove the (identical) utilities
    using T_DUMPCORE: dumpcore(1) and gcore(1).

    Change-Id: I1d51be19c739362b8a5833de949b76382a1edbcc

commit fde44a0523a26b5bad5a0e3fc2921b1b5821d5d4
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 13:42:51 2013 +0200

    VFS: process char driver replies from main thread

    Previously, processing of some replies coming from character drivers
    could block on locks, and therefore, such processing was done from
    threads that were associated to the character driver process. The
    hidden consequence of this was that if all threads were in use, VFS
    could drop replies coming from the driver. This patch returns VFS to
    a situation where the replies from character drivers are processed
    instantly from the main thread, by removing the situations that may
    cause VFS to block while handling those replies.

    - change the locking model for select, so that it will never block
      on any processing that happens after the select call has been set
      up, in particular processing of character driver select replies;
    - clearly mark all select routines that may never block;
    - protect against race conditions in do_select as result of the
      locking that still does happen there (as is required for pipes);
    - also handle select timers from the main thread;
    - move processing of character driver replies into device.c.

    Change-Id: I4dc8e69f265cbd178de0fbf321d35f58f067cc57

commit d5d67d293d4a7a2669eb179621a1c6d3e2796d97
Author: David van Moolenbroek <david@minix3.org>
Date:   Sun Aug 25 00:26:38 2013 +0200

    VFS: properly cancel select queries on unpause

    Change-Id: I16e71db3f5c1bcc7ba6045bc9f02b13d71dc31eb

commit d0371a4fbdaddbf7bc543a8046bb91454e09283d
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 13:33:56 2013 +0200

    VFS: remove support for sync char driver protocol

    Change-Id: I57cc870a053b813b3a3fc45da46606ea84fe4cb1

commit 2b12ad511fabd5a1019f736221f2940bfe7e2781
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 13:00:44 2013 +0200

    VFS: remove FP_BLOCKED_ON_DOPEN

    These days, DEV_OPEN calls to character drivers block the calling
    thread until completion or failure, and thus never return SUSPEND to
    the caller. The same already applied to BDEV_OPEN calls to block
    drivers. It has thus become impossible for a process to enter a state
    of being blocked on a device open call.

    There is currently no support for restarting device open calls to
    restarted character drivers. This support was present in the _DOPEN
    logic, but was already no longer triggering. In the future, this case
    should be handled by the thread performing the open request.

    Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00

commit 0eee377a337f5800760d2f5611d203c158ac6099
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 12:18:27 2013 +0200

    PFS: remember request information for IOCTLs

    Not doing so caused PFS to commit protocol violations by relying on
    stale information when sending replies. This stale information always
    happened to be correct, which is why the problem went unnoticed.
    Change-Id: Ia42ca670718d6e731193cd2c34a3ff455f8a94d3

commit 3272c645aca015b6778a8fe945e014a0a5acc023
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 11:14:03 2013 +0200

    Retire the synchronous character driver protocol

    - change all sync char drivers into async drivers;
    - retire support for the sync protocol in libchardev;
    - remove async dev style, as this is now the default;
    - remove dev_status from VFS;
    - clean up now-unused protocol messages.

    Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87

commit 831d825d5a6891b79e97002e1a2d396dcb47bea6
Author: David van Moolenbroek <david@minix3.org>
Date:   Fri Aug 30 10:48:34 2013 +0200

    Sync char protocol: add nonblocking transfer flag

    The async char protocol already has this, so this patch closes the
    gap between the two protocols a bit. Support for this flag has been
    added to all sync char drivers that support CANCEL at all.

    The LOG driver was already using the asynchronous protocol, but it
    did not support the nonblocking transfer flag. This has been fixed
    as well.

    Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f

commit 4f5aec7328128b9d035ff1158f0e6a0f7bd393e4
Author: David van Moolenbroek <david@minix3.org>
Date:   Sat Aug 24 12:29:39 2013 +0200

    VFS: set w_drv_sendrec only when needed

    As with w_task, this ensures that the field remains cleared if it is
    not used. Without this, worker_stop could mistakenly identify a thread
    as talking to a device driver rather than a (crashed) file server.

    Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376

commit 9bbf923154733f1b9ba52a063872ccdbaa7ff0f0
Author: Thomas Veerman <thomas@minix3.org>
Date:   Sat Aug 24 12:23:41 2013 +0200

    VFS: set w_task only when needed

    It was always set, but not always cleared, when talking to asynchronous
    drivers. This could cause erratic behavior upon a driver crash.

    Normally, a worker thread's w_task field is set when it's about to
    communicate with a driver or FS. Then upon receiving a reply we can
    do sanity checks (that the thread we want to wake up was actually
    waiting for a reply). Also, when a driver/FS crashes, we can identify
    which worker threads were talking to the crashed endpoint and handle
    the error gracefully.

    Asynchronous drivers are a bit special, though. In most cases, the
    sender of the request is not interested in the reply (the sender was
    suspended and only wants to know whether the request was successfully
    caried out or not). However, the open request is special, as the reply
    carries information needed by the sender. This is the only request
    where a worker thread actually yields and waits for the result. This is
    also the only case where we're interested in setting w_task for
    asynchronous drivers.

    Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379

commit 2a293ca6703354cd7be8eb18147f7c4d18894132
Author: David van Moolenbroek <david@minix3.org>
Date:   Mon Aug 19 20:34:15 2013 +0200

    Import NetBSD df(1)

    Change-Id: Ia60f8b23b961e4132efece1e7e38f0d63597c13b

commit c35fc992ccc052e1f3741be0db9b676682f68bf8
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 01:33:43 2013 +0200

    Enable getmntinfo(3)

    Change-Id: Id9d11a67cdcad331a52030127f7c7ead3c847919

commit 907b40860983a73fe22f45aa8b175b27cb7dc1d7
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 00:49:07 2013 +0200

    test55: add tests for getvfsstat(2)

    Change-Id: Iad4567068a82bb0e780891a478ba5a06b63f1d48

commit 3297eb8d103545690e9f2cb6c63fdd1ce3452c6d
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 01:28:23 2013 +0200

    Implement support for [f]statvfs1(2)

    The [f]statvfs(3) calls now use [f]statvfs1(2).

    Change-Id: I56c92fe1c70670f476631c4a50e47351562712c6

commit 4f576aff9f046276974c4a769427a1cb8c2470a0
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 01:39:47 2013 +0200

    Implement support for getvfsstat(2)

    Change-Id: I4680c071b94fa855edfb6220b03cff6b20f3c1c9

commit 53485a9b35ec2e27ec0df232d8c80db1a829246b
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 01:37:18 2013 +0200

    Redo mount(2)/umount(2) ABI

    - pass in file system type through mount(2), and return this type in
      statvfs structures as generated by [f]statvfs(2);
    - align mount flags field with NetBSD's, splitting out service flags
      which are not to be passed to VFS;
    - remove limitation of mount ABI to 16-byte labels, so that labels
      can be made larger in the future;
    - introduce new m11 message union type for mount(2) as side effect.

    Change-Id: Ia9ed4566d88af5239749c57274312be26bb61448

commit 6ebff29307cd1bacba965d1e8dfb465b6684ccb7
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 01:35:35 2013 +0200

    Align "struct statvfs" with NetBSD

    This is a requirement for implementing calls such as getmntinfo(3).
    VFS is now responsible for filling in some of the structure's fields.

    Change-Id: I457b463c70ea2f326b9c50de954a91cfefba0065

commit 9b5871fd21d37b0533b6546c408ff4ad4ae02952
Author: David van Moolenbroek <david@minix3.org>
Date:   Tue Aug 20 00:55:49 2013 +0200

    VFS/FS: remove fstatfs(2) and REQ_FSTATFS

    The fstatfs(3) call now uses fstatvfs(2).

    Change-Id: Ic6bbb040e1a8f01aaffe1a6a809dd4c7a2eae2f6

Change-Id: I44109a83fd9155f15a8b580e9471ed1aff952673
2013-11-05 18:25:04 +01:00

1666 lines
43 KiB
C

/* Hacks for version 1.6 */
#define INODES_PER_BLOCK V2_INODES_PER_BLOCK(block_size)
#define INODE_SIZE ((int) V2_INODE_SIZE)
#define WORDS_PER_BLOCK (block_size / (int) sizeof(bitchunk_t))
#define MAX_ZONES (V2_NR_DZONES+V2_INDIRECTS(block_size)+(long)V2_INDIRECTS(block_size)*V2_INDIRECTS(block_size))
#define NR_DZONE_NUM V2_NR_DZONES
#define NR_INDIRECTS V2_INDIRECTS(block_size)
#define NR_ZONE_NUMS V2_NR_TZONES
#define ZONE_NUM_SIZE V2_ZONE_NUM_SIZE
#define bit_nr bit_t
#define block_nr block_t
#define d_inode d2_inode
#define d_inum mfs_d_ino
#define dir_struct struct direct
#define i_mode d2_mode
#define i_nlinks d2_nlinks
#define i_size d2_size
#define i_zone d2_zone
#define zone_nr zone_t
/* fsck - file system checker Author: Robbert van Renesse */
/* Modified by Norbert Schlenker
* Removed vestiges of standalone/DOS versions:
* - various unused variables and buffers removed
* - now uses library functions rather than private internal routines
* - bytewise structure copies replaced by structure assignment
* - fixed one bug with 14 character file names
* - other small tweaks for speed
*
* Modified by Lars Fredriksen at the request of Andy Tanenbaum, 90-03-10.
* Removed -m option, by which fsck could be told to make a file
* system on a 360K floppy. The code had limited utility, was buggy,
* and failed due to a bug in the ACK C compiler. Use mkfs instead!
*/
#include <sys/types.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <limits.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <minix/config.h>
#include <minix/const.h>
#include <minix/type.h>
#include <minix/u64.h>
#include "mfs/const.h"
#include "mfs/inode.h"
#include "mfs/type.h"
#include "mfs/mfsdir.h"
#include <minix/fslib.h>
#include <stdio.h>
#include <sys/stat.h>
#include <dirent.h>
#include "exitvalues.h"
#undef N_DATA
unsigned int fs_version = 2, block_size = 0;
#define BITSHIFT 5 /* = log2(#bits(int)) */
#define MAXPRINT 80 /* max. number of error lines in chkmap */
#define CINDIR 128 /* number of indirect zno's read at a time */
#define CDIRECT 1 /* number of dir entries read at a time */
/* Macros for handling bitmaps. Now bit_t is long, these are bulky and the
* type demotions produce a lot of lint. The explicit demotion in POWEROFBIT
* is for efficiency and assumes 2's complement ints. Lint should be clever
* enough not to warn about it since BITMASK is small, but isn't. (It would
* be easier to get right if bit_t was was unsigned (long) since then there
* would be no danger from wierd sign representations. Lint doesn't know
* we only use non-negative bit numbers.) There will usually be an implicit
* demotion when WORDOFBIT is used as an array index. This should be safe
* since memory for bitmaps will run out first.
*/
#define BITMASK ((1 << BITSHIFT) - 1)
#define WORDOFBIT(b) ((b) >> BITSHIFT)
#define POWEROFBIT(b) (1 << ((int) (b) & BITMASK))
#define setbit(w, b) (w[WORDOFBIT(b)] |= POWEROFBIT(b))
#define clrbit(w, b) (w[WORDOFBIT(b)] &= ~POWEROFBIT(b))
#define bitset(w, b) (w[WORDOFBIT(b)] & POWEROFBIT(b))
#define ZONE_CT 360 /* default zones (when making file system) */
#define INODE_CT 95 /* default inodes (when making file system) */
#include "mfs/super.h"
static struct super_block sb;
#define STICKY_BIT 01000 /* not defined anywhere else */
/* Ztob gives the block address of a zone
* btoa64 gives the byte address of a block
*/
#define ztob(z) ((block_nr) (z) << sb.s_log_zone_size)
#define btoa64(b) (mul64u(b, block_size))
#define SCALE ((int) ztob(1)) /* # blocks in a zone */
#define FIRST ((zone_nr) sb.s_firstdatazone) /* as the name says */
/* # blocks of each type */
#define N_IMAP (sb.s_imap_blocks)
#define N_ZMAP (sb.s_zmap_blocks)
#define N_ILIST ((sb.s_ninodes+INODES_PER_BLOCK-1) / INODES_PER_BLOCK)
#define N_DATA (sb.s_zones - FIRST)
/* Block address of each type */
#define OFFSET_SUPER_BLOCK SUPER_BLOCK_BYTES
#define BLK_IMAP 2
#define BLK_ZMAP (BLK_IMAP + N_IMAP)
#define BLK_ILIST (BLK_ZMAP + N_ZMAP)
#define BLK_FIRST ztob(FIRST)
#define ZONE_SIZE ((int) ztob(block_size))
#define NLEVEL (NR_ZONE_NUMS - NR_DZONE_NUM + 1)
/* Byte address of a zone */
#define INDCHUNK ((int) (CINDIR * ZONE_NUM_SIZE))
#define DIRCHUNK ((int) (CDIRECT * DIR_ENTRY_SIZE))
char *prog, *fsck_device; /* program name (fsck), device name */
int firstcnterr; /* is this the first inode ref cnt error? */
bitchunk_t *imap, *spec_imap; /* inode bit maps */
bitchunk_t *zmap, *spec_zmap; /* zone bit maps */
bitchunk_t *dirmap; /* directory (inode) bit map */
char *rwbuf; /* one block buffer cache */
block_nr thisblk; /* block in buffer cache */
char *nullbuf; /* null buffer */
nlink_t *count; /* inode count */
int changed; /* has the diskette been written to? */
struct stack {
dir_struct *st_dir;
struct stack *st_next;
char st_presence;
} *ftop;
int dev; /* file descriptor of the device */
#define DOT 1
#define DOTDOT 2
/* Counters for each type of inode/zone. */
int nfreeinode, nregular, ndirectory, nblkspec, ncharspec, nbadinode;
int nsock, npipe, nsyml, ztype[NLEVEL];
long nfreezone;
int repair, notrepaired = 0, automatic, listing, listsuper; /* flags */
int preen = 0, markdirty = 0;
int firstlist; /* has the listing header been printed? */
unsigned part_offset; /* sector offset for this partition */
char answer[] = "Answer questions with y or n. Then hit RETURN";
int main(int argc, char **argv);
void initvars(void);
void fatal(char *s);
int eoln(int c);
int yes(char *question);
int atoo(char *s);
int input(char *buf, int size);
char *alloc(unsigned nelem, unsigned elsize);
void printname(char *s);
void printrec(struct stack *sp);
void printpath(int mode, int nlcr);
void devopen(void);
void devclose(void);
void devio(block_nr bno, int dir);
void devread(long block, long offset, char *buf, int size);
void devwrite(long block, long offset, char *buf, int size);
void pr(char *fmt, int cnt, char *s, char *p);
void lpr(char *fmt, long cnt, char *s, char *p);
bit_nr getnumber(char *s);
char **getlist(char ***argv, char *type);
void lsuper(void);
#define SUPER_GET 0
#define SUPER_PUT 1
void rw_super(int mode);
void chksuper(void);
void lsi(char **clist);
bitchunk_t *allocbitmap(int nblk);
void loadbitmap(bitchunk_t *bitmap, block_nr bno, int nblk);
void dumpbitmap(bitchunk_t *bitmap, block_nr bno, int nblk);
void fillbitmap(bitchunk_t *bitmap, bit_nr lwb, bit_nr upb, char
**list);
void freebitmap(bitchunk_t *p);
void getbitmaps(void);
void putbitmaps(void);
void chkword(unsigned w1, unsigned w2, bit_nr bit, char *type, int *n,
int *report, bit_t);
void chkmap(bitchunk_t *cmap, bitchunk_t *dmap, bit_nr bit, block_nr
blkno, int nblk, char *type);
void chkilist(void);
void getcount(void);
void counterror(ino_t ino);
void chkcount(void);
void freecount(void);
void printperm(mode_t mode, int shift, int special, int overlay);
void list(ino_t ino, d_inode *ip);
int Remove(dir_struct *dp);
void make_printable_name(char *dst, char *src, int n);
int chkdots(ino_t ino, off_t pos, dir_struct *dp, ino_t exp);
int chkname(ino_t ino, dir_struct *dp);
int chkentry(ino_t ino, off_t pos, dir_struct *dp);
int chkdirzone(ino_t ino, d_inode *ip, off_t pos, zone_nr zno);
int chksymlinkzone(ino_t ino, d_inode *ip, off_t pos, zone_nr zno);
void errzone(char *mess, zone_nr zno, int level, off_t pos);
int markzone(zone_nr zno, int level, off_t pos);
int chkindzone(ino_t ino, d_inode *ip, off_t *pos, zone_nr zno, int
level);
off_t jump(int level);
int zonechk(ino_t ino, d_inode *ip, off_t *pos, zone_nr zno, int level);
int chkzones(ino_t ino, d_inode *ip, off_t *pos, zone_nr *zlist, int
len, int level);
int chkfile(ino_t ino, d_inode *ip);
int chkdirectory(ino_t ino, d_inode *ip);
int chklink(ino_t ino, d_inode *ip);
int chkspecial(ino_t ino, d_inode *ip);
int chkmode(ino_t ino, d_inode *ip);
int chkinode(ino_t ino, d_inode *ip);
int descendtree(dir_struct *dp);
void chktree(void);
void printtotal(void);
void chkdev(char *f, char **clist, char **ilist, char **zlist);
/* Initialize the variables used by this program. */
void initvars()
{
register int level;
nregular = ndirectory = nblkspec = ncharspec =
nbadinode = nsock = npipe = nsyml = 0;
for (level = 0; level < NLEVEL; level++) ztype[level] = 0;
changed = 0;
thisblk = NO_BLOCK;
firstlist = 1;
firstcnterr = 1;
}
/* Print the string `s' and exit. */
void fatal(s)
char *s;
{
printf("%s\nfatal\n", s);
exit(FSCK_EXIT_CHECK_FAILED);
}
/* Test for end of line. */
int eoln(c)
int c;
{
return(c == EOF || c == '\n' || c == '\r');
}
/* Ask a question and get the answer unless automatic is set. */
int yes(question)
char *question;
{
register int c, answerchar;
static int note = 0;
int yes;
if (!repair) {
printf("\n");
return(0);
}
printf("%s? ", question);
if(!note) { printf("(y=yes, n=no, q=quit, A=for yes to all) "); note = 1; }
if (automatic) {
printf("yes\n");
return(1);
}
fflush(stdout);
if ((c = answerchar = getchar()) == 'q' || c == 'Q') exit(FSCK_EXIT_CHECK_FAILED);
if(c == 'A') { automatic = 1; c = 'y'; }
while (!eoln(c)) c = getchar();
yes = !(answerchar == 'n' || answerchar == 'N');
if(!yes) notrepaired = 1;
return yes;
}
/* Convert string to integer. Representation is octal. */
int atoo(s)
register char *s;
{
register int n = 0;
while ('0' <= *s && *s < '8') {
n <<= 3;
n += *s++ - '0';
}
return n;
}
/* If repairing the file system, print a prompt and get a string from user. */
int input(buf, size)
char *buf;
int size;
{
register char *p = buf;
printf("\n");
if (repair) {
printf("--> ");
fflush(stdout);
while (--size) {
*p = getchar();
if (eoln(*p)) {
*p = 0;
return(p > buf);
}
p++;
}
*p = 0;
while (!eoln(getchar()));
return(1);
}
return(0);
}
/* Allocate some memory and zero it. */
char *alloc(nelem, elsize)
unsigned nelem, elsize;
{
char *p;
if ((p = (char *)malloc((size_t)nelem * elsize)) == 0) {
fprintf(stderr, "Tried to allocate %dkB\n",
nelem*elsize/1024);
fatal("out of memory");
}
memset((void *) p, 0, (size_t)nelem * elsize);
return(p);
}
/* Print the name in a directory entry. */
void printname(s)
char *s;
{
register int n = MFS_NAME_MAX;
int c;
do {
if ((c = *s) == 0) break;
if (!isprint(c)) c = '?';
putchar(c);
s++;
} while (--n);
}
/* Print the pathname given by a linked list pointed to by `sp'. The
* names are in reverse order.
*/
void printrec(struct stack *sp)
{
if (sp->st_next != 0) {
printrec(sp->st_next);
putchar('/');
printname(sp->st_dir->mfs_d_name);
}
}
/* Print the current pathname. */
void printpath(mode, nlcr)
int mode;
int nlcr;
{
if (ftop->st_next == 0)
putchar('/');
else
printrec(ftop);
switch (mode) {
case 1:
printf(" (ino = %u, ", ftop->st_dir->d_inum);
break;
case 2:
printf(" (ino = %u)", ftop->st_dir->d_inum);
break;
}
if (nlcr) printf("\n");
}
/* Open the device. */
void devopen()
{
if ((dev = open(fsck_device,
(repair || markdirty) ? O_RDWR : O_RDONLY)) < 0) {
perror(fsck_device);
fatal("couldn't open device to fsck");
}
}
/* Close the device. */
void devclose()
{
if (close(dev) != 0) {
perror("close");
fatal("");
}
}
/* Read or write a block. */
void devio(bno, dir)
block_nr bno;
int dir;
{
int r;
if(!block_size) fatal("devio() with unknown block size");
if (dir == READING && bno == thisblk) return;
thisblk = bno;
#if 0
printf("%s at block %5d\n", dir == READING ? "reading " : "writing", bno);
#endif
r= lseek64(dev, btoa64(bno), SEEK_SET, NULL);
if (r != 0)
fatal("lseek64 failed");
if (dir == READING) {
if (read(dev, rwbuf, block_size) == block_size)
return;
} else {
if (write(dev, rwbuf, block_size) == block_size)
return;
}
printf("%s: can't %s block %ld (error = 0x%x)\n", prog,
dir == READING ? "read" : "write", (long) bno, errno);
if (dir == READING) {
printf("Continuing with a zero-filled block.\n");
memset(rwbuf, 0, block_size);
return;
}
fatal("");
}
/* Read `size' bytes from the disk starting at block 'block' and
* byte `offset'.
*/
void devread(block, offset, buf, size)
long block;
long offset;
char *buf;
int size;
{
if(!block_size) fatal("devread() with unknown block size");
if (offset >= block_size)
{
block += offset/block_size;
offset %= block_size;
}
devio(block, READING);
memmove(buf, &rwbuf[offset], size);
}
/* Write `size' bytes to the disk starting at block 'block' and
* byte `offset'.
*/
void devwrite(block, offset, buf, size)
long block;
long offset;
char *buf;
int size;
{
if(!block_size) fatal("devwrite() with unknown block size");
if (!repair) fatal("internal error (devwrite)");
if (offset >= block_size)
{
block += offset/block_size;
offset %= block_size;
}
if (size != block_size) devio(block, READING);
memmove(&rwbuf[offset], buf, size);
devio(block, WRITING);
changed = 1;
}
/* Print a string with either a singular or a plural pronoun. */
void pr(fmt, cnt, s, p)
char *fmt, *s, *p;
int cnt;
{
printf(fmt, cnt, cnt == 1 ? s : p);
}
/* Same as above, but with a long argument */
void lpr(fmt, cnt, s, p)
char *fmt, *s, *p;
long cnt;
{
printf(fmt, cnt, cnt == 1 ? s : p);
}
/* Convert string to number. */
bit_nr getnumber(s)
register char *s;
{
register bit_nr n = 0;
if (s == NULL)
return NO_BIT;
while (isdigit(*s))
n = (n << 1) + (n << 3) + *s++ - '0';
return (*s == '\0') ? n : NO_BIT;
}
/* See if the list pointed to by `argv' contains numbers. */
char **getlist(argv, type)
char ***argv, *type;
{
register char **list = *argv;
register int empty = 1;
while (getnumber(**argv) != NO_BIT) {
(*argv)++;
empty = 0;
}
if (empty) {
printf("warning: no %s numbers given\n", type);
return(NULL);
}
return(list);
}
/* Make a listing of the super block. If `repair' is set, ask the user
* for changes.
*/
void lsuper()
{
char buf[80];
do {
/* Most of the following atol's enrage lint, for good reason. */
printf("ninodes = %u", sb.s_ninodes);
if (input(buf, 80)) sb.s_ninodes = atol(buf);
printf("nzones = %d", sb.s_zones);
if (input(buf, 80)) sb.s_zones = atol(buf);
printf("imap_blocks = %u", sb.s_imap_blocks);
if (input(buf, 80)) sb.s_imap_blocks = atol(buf);
printf("zmap_blocks = %u", sb.s_zmap_blocks);
if (input(buf, 80)) sb.s_zmap_blocks = atol(buf);
printf("firstdatazone = %u", sb.s_firstdatazone_old);
if (input(buf, 80)) sb.s_firstdatazone_old = atol(buf);
printf("log_zone_size = %u", sb.s_log_zone_size);
if (input(buf, 80)) sb.s_log_zone_size = atol(buf);
printf("maxsize = %d", sb.s_max_size);
if (input(buf, 80)) sb.s_max_size = atol(buf);
printf("block size = %d", sb.s_block_size);
if (input(buf, 80)) sb.s_block_size = atol(buf);
if (yes("ok now")) {
devwrite(0, OFFSET_SUPER_BLOCK, (char *) &sb, sizeof(sb));
return;
}
printf("flags = ");
if(sb.s_flags & MFSFLAG_CLEAN) printf("CLEAN "); else printf("DIRTY ");
printf("\n");
} while (yes("Do you want to try again"));
if (repair) exit(FSCK_EXIT_OK);
}
/* Get the super block from either disk or user. Do some initial checks. */
void rw_super(int put)
{
if(lseek(dev, OFFSET_SUPER_BLOCK, SEEK_SET) < 0) {
perror("lseek");
fatal("couldn't seek to super block.");
}
if(put == SUPER_PUT) {
if(write(dev, &sb, sizeof(sb)) != sizeof(sb)) {
fatal("couldn't write super block.");
}
return;
}
if(read(dev, &sb, sizeof(sb)) != sizeof(sb)) {
fatal("couldn't read super block.");
}
if (listsuper) lsuper();
if (sb.s_magic == SUPER_MAGIC) fatal("Cannot handle V1 file systems");
if (sb.s_magic == SUPER_V2) {
fs_version = 2;
block_size = /* STATIC_BLOCK_SIZE */ 8192;
} else if(sb.s_magic == SUPER_V3) {
fs_version = 3;
block_size = sb.s_block_size;
} else {
fatal("bad magic number in super block");
}
if (sb.s_ninodes <= 0) fatal("no inodes");
if (sb.s_zones <= 0) fatal("no zones");
if (sb.s_imap_blocks <= 0) fatal("no imap");
if (sb.s_zmap_blocks <= 0) fatal("no zmap");
if (sb.s_firstdatazone != 0 && sb.s_firstdatazone <= 4)
fatal("first data zone too small");
if (sb.s_log_zone_size < 0) fatal("zone size < block size");
if (sb.s_max_size <= 0) {
printf("warning: invalid max file size %d\n", sb.s_max_size);
sb.s_max_size = LONG_MAX;
}
}
/* Check the super block for reasonable contents. */
void chksuper()
{
register int n;
register off_t maxsize;
n = bitmapsize((bit_t) sb.s_ninodes + 1, block_size);
if (sb.s_magic != SUPER_V2 && sb.s_magic != SUPER_V3)
fatal("bad magic number in super block");
if (sb.s_imap_blocks < n) {
printf("need %d bocks for inode bitmap; only have %d\n",
n, sb.s_imap_blocks);
fatal("too few imap blocks");
}
if (sb.s_imap_blocks != n) {
pr("warning: expected %d imap_block%s", n, "", "s");
printf(" instead of %d\n", sb.s_imap_blocks);
}
n = bitmapsize((bit_t) sb.s_zones, block_size);
if (sb.s_zmap_blocks < n) fatal("too few zmap blocks");
if (sb.s_zmap_blocks != n) {
pr("warning: expected %d zmap_block%s", n, "", "s");
printf(" instead of %d\n", sb.s_zmap_blocks);
}
if (sb.s_log_zone_size >= 8 * sizeof(block_nr))
fatal("log_zone_size too large");
if (sb.s_log_zone_size > 8) printf("warning: large log_zone_size (%d)\n",
sb.s_log_zone_size);
sb.s_firstdatazone = (BLK_ILIST + N_ILIST + SCALE - 1) >> sb.s_log_zone_size;
if (sb.s_firstdatazone_old != 0) {
if (sb.s_firstdatazone_old >= sb.s_zones)
fatal("first data zone too large");
if (sb.s_firstdatazone_old < sb.s_firstdatazone)
fatal("first data zone too small");
if (sb.s_firstdatazone_old != sb.s_firstdatazone) {
printf("warning: expected first data zone to be %u ",
sb.s_firstdatazone);
printf("instead of %u\n", sb.s_firstdatazone_old);
sb.s_firstdatazone = sb.s_firstdatazone_old;
}
}
maxsize = MAX_FILE_POS;
if (((maxsize - 1) >> sb.s_log_zone_size) / block_size >= MAX_ZONES)
maxsize = ((long) MAX_ZONES * block_size) << sb.s_log_zone_size;
if(maxsize <= 0)
maxsize = LONG_MAX;
if (sb.s_max_size != maxsize) {
printf("warning: expected max size to be %d ", maxsize);
printf("instead of %d\n", sb.s_max_size);
}
if(sb.s_flags & MFSFLAG_MANDATORY_MASK) {
fatal("unsupported feature bits - newer fsck needed");
}
}
int inoblock(int inn)
{
return div64u(mul64u(inn - 1, INODE_SIZE), block_size) + BLK_ILIST;
}
int inooff(int inn)
{
return rem64u(mul64u(inn - 1, INODE_SIZE), block_size);
}
/* Make a listing of the inodes given by `clist'. If `repair' is set, ask
* the user for changes.
*/
void lsi(clist)
char **clist;
{
register bit_nr bit;
register ino_t ino;
d_inode inode, *ip = &inode;
char buf[80];
if (clist == 0) return;
while ((bit = getnumber(*clist++)) != NO_BIT) {
setbit(spec_imap, bit);
ino = bit;
do {
devread(inoblock(ino), inooff(ino), (char *) ip, INODE_SIZE);
printf("inode %u:\n", ino);
printf(" mode = %6o", ip->i_mode);
if (input(buf, 80)) ip->i_mode = atoo(buf);
printf(" nlinks = %6u", ip->i_nlinks);
if (input(buf, 80)) ip->i_nlinks = atol(buf);
printf(" size = %6d", ip->i_size);
if (input(buf, 80)) ip->i_size = atol(buf);
if (yes("Write this back")) {
devwrite(inoblock(ino), inooff(ino), (char *) ip,
INODE_SIZE);
break;
}
} while (yes("Do you want to change it again"));
}
}
/* Allocate `nblk' blocks worth of bitmap. */
bitchunk_t *allocbitmap(nblk)
int nblk;
{
register bitchunk_t *bitmap;
bitmap = (bitchunk_t *) alloc((unsigned) nblk, block_size);
*bitmap |= 1;
return(bitmap);
}
/* Load the bitmap starting at block `bno' from disk. */
void loadbitmap(bitmap, bno, nblk)
bitchunk_t *bitmap;
block_nr bno;
int nblk;
{
register int i;
register bitchunk_t *p;
p = bitmap;
for (i = 0; i < nblk; i++, bno++, p += WORDS_PER_BLOCK)
devread(bno, 0, (char *) p, block_size);
*bitmap |= 1;
}
/* Write the bitmap starting at block `bno' to disk. */
void dumpbitmap(bitmap, bno, nblk)
bitchunk_t *bitmap;
block_nr bno;
int nblk;
{
register int i;
register bitchunk_t *p = bitmap;
for (i = 0; i < nblk; i++, bno++, p += WORDS_PER_BLOCK)
devwrite(bno, 0, (char *) p, block_size);
}
/* Set the bits given by `list' in the bitmap. */
void fillbitmap(bitmap, lwb, upb, list)
bitchunk_t *bitmap;
bit_nr lwb, upb;
char **list;
{
register bit_nr bit;
if (list == 0) return;
while ((bit = getnumber(*list++)) != NO_BIT)
if (bit < lwb || bit >= upb) {
if (bitmap == spec_imap)
printf("inode number %d ", bit);
else
printf("zone number %d ", bit);
printf("out of range (ignored)\n");
} else
setbit(bitmap, bit - lwb + 1);
}
/* Deallocate the bitmap `p'. */
void freebitmap(p)
bitchunk_t *p;
{
free((char *) p);
}
/* Get all the bitmaps used by this program. */
void getbitmaps()
{
imap = allocbitmap(N_IMAP);
zmap = allocbitmap(N_ZMAP);
spec_imap = allocbitmap(N_IMAP);
spec_zmap = allocbitmap(N_ZMAP);
dirmap = allocbitmap(N_IMAP);
}
/* Release all the space taken by the bitmaps. */
void putbitmaps()
{
freebitmap(imap);
freebitmap(zmap);
freebitmap(spec_imap);
freebitmap(spec_zmap);
freebitmap(dirmap);
}
/* `w1' and `w2' are differing words from two bitmaps that should be
* identical. Print what's the matter with them.
*/
void chkword(w1, w2, bit, type, n, report, phys)
unsigned w1, w2;
char *type;
bit_nr bit;
int *n, *report;
bit_nr phys;
{
for (; (w1 | w2); w1 >>= 1, w2 >>= 1, bit++, phys++)
if ((w1 ^ w2) & 1 && ++(*n) % MAXPRINT == 0 && *report &&
(!repair || automatic || yes("stop this listing")))
*report = 0;
else {
if (*report)
if ((w1 & 1) && !(w2 & 1))
printf("%s %d is missing\n", type, bit);
else if (!(w1 & 1) && (w2 & 1))
printf("%s %d is not free\n", type, bit);
}
}
/* Check if the given (correct) bitmap is identical with the one that is
* on the disk. If not, ask if the disk should be repaired.
*/
void chkmap(cmap, dmap, bit, blkno, nblk, type)
bitchunk_t *cmap, *dmap;
bit_nr bit;
block_nr blkno;
int nblk;
char *type;
{
register bitchunk_t *p = dmap, *q = cmap;
int report = 1, nerr = 0;
int w = nblk * WORDS_PER_BLOCK;
bit_nr phys = 0;
printf("Checking %s map. ", type);
if(!preen) printf("\n");
fflush(stdout);
loadbitmap(dmap, blkno, nblk);
do {
if (*p != *q) chkword(*p, *q, bit, type, &nerr, &report, phys);
p++;
q++;
bit += 8 * sizeof(bitchunk_t);
phys += 8 * sizeof(bitchunk_t);
} while (--w > 0);
if ((!repair || automatic) && !report) printf("etc. ");
if (nerr > MAXPRINT || nerr > 10) printf("%d errors found. ", nerr);
if (nerr != 0 && yes("install a new map")) dumpbitmap(cmap, blkno, nblk);
if (nerr > 0) printf("\n");
}
/* See if the inodes that aren't allocated are cleared. */
void chkilist()
{
register ino_t ino = 1;
mode_t mode;
printf("Checking inode list. ");
if(!preen) printf("\n");
fflush(stdout);
do
if (!bitset(imap, (bit_nr) ino)) {
devread(inoblock(ino), inooff(ino), (char *) &mode,
sizeof(mode));
if (mode != I_NOT_ALLOC) {
printf("mode inode %u not cleared", ino);
if (yes(". clear")) devwrite(inoblock(ino),
inooff(ino), nullbuf, INODE_SIZE);
}
}
while (++ino <= sb.s_ninodes && ino != 0);
if(!preen) printf("\n");
}
/* Allocate an array to maintain the inode reference counts in. */
void getcount()
{
count = (nlink_t *) alloc((unsigned) (sb.s_ninodes + 1), sizeof(nlink_t));
}
/* The reference count for inode `ino' is wrong. Ask if it should be adjusted. */
void counterror(ino_t ino)
{
d_inode inode;
if (firstcnterr) {
printf("INODE NLINK COUNT\n");
firstcnterr = 0;
}
devread(inoblock(ino), inooff(ino), (char *) &inode, INODE_SIZE);
count[ino] += inode.i_nlinks; /* it was already subtracted; add it back */
printf("%5u %5u %5u", ino, (unsigned) inode.i_nlinks, count[ino]);
if (yes(" adjust")) {
if ((inode.i_nlinks = count[ino]) == 0) {
fatal("internal error (counterror)");
inode.i_mode = I_NOT_ALLOC;
clrbit(imap, (bit_nr) ino);
}
devwrite(inoblock(ino), inooff(ino), (char *) &inode, INODE_SIZE);
}
}
/* Check if the reference count of the inodes are correct. The array `count'
* is maintained as follows: an entry indexed by the inode number is
* incremented each time a link is found; when the inode is read the link
* count in there is substracted from the corresponding entry in `count'.
* Thus, when the whole file system has been traversed, all the entries
* should be zero.
*/
void chkcount()
{
register ino_t ino;
for (ino = 1; ino <= sb.s_ninodes && ino != 0; ino++)
if (count[ino] != 0) counterror(ino);
if (!firstcnterr) printf("\n");
}
/* Deallocate the `count' array. */
void freecount()
{
free((char *) count);
}
/* Print the inode permission bits given by mode and shift. */
void printperm(mode_t mode, int shift, int special, int overlay)
{
if (mode >> shift & R_BIT)
putchar('r');
else
putchar('-');
if (mode >> shift & W_BIT)
putchar('w');
else
putchar('-');
if (mode & special)
putchar(overlay);
else
if (mode >> shift & X_BIT)
putchar('x');
else
putchar('-');
}
/* List the given inode. */
void list(ino_t ino, d_inode *ip)
{
if (firstlist) {
firstlist = 0;
printf(" inode permission link size name\n");
}
printf("%6u ", ino);
switch (ip->i_mode & I_TYPE) {
case I_REGULAR: putchar('-'); break;
case I_DIRECTORY: putchar('d'); break;
case I_CHAR_SPECIAL: putchar('c'); break;
case I_BLOCK_SPECIAL: putchar('b'); break;
case I_NAMED_PIPE: putchar('p'); break;
case I_UNIX_SOCKET: putchar('s'); break;
#ifdef I_SYMBOLIC_LINK
case I_SYMBOLIC_LINK: putchar('l'); break;
#endif
default: putchar('?');
}
printperm(ip->i_mode, 6, I_SET_UID_BIT, 's');
printperm(ip->i_mode, 3, I_SET_GID_BIT, 's');
printperm(ip->i_mode, 0, STICKY_BIT, 't');
printf(" %3u ", ip->i_nlinks);
switch (ip->i_mode & I_TYPE) {
case I_CHAR_SPECIAL:
case I_BLOCK_SPECIAL:
printf(" %2x,%2x ", major(ip->i_zone[0]), minor(ip->i_zone[0]));
break;
default: printf("%7d ", ip->i_size);
}
printpath(0, 1);
}
/* Remove an entry from a directory if ok with the user.
* Don't name the function remove() - that is owned by ANSI, and chaos results
* when it is a macro.
*/
int Remove(dir_struct *dp)
{
setbit(spec_imap, (bit_nr) dp->d_inum);
if (yes(". remove entry")) {
count[dp->d_inum]--;
memset((void *) dp, 0, sizeof(dir_struct));
return(1);
}
return(0);
}
/* Convert string so that embedded control characters are printable. */
void make_printable_name(dst, src, n)
register char *dst;
register char *src;
register int n;
{
register int c;
while (--n >= 0 && (c = *src++) != '\0') {
if (isprint(c) && c != '\\')
*dst++ = c;
else {
*dst++ = '\\';
switch (c) {
case '\\':
*dst++ = '\\'; break;
case '\b':
*dst++ = 'b'; break;
case '\f':
*dst++ = 'f'; break;
case '\n':
*dst++ = 'n'; break;
case '\r':
*dst++ = 'r'; break;
case '\t':
*dst++ = 't'; break;
default:
*dst++ = '0' + ((c >> 6) & 03);
*dst++ = '0' + ((c >> 3) & 07);
*dst++ = '0' + (c & 07);
}
}
}
*dst = '\0';
}
/* See if the `.' or `..' entry is as expected. */
int chkdots(ino_t ino, off_t pos, dir_struct *dp, ino_t exp)
{
char printable_name[4 * MFS_NAME_MAX + 1];
if (dp->d_inum != exp) {
make_printable_name(printable_name, dp->mfs_d_name, sizeof(dp->mfs_d_name));
printf("bad %s in ", printable_name);
printpath(1, 0);
printf("%s is linked to %u ", printable_name, dp->d_inum);
printf("instead of %u)", exp);
setbit(spec_imap, (bit_nr) ino);
setbit(spec_imap, (bit_nr) dp->d_inum);
setbit(spec_imap, (bit_nr) exp);
if (yes(". repair")) {
count[dp->d_inum]--;
dp->d_inum = exp;
count[exp]++;
return(0);
}
} else if (pos != (dp->mfs_d_name[1] ? DIR_ENTRY_SIZE : 0)) {
make_printable_name(printable_name, dp->mfs_d_name, sizeof(dp->mfs_d_name));
printf("warning: %s has offset %d in ", printable_name, pos);
printpath(1, 0);
printf("%s is linked to %u)\n", printable_name, dp->d_inum);
setbit(spec_imap, (bit_nr) ino);
setbit(spec_imap, (bit_nr) dp->d_inum);
setbit(spec_imap, (bit_nr) exp);
}
return(1);
}
/* Check the name in a directory entry. */
int chkname(ino_t ino, dir_struct *dp)
{
register int n = MFS_NAME_MAX + 1;
register char *p = dp->mfs_d_name;
if (*p == '\0') {
printf("null name found in ");
printpath(0, 0);
setbit(spec_imap, (bit_nr) ino);
if (Remove(dp)) return(0);
}
while (*p != '\0' && --n != 0)
if (*p++ == '/') {
printf("found a '/' in entry of directory ");
printpath(1, 0);
setbit(spec_imap, (bit_nr) ino);
printf("entry = '");
printname(dp->mfs_d_name);
printf("')");
if (Remove(dp)) return(0);
break;
}
return(1);
}
/* Check a directory entry. Here the routine `descendtree' is called
* recursively to check the file or directory pointed to by the entry.
*/
int chkentry(ino_t ino, off_t pos, dir_struct *dp)
{
if (dp->d_inum < ROOT_INODE || dp->d_inum > sb.s_ninodes) {
printf("bad inode found in directory ");
printpath(1, 0);
printf("ino found = %u, ", dp->d_inum);
printf("name = '");
printname(dp->mfs_d_name);
printf("')");
if (yes(". remove entry")) {
memset((void *) dp, 0, sizeof(dir_struct));
return(0);
}
return(1);
}
if ((unsigned) count[dp->d_inum] == SHRT_MAX) {
printf("too many links to ino %u\n", dp->d_inum);
printf("discovered at entry '");
printname(dp->mfs_d_name);
printf("' in directory ");
printpath(0, 1);
if (Remove(dp)) return(0);
}
count[dp->d_inum]++;
if (strcmp(dp->mfs_d_name, ".") == 0) {
ftop->st_presence |= DOT;
return(chkdots(ino, pos, dp, ino));
}
if (strcmp(dp->mfs_d_name, "..") == 0) {
ftop->st_presence |= DOTDOT;
return(chkdots(ino, pos, dp, ino == ROOT_INODE ? ino :
ftop->st_next->st_dir->d_inum));
}
if (!chkname(ino, dp)) return(0);
if (bitset(dirmap, (bit_nr) dp->d_inum)) {
printf("link to directory discovered in ");
printpath(1, 0);
printf("name = '");
printname(dp->mfs_d_name);
printf("', dir ino = %u)", dp->d_inum);
return !Remove(dp);
}
return(descendtree(dp));
}
/* Check a zone of a directory by checking all the entries in the zone.
* The zone is split up into chunks to not allocate too much stack.
*/
int chkdirzone(ino_t ino, d_inode *ip, off_t pos, zone_nr zno)
{
dir_struct dirblk[CDIRECT];
register dir_struct *dp;
register int n, dirty;
long block= ztob(zno);
register long offset = 0;
register off_t size = 0;
n = SCALE * (NR_DIR_ENTRIES(block_size) / CDIRECT);
do {
devread(block, offset, (char *) dirblk, DIRCHUNK);
dirty = 0;
for (dp = dirblk; dp < &dirblk[CDIRECT]; dp++) {
if (dp->d_inum != NO_ENTRY && !chkentry(ino, pos, dp))
dirty = 1;
pos += DIR_ENTRY_SIZE;
if (dp->d_inum != NO_ENTRY) size = pos;
}
if (dirty) devwrite(block, offset, (char *) dirblk, DIRCHUNK);
offset += DIRCHUNK;
n--;
} while (n > 0);
if (size > ip->i_size) {
printf("size not updated of directory ");
printpath(2, 0);
if (yes(". extend")) {
setbit(spec_imap, (bit_nr) ino);
ip->i_size = size;
devwrite(inoblock(ino), inooff(ino), (char *) ip, INODE_SIZE);
}
}
return(1);
}
int chksymlinkzone(ino_t ino, d_inode *ip, off_t pos, zone_nr zno)
{
long block;
size_t len;
char target[PATH_MAX+1];
if (ip->i_size > PATH_MAX)
fatal("chksymlinkzone: fsck program inconsistency\n");
block= ztob(zno);
devread(block, 0, target, ip->i_size);
target[ip->i_size]= '\0';
len= strlen(target);
if (len != ip->i_size)
{
printf("bad size in symbolic link (%d instead of %d) ",
ip->i_size, len);
printpath(2, 0);
if (yes(". update")) {
setbit(spec_imap, (bit_nr) ino);
ip->i_size = len;
devwrite(inoblock(ino), inooff(ino),
(char *) ip, INODE_SIZE);
}
}
return 1;
}
/* There is something wrong with the given zone. Print some details. */
void errzone(mess, zno, level, pos)
char *mess;
zone_nr zno;
int level;
off_t pos;
{
printf("%s zone in ", mess);
printpath(1, 0);
printf("zno = %d, type = ", zno);
switch (level) {
case 0: printf("DATA"); break;
case 1: printf("SINGLE INDIRECT"); break;
case 2: printf("DOUBLE INDIRECT"); break;
default: printf("VERY INDIRECT");
}
printf(", pos = %d)\n", pos);
}
/* Found the given zone in the given inode. Check it, and if ok, mark it
* in the zone bitmap.
*/
int markzone(zno, level, pos)
zone_nr zno;
int level;
off_t pos;
{
register bit_nr bit = (bit_nr) zno - FIRST + 1;
ztype[level]++;
if (zno < FIRST || zno >= sb.s_zones) {
errzone("out-of-range", zno, level, pos);
return(0);
}
if (bitset(zmap, bit)) {
setbit(spec_zmap, bit);
errzone("duplicate", zno, level, pos);
return(0);
}
nfreezone--;
if (bitset(spec_zmap, bit)) errzone("found", zno, level, pos);
setbit(zmap, bit);
return(1);
}
/* Check an indirect zone by checking all of its entries.
* The zone is split up into chunks to not allocate too much stack.
*/
int chkindzone(ino_t ino, d_inode *ip, off_t *pos, zone_nr zno, int level)
{
zone_nr indirect[CINDIR];
register int n = NR_INDIRECTS / CINDIR;
long block= ztob(zno);
register long offset = 0;
do {
devread(block, offset, (char *) indirect, INDCHUNK);
if (!chkzones(ino, ip, pos, indirect, CINDIR, level - 1)) return(0);
offset += INDCHUNK;
} while (--n && *pos < ip->i_size);
return(1);
}
/* Return the size of a gap in the file, represented by a null zone number
* at some level of indirection.
*/
off_t jump(level)
int level;
{
off_t power = ZONE_SIZE;
if (level != 0) do
power *= NR_INDIRECTS;
while (--level);
return(power);
}
/* Check a zone, which may be either a normal data zone, a directory zone,
* or an indirect zone.
*/
int zonechk(ino_t ino, d_inode *ip, off_t *pos, zone_nr zno, int level)
{
if (level == 0) {
if ((ip->i_mode & I_TYPE) == I_DIRECTORY &&
!chkdirzone(ino, ip, *pos, zno))
return(0);
if ((ip->i_mode & I_TYPE) == I_SYMBOLIC_LINK &&
!chksymlinkzone(ino, ip, *pos, zno))
return(0);
*pos += ZONE_SIZE;
return(1);
} else
return chkindzone(ino, ip, pos, zno, level);
}
/* Check a list of zones given by `zlist'. */
int chkzones(ino_t ino, d_inode *ip, off_t *pos, zone_nr *zlist,
int len, int level)
{
register int ok = 1, i;
/* The check on the position in the next loop is commented out, since FS
* now requires valid zone numbers in each level that is necessary and FS
* always deleted all the zones in the double indirect block.
*/
for (i = 0; i < len /* && *pos < ip->i_size */ ; i++)
if (zlist[i] == NO_ZONE)
*pos += jump(level);
else if (!markzone(zlist[i], level, *pos)) {
*pos += jump(level);
ok = 0;
} else if (!zonechk(ino, ip, pos, zlist[i], level))
ok = 0;
return(ok);
}
/* Check a file or a directory. */
int chkfile(ino_t ino, d_inode *ip)
{
register int ok, i, level;
off_t pos = 0;
ok = chkzones(ino, ip, &pos, &ip->i_zone[0], NR_DZONE_NUM, 0);
for (i = NR_DZONE_NUM, level = 1; i < NR_ZONE_NUMS; i++, level++)
ok &= chkzones(ino, ip, &pos, &ip->i_zone[i], 1, level);
return(ok);
}
/* Check a directory by checking the contents. Check if . and .. are present. */
int chkdirectory(ino_t ino, d_inode *ip)
{
register int ok;
setbit(dirmap, (bit_nr) ino);
ok = chkfile(ino, ip);
if (!(ftop->st_presence & DOT)) {
printf(". missing in ");
printpath(2, 1);
ok = 0;
}
if (!(ftop->st_presence & DOTDOT)) {
printf(".. missing in ");
printpath(2, 1);
ok = 0;
}
return(ok);
}
#ifdef I_SYMBOLIC_LINK
/* Check the validity of a symbolic link. */
int chklink(ino_t ino, d_inode *ip)
{
int ok;
ok = chkfile(ino, ip);
if (ip->i_size <= 0 || ip->i_size > block_size) {
if (ip->i_size == 0)
printf("empty symbolic link ");
else
printf("symbolic link too large (size %d) ", ip->i_size);
printpath(2, 1);
ok = 0;
}
return(ok);
}
#endif
/* Check the validity of a special file. */
int chkspecial(ino_t ino, d_inode *ip)
{
int i, ok;
ok = 1;
if ((dev_t) ip->i_zone[0] == NO_DEV) {
printf("illegal device number %d for special file ", ip->i_zone[0]);
printpath(2, 1);
ok = 0;
}
/* FS will not use the remaining "zone numbers" but 1.6.11++ will panic if
* they are nonzero, since this should not happen.
*/
for (i = 1; i < NR_ZONE_NUMS; i++)
if (ip->i_zone[i] != NO_ZONE) {
printf("nonzero zone number %d for special file ",
ip->i_zone[i]);
printpath(2, 1);
ok = 0;
}
return(ok);
}
/* Check the mode and contents of an inode. */
int chkmode(ino_t ino, d_inode *ip)
{
switch (ip->i_mode & I_TYPE) {
case I_REGULAR:
nregular++;
return chkfile(ino, ip);
case I_DIRECTORY:
ndirectory++;
return chkdirectory(ino, ip);
case I_BLOCK_SPECIAL:
nblkspec++;
return chkspecial(ino, ip);
case I_CHAR_SPECIAL:
ncharspec++;
return chkspecial(ino, ip);
case I_NAMED_PIPE:
npipe++;
return chkfile(ino, ip);
case I_UNIX_SOCKET:
nsock++;
return chkfile(ino, ip);
#ifdef I_SYMBOLIC_LINK
case I_SYMBOLIC_LINK:
nsyml++;
return chklink(ino, ip);
#endif
default:
nbadinode++;
printf("bad mode of ");
printpath(1, 0);
printf("mode = %o)", ip->i_mode);
return(0);
}
}
/* Check an inode. */
int chkinode(ino_t ino, d_inode *ip)
{
if (ino == ROOT_INODE && (ip->i_mode & I_TYPE) != I_DIRECTORY) {
printf("root inode is not a directory ");
printf("(ino = %u, mode = %o)\n", ino, ip->i_mode);
fatal("");
}
if (ip->i_nlinks == 0) {
printf("link count zero of ");
printpath(2, 0);
return(0);
}
nfreeinode--;
setbit(imap, (bit_nr) ino);
if ((unsigned) ip->i_nlinks > SHRT_MAX) {
printf("link count too big in ");
printpath(1, 0);
printf("cnt = %u)\n", (unsigned) ip->i_nlinks);
count[ino] -= SHRT_MAX;
setbit(spec_imap, (bit_nr) ino);
} else {
count[ino] -= (unsigned) ip->i_nlinks;
}
return chkmode(ino, ip);
}
/* Check the directory entry pointed to by dp, by checking the inode. */
int descendtree(dp)
dir_struct *dp;
{
d_inode inode;
register ino_t ino = dp->d_inum;
register int visited;
struct stack stk;
stk.st_dir = dp;
stk.st_next = ftop;
ftop = &stk;
if (bitset(spec_imap, (bit_nr) ino)) {
printf("found inode %u: ", ino);
printpath(0, 1);
}
visited = bitset(imap, (bit_nr) ino);
if (!visited || listing) {
devread(inoblock(ino), inooff(ino), (char *) &inode, INODE_SIZE);
if (listing) list(ino, &inode);
if (!visited && !chkinode(ino, &inode)) {
setbit(spec_imap, (bit_nr) ino);
if (yes("remove")) {
count[ino] += inode.i_nlinks - 1;
clrbit(imap, (bit_nr) ino);
devwrite(inoblock(ino), inooff(ino),
nullbuf, INODE_SIZE);
memset((void *) dp, 0, sizeof(dir_struct));
ftop = ftop->st_next;
return(0);
}
}
}
ftop = ftop->st_next;
return(1);
}
/* Check the file system tree. */
void chktree()
{
dir_struct dir;
nfreeinode = sb.s_ninodes;
nfreezone = N_DATA;
dir.d_inum = ROOT_INODE;
dir.mfs_d_name[0] = 0;
if (!descendtree(&dir)) fatal("bad root inode");
putchar('\n');
}
/* Print the totals of all the objects found. */
void printtotal()
{
if(preen) {
printf("%d files, %d directories, %d free inodes, %ld free zones\n",
nregular, ndirectory, nfreeinode, nfreezone);
return;
}
printf("blocksize = %5d ", block_size);
printf("zonesize = %5d\n", ZONE_SIZE);
printf("\n");
pr("%8u Regular file%s\n", nregular, "", "s");
pr("%8u Director%s\n", ndirectory, "y", "ies");
pr("%8u Block special file%s\n", nblkspec, "", "s");
pr("%8u Character special file%s\n", ncharspec, "", "s");
if (nbadinode != 0) pr("%6u Bad inode%s\n", nbadinode, "", "s");
pr("%8u Free inode%s\n", nfreeinode, "", "s");
pr("%8u Named pipe%s\n", npipe, "", "s");
pr("%8u Unix socket%s\n", nsock, "", "s");
pr("%8u Symbolic link%s\n", nsyml, "", "s");
/* Don't print some fields.
printf("\n");
pr("%8u Data zone%s\n", ztype[0], "", "s");
pr("%8u Single indirect zone%s\n", ztype[1], "", "s");
pr("%8u Double indirect zone%s\n", ztype[2], "", "s");
*/
lpr("%8ld Free zone%s\n", nfreezone, "", "s");
}
/* Check the device which name is given by `f'. The inodes listed by `clist'
* should be listed separately, and the inodes listed by `ilist' and the zones
* listed by `zlist' should be watched for while checking the file system.
*/
void chkdev(f, clist, ilist, zlist)
char *f, **clist, **ilist, **zlist;
{
if (automatic) repair = 1;
fsck_device = f;
initvars();
devopen();
rw_super(SUPER_GET);
if(block_size < _MIN_BLOCK_SIZE)
fatal("funny block size");
if(!(rwbuf = malloc(block_size))) fatal("couldn't allocate fs buf (1)");
if(!(nullbuf = malloc(block_size))) fatal("couldn't allocate fs buf (2)");
memset(nullbuf, 0, block_size);
chksuper();
if(markdirty) {
if(sb.s_flags & MFSFLAG_CLEAN) {
sb.s_flags &= ~MFSFLAG_CLEAN;
rw_super(SUPER_PUT);
printf("\n----- FILE SYSTEM MARKED DIRTY -----\n\n");
} else {
printf("Filesystem is already dirty.\n");
}
}
/* If preening, skip fsck if clean flag is on. */
if(preen) {
if(sb.s_flags & MFSFLAG_CLEAN) {
printf("%s: clean\n", f);
return;
}
printf("%s: dirty, performing fsck\n", f);
}
lsi(clist);
getbitmaps();
fillbitmap(spec_imap, (bit_nr) 1, (bit_nr) sb.s_ninodes + 1, ilist);
fillbitmap(spec_zmap, (bit_nr) FIRST, (bit_nr) sb.s_zones, zlist);
getcount();
chktree();
chkmap(zmap, spec_zmap, (bit_nr) FIRST - 1, BLK_ZMAP, N_ZMAP, "zone");
chkcount();
chkmap(imap, spec_imap, (bit_nr) 0, BLK_IMAP, N_IMAP, "inode");
chkilist();
if(preen) printf("\n");
printtotal();
putbitmaps();
freecount();
if (changed) printf("\n----- FILE SYSTEM HAS BEEN MODIFIED -----\n\n");
/* If we were told to repair the FS, and the user never stopped us from
* doing it, and the FS wasn't marked clean, we can mark the FS as clean.
* If we were stopped from repairing, tell user about it.
*/
if(repair && !(sb.s_flags & MFSFLAG_CLEAN)) {
if(notrepaired) {
printf("\n----- FILE SYSTEM STILL DIRTY -----\n\n");
} else {
sync(); /* update FS on disk before clean flag */
sb.s_flags |= MFSFLAG_CLEAN;
rw_super(SUPER_PUT);
printf("\n----- FILE SYSTEM MARKED CLEAN -----\n\n");
}
}
devclose();
}
int main(argc, argv)
int argc;
char **argv;
{
register char **clist = 0, **ilist = 0, **zlist = 0;
int badflag = 0;
register int devgiven = 0;
register char *arg;
if ((1 << BITSHIFT) != 8 * sizeof(bitchunk_t)) {
printf("Fsck was compiled with the wrong BITSHIFT!\n");
exit(FSCK_EXIT_CHECK_FAILED);
}
sync();
prog = *argv++;
while ((arg = *argv++) != 0)
if (arg[0] == '-' && arg[1] != 0 && arg[2] == 0) switch (arg[1]) {
case 'd': markdirty = 1; break;
case 'p': preen = repair = automatic = 1; break;
case 'y':
case 'a': automatic ^= 1; break;
case 'c':
clist = getlist(&argv, "inode");
break;
case 'i':
ilist = getlist(&argv, "inode");
break;
case 'z':
zlist = getlist(&argv, "zone");
break;
case 'r': repair ^= 1; break;
case 'l': listing ^= 1; break;
case 's': listsuper ^= 1; break;
case 'f': break;
default:
printf("%s: unknown flag '%s'\n", prog, arg);
badflag = 1;
}
else {
chkdev(arg, clist, ilist, zlist);
clist = 0;
ilist = 0;
zlist = 0;
devgiven = 1;
}
if (!devgiven || badflag) {
printf("Usage: fsck [-dyfpacilrsz] file\n");
exit(FSCK_EXIT_USAGE);
}
return(0);
}