Like arp(8), this utility already uses the NetBSD 8 protocol for
talking to the operating system through routing sockets.
Like arp(8), this utility is not fully functional, due to limitations
of lwIP. While ndp(8) should provide a proper (read-only) view of the
contents of the Neighbor Discovery table, any attempts to modify the
table will fail. In addition, various other ndp(8) features are not
supported. On MINIX 3, the prefix and default router lists are not
managed by the operating system however, but rather by dhcpcd(8);
therefore, an implementation of the features related to those lists
would not provide any actual functionality.
Change-Id: I479bfc8141ba69fe50c1b2f7091933267ce6fa3e
For now, printing of Sun RPC requests is disabled because we do not
yet have the RPC header files. This should affect basically noone,
as we do not have any RPC-based programs yet, for the same reason.
Change-Id: Ie7818faaaacdc104d8b2c37a68866b4ce18247d6
As part of this, we import bpf_filter.c from NetBSD. Even though that
file is part of the NetBSD kernel, it is also used by userland (as is
clear here). Our LWIP service has its own bpf_filter.c implementation
but that implementation has certain limits (e.g. on program size) that
are fine for a system service but should not apply to userland.
The libpcap code has a number of blocks guarded by __NetBSD__, but
none of those blocks apply to MINIX 3. In particular, some of the
alignment logic used for NetBSD may in fact not work in our case.
Change-Id: Ib187e22d627c929e111d5d4a991c3bee3c0154cb
Also known as ISC bind. This import adds utilities such as host(1),
dig(1), and nslookup(1), as well as many other tools and libraries.
Change-Id: I035ca46e64f1965d57019e773f4ff0ef035e4aa3
The port could be improved by adding support for pselect(2).
Other than that, this port has a few MINIX-specific changes:
- we undefine IN_IFF_ flags to stop dhcpcd from thinking that we have
operating system support for link-local IPv4 address management;
- we work around one crash bug that seems triggered by using dhcpcd
on some but not all interfaces;
- we add "noalias" to the default dhcpcd.conf(5) configuration file.
Change-Id: I8a81c2c2af353c5ce08335673b1ab2d4b39178da
Behaviorally this port should already be largely on par with the
NetBSD 8 version, in that it sets the RTF_LLDATA flag on routing
socket requests to indicate that they target link-local data.
Many parts of the arp(8) functionality are currently not yet supported
by the operating system, largely due to lwIP not exposing appropriate
means of implementing them.
Change-Id: Icfac054b4deddda03eee4acf0e261aa48cd031ba
The port forces the use of sysctl(7), as obtaining information through
KVM is not and will never be viable. The sysctl mode of netstat(1) is
currently somewhat limited and buggy, though. We fix a few minimal
issues, but more improvements will have to come from NetBSD reimports.
Some of netstat(1)'s views are currently not supported by the
operating system. Later improvements on this point will not require
changes to the imported code, though.
Change-Id: If74a6811f0fc81bd1ecc31010a28379b14b2a0eb
Not all of its functionality is actually implemented in the operating
system. In addition, a few modules (agr, vlan) have been disabled
because we have not imported the necessary headers yet.
Change-Id: I4c9271065d640bd9112b4bd27e2652e1d51b18b4
Also retire support for the MINIX versions of /etc/hosts and
/etc/resolv.conf. These files will be brought back with NetBSD
imports, although like NetBSD, MINIX 3 will be using external
resolvers directly from then on. Since resolv.conf is hand-created
rather than installed, we do not mark it as obsolete.
Change-Id: Ie6154d5a4d8d977c19b9754bf920ae868680e9d1
This commit (temporarily) leaves MINIX 3 without a TCP/IP service.
Thanks go out to Philip Homburg for providing this TCP/IP stack in the
first place. It has served MINIX well for a long time.
Change-Id: I0e3eb6fe64204081e4e3c2b9d6e6bd642f121973
This new implementation of the UDS service is built on top of the
libsockevent library. It thereby inherits all the advantages that
libsockevent brings. However, the fundamental restructuring
required for that change also paved the way for resolution of a
number of other important open issues with the old UDS code. Most
importantly, the rewrite brings the behavior of the service much
closer to POSIX compliance and NetBSD compatibility. These are the
most important changes:
- due to the use of libsockevent, UDS now supports multiple suspending
calls per socket and a large number of standard socket flags and
options;
- socket address matching is now based on <device,inode> lookups
instead of canonized path names, and socket addresses are no longer
altered either due to canonization or at connect time;
- the socket state machine is now well defined, most importantly
resolving the erroneous reset-on-EOF semantics of the old UDS, but
also allowing socket reuse;
- sockets are now connected before being accepted instead of being
held in connecting state, unless the LOCAL_CONNWAIT option is set
on either the connecting or the listening socket;
- connect(2) on datagram sockets is now supported (needed by syslog),
and proper datagram socket disconnect notification is provided;
- the receive queue now supports segmentation, associating ancillary
data (in-flight file descriptors and credentials) with each segment
instead of being kept fully separately; this is a POSIX requirement
(and needed by tmux);
- as part of the segmentation support, the receive queue can now hold
as many packets as can fit, instead of one;
- in addition to the flags supported by libsockevent, the MSG_PEEK,
MSG_WAITALL, MSG_CMSG_CLOEXEC, MSG_TRUNC, and MSG_CTRUNC send and
receive flags are now supported;
- the SO_PASSCRED and SO_PEERCRED socket options are replaced by
LOCAL_CREDS and LOCAL_PEEREID respectively, now following NetBSD
semantics and allowing use of NetBSD libc's getpeereid(3);
- memory usage is reduced by about 250 KB due to centralized in-flight
file descriptor tracking, with a limit of OPEN_MAX total rather than
of OPEN_MAX per socket;
- memory usage is reduced by another ~50 KB due to removal of state
redundancy, despite the fact that socket path names may now be up to
253 bytes rather than the previous 104 bytes;
- compared to the old UDS, there is now very little direct indexing on
the static array of sockets, thus allowing dynamic allocation of
sockets more easily in the future;
- the UDS service now has RMIB support for the net.local sysctl tree,
implementing preliminary support for NetBSD netstat(1).
Change-Id: I4a9b6fe4aaeef0edf2547eee894e6c14403fcb32
The getnucred() function was used by UDS to obtain credentials of user
processes in a form used in the UDS API, namely the ucred structure.
Since the NetBSD merge, this structure has changed drastically (aside
from being renamed to "uucred"), and it is no longer in UDS's best
interest to use this structure internally. Therefore, getnucred() is
no longer a useful API either, and instead we directly use the
previously private getepinfo() function to obtain credentials.
Change-Id: I80bc809de716ec0a9b7497cb109d2f2708a629d5
A pair of manual pages were already present in /usr/share/man, but
not yet installed. Install them as well. Lots and lots more from
NetBSD's set of manual pages should be imported, though.
Change-Id: Ie2e8946967afcb2e71de563f06fa331586dcb31d
IMPORTANT: this change has a docs/UPDATING entry!
This patch performs an initial import of the infrastructure and a
subset of the NetBSD set of rc startup and shutdown scripts. The
"initial" refers to the fact that this is not yet a full switch to the
NetBSD rc system: the MINIX ramdisk rc script, which (typically) runs
as the first thing, is kept as is. After mounting the root file
system, the ramdisk rc script will start the NetBSD rc infrastructure
by invoking /etc/rc, however. The regular MINIX startup-and-shutdown
script has been moved from /etc/rc to /etc/rc.minix, and is now
invoked as part of the NetBSD rc infrastructure through a bridge rc
script /etc/rc.d/minixrc. /etc/rc.minix invokes /usr/etc/rc as before.
Switching over the ramdisk to the NetBSD system and decomposing the
MINIX rc.minix script into smaller components are left to future work.
Also, the current pkgsrc etc/rc.d auto-start functionality is left as
is, even though it should be removed (see the etc/usr/rc comment).
Change-Id: Ia96cae7c426e94b85c67978dc1307dacc4b09fc5
This requires importing a few files from mail(1) already. Importing
the rest of mail(1) is left to future work.
Change-Id: If96513a306245cd7fb64660758d0dbd29a36e87c
IMPORTANT: this change has a docs/UPDATING entry!
This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well. The two can obviously not coexist.
Also move ours from /bin to /sbin, as it is a superuser-only utility.
Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
This small change makes it easier to do sorts without having to deal
with these entries over and over again.
Change-Id: Id5077a17733fa4b535cdc9881109286335d3cb17
A few MINIX3-specific changes are necessary due to the fact that we
are missing the System V IPC message queue system calls.
Change-Id: Idd252984be9df69618cef79bcf6c676cbf915d85
